Borderless Printing

I am trying to print out a simple, single picture as a 4x6 glossy print.  I have checked all setting in LR and for printer (e.g. paper size, orientation, margins) and still get a wide white border with a shrunken version of my image scaled and centered in the middle of my 4x6 paper.  How should I correct?

You have to choose borderless printing and the paper size in the page setup option, which allows you to make choices in the printer driver. Then, in Lightroom, in the Layout panel, you adjust your margins, which you would set to 0, and then you would set the cell size.

Similar Messages

  • Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

    Hi,
    I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
    On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
    Please let me know how to print the borderless print in A4 sheet.
    Regards,
    Jaya

    Hello revlib,
    Welcome to the HP Support Forums!
    Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
    To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
    Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
    Let me know if this has help
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Borderless printing with Adobe reader or acrobat and HP Officejet Pro 8100

    Hello,
    When printing borderless with my Pro 8100 the printed pdf moves about 2mm to te left on the paper. (White vertical strip on the right side is the result and on the left side something is missing!).
    What causes the problem seems to be that the HP Pro 8100 printsoftware makes the A4-format a littlebit larger (214,55 x 300,91) than an actual A4-format (210,00 x 297,00) when you choose borderless printing.
    Therefore, I suppose that the pdf shoud be centered before printing. Adobe reader doesn't seem to have the possiblity to center the page however.
    Any tips?

    The borderless printing option is intended to print photo's on photo paper.  When printing borderless the print is slightly oversized to eliminate (or reduce) to chance for white edges due to media skey.  Depending on your operating system you may have a setting in the Advanced tab of the driver for Overspray, set this to minimum and see if it helps.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How Do I BORDERLESS PRINT on Epson RX500 in 10.4.7?

    Hello,
    When I set up my Epson RX500 All-In-One printer/scanner I was using 10.3 Panther.
    The Print Setup Utility looked just like it does in the setup guide that comes with the unit.
    I never used Borderless Printing but in the "Printer List" it showed Stylus Photo RX500 and Stylus Photo RX500(Sheet Feeder - Borderless).
    Now a year later (after upgrading to 10.4.7) I want to do some borderless printing with 4x6 and 5x7 photo paper but the "Stylus Photo RX500(Sheet Feeder - Borderless)" listing is not there anymore.
    Also the Printer Setup Utility has changed. The screens aren't like they were in 10.3 (where I select EPSON USB from a pull-down menu, etc).
    I went to the Epson Website to download new drivers but they only have
    TWAIN Driver and EPSON Scan Utility v2.65A for Macintosh OS X (v10.2.x - 10.3.x)
    OR
    Printer Driver v3.0aAs for Intel-based Macs with OS X (v10.4.4 or later). There isn't one for PowerPC 10.4.
    I CAN print a supposed 4x6 borderless print using Page Setup and "4x6 Borderless" setting for Paper Size but it doesn't come out borderless -- it has borders. There is a 5x7 setting but it doesn't say borderless.
    Any help with this problem? I really would like to see the "Sheet Feeder - Borderless" in my Printer List again and do some true bordeless printing!
    Thanks!!
    PowerMac FW800 (G4), iMac G4 800 SuperDrive   Mac OS X (10.4.7)  

    Thank you so much that was a big help.
    After you do that, though, you have to click on the Page Setup drop down menu and select Borderless Sheet Feeder instead of Standard from the list -- that's the part I wasn't doing. It defaults to "Standard", whatever that is, and doesn't make the Borderless Printing available if you don't change it.
    After that, though, I couldn't get the border even when I wanted one (which I do sometimes) using the RX500 regular setting (NOT borderless) -- it's makes about a 1/10" border instead of a 1/2" one.
    FWIW I found that if you then delete Borderless Sheet Feeder (that I tried so hard to get!) from the Printer List and re-start the computer you will then have true border printing again! Re-install Borderless driver to get true borderless again (ugh). I guess I'll have to do that because sometimes I want borderless and other times I don't.
    Thanks!!

  • Borderless printing from Windows 7 64 to a shared printer on XP Pro system.

    I recently bought a new dv7 HP laptop with Windows 7 64 bit to replace a Dell laptop running XP.  The XP laptop and other XP systems can print to my HP PSC2410 connected to a XP pro system fine.  The XP systems can print both 8x10, 5x6 or 4x6 borderlessly fine.  However, the new HP laptop with Windows 7 does NOT even have the option of 4x6 or 5x7size paper!  If I connect the printer directly to the win7 system, that works, but when I print to the same printer via the XP pro "shared printer", most of the paper size options go away.
    I found a post that shows how to present a 4x6 paper size option to the win7 system which now works, but borderless printing to the 4x6 paper doesn't work.  The 4x6 photos all print with thin white borders.  Please tell me I don't have to replace my PSC2410 printer in order to print from my new windows 7 system (borderlessly) via a network!
    Help

    I recently bought a new dv7 HP laptop with Windows 7 64 bit to replace a Dell laptop running XP.  The XP laptop and other XP systems can print to my HP PSC2410 connected to a XP pro system fine.  The XP systems can print both 8x10, 5x6 or 4x6 borderlessly fine.  However, the new HP laptop with Windows 7 does NOT even have the option of 4x6 or 5x7size paper!  If I connect the printer directly to the win7 system, that works, but when I print to the same printer via the XP pro "shared printer", most of the paper size options go away.
    I found a post that shows how to present a 4x6 paper size option to the win7 system which now works, but borderless printing to the 4x6 paper doesn't work.  The 4x6 photos all print with thin white borders.  Please tell me I don't have to replace my PSC2410 printer in order to print from my new windows 7 system (borderlessly) via a network!
    Help

  • Borderless Printing issues with HP Officejet 4500

    I have created a document using Microsoft word 2007 and am having trouble printing this document without borders. I have a HP Officejet 4500 which does support borderless printing. I have gone into properties when getting ready to print and made sure to check the borderless box. I am still left with a small 1/8 inch border around the entire page. I tried the shortcuts and selected brochures with the same results. I also tried changing the settings through word. I went into page set up and made the margins "0.0" on both sides as well as the top and bottom of the page. It still prints with borders. What am I missing???? Any help would be greatly appreciated.

    Having the same issue. I tried to print boderless from many different programms and with all settings I could choose. I get out a full photo or document after maybe 20 prints. Everytime the printer wants to print at least 2 pages, stops printing after 10-50% and restarts again.
    I really would like to hear back from HP.

  • I just bought a C4680 all-in-one new in box. It puts an irregular border around "borderless" prints

    I just bought a C4680 all-in-one new in box.  It puts an irregular border around "borderless" prints (at least in 8.5 x ll size) --border is about 1 inch on right, 3/4 at top, 3/8 at bottom and 3/16 at left.  How do I eliminate this?
      Using win XP.

    In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
    In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
    Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

  • Borderless printing in Aperture 2

    I just upgraded to Aperture 2.0 and I can no longer make borderless prints on my Canon Pixma Pro9500. I ran the "Printer Calibration" wizard that is supposed to center the image but it made no difference. Here is my workflow using 8x10 paper.
    Edit Image
    Crop to 8x10 proportions
    Select "8x10 borderless" as media size in printer dialog box
    Select "Fill Page" under "Scale to..." menu
    Move "Border Width" slider to "0"
    Print
    I get a small border all the way around the image, the same image will print fine from PS CS3 or Lightroom.
    Any ideas?
    Thanks,

    JB,
    The trick to solving this is making an adjustment within the "Printer Settings" from the Aperture print dialogue box. This is the same place where you select paper type and print quality. In the drop down menus select "Borderless Printing." Here you can adjust the amount of extension on your borderless prints. If I have the slider all the way to the left, to "min", I get the same very slight white border all the way around the edge of my prints with either my iP8500 or iP6700D. Moving the slider one step to the right gets rid of the white border and gives me a true borderless print.
    Now, the catch is I lose just a bit of the image on the bottom and top. Not much, but a a few pixels. I've learned to crop a little bit wider to accommodate. I hope this helps with your issue.

  • D7263. Wrong printout colors under Vista/Wron​g borderless printing.

        Getting dull colors while printing under Windows Vista from Print Manager or any application (Photoshop CS3). Colors are as expected (ok) while I print those photos under XP virtual machine (from under Vista Ultimate).
        Another problem is stupid results with borderless printing.Though I prepare dimension of the photo to match paper size (lets say 4x6inch x 600dpi), using borderless printing option, I always get printouts cutted  about 0,2 inch on EVERY side.
        I got strange result from HP online consulting in July or August: "We do not have correct driver for Windows Vista yes. That's why you have those problems. We expect new driver SOON."
        As the latest version of the Vista driver is 10.0 (02/2008) and I use it, I do not know how to use my Photosmart for photo printing under Vista...
        Any  suggestions?

    system ink has failuor

  • Lightroom 2.6 Problem Printing Borderless Prints on Epson R800

    I have used Lightroom to print borderless prints (using the paper setting - borderless -sheet feeder) and all has worked fine until I downloaded the new Apple Epson driver.  I found this new Apple driver did not work well as the colours were washed out.  So, I went back to the current Epson driver for Snow Leopard (OSX 10.6.2) and I can print again.  (The prints are now a bit dark but that can be addressed).
    However, I now find I cannot print borderless prints (i.e. with no white edge) via Lightroom 2.6 using the current Epson driver and paper setting of borderless sheet feeder.  The printer responds with "media not loaded correctly".  When I go to Photoshop CS4 or iPhoto, I can print borderless prints. So, something is going on in Lightroom.
    Any suggestions?  Except of course to print borderless prints from Photoshop.

    Sam,
    I am still working on a similar problem with one of my Epson printers. The newer Epson R280 (may be R290 outside the US) works just fine with borderless. The older SP 2200 does not. I have been in communication with Epson, but not yet resolved. For most printers the newest software referenced for Leopard is with EasyPrint, but with this old 2200 the driver referenced is still not nearly as recently released as the EasyPrint frame work. The reply I got back from Epson was not satisfactory because it ignored the fact I am connected to my 2200 via Firewire and not USB, and all reference in the reply was to USB connection. Despite doubting the usefulness of the reply, I will have to move my 2200 much closer to the computer to try connecting with USB, and I simply have not tried it, since I doubt it will help.
    My issues with borderless on the SP 2200 are also present when printing borderless from Photoshop CS3 and from Pages. Thus it seems more a problem with Leopard than with Aperture.
    Sorry to not be more helpful or hopeful, but I think drivers for some printers are not fully tuned to printing in Leopard.
    Ernie

  • HP messed up my borderless printing

    I have always been able to do borderless printing to my Lexmark 705 printer by setting print margins to zero in the Print Set-up dialog. Unforunately, I recently installed an HP printer. Now, all my printers ignore the page margin settings, always printing in the middle of a 11x8.5 when doing borderless printing. HP even had a statement in the documentation stating, "If you have problem printing from an application with borderless printing, print from one of the HP supplied applictions".
    After uninstalling the HP driver, and installing a printer driver for a Brother 440 CN, I am still unable to print a borderless page using a page margin of 0, to either printer; the image still prints centered on a 8.5x11.
    I believe that HP mucked with some settings in CUPS that their uninstaller didn't fix. Someone have an idea of a setting somewhere in CUPS printing system that might return my borderless printing back to the origin behavior?

    I have always been able to do borderless printing to my Lexmark 705 printer by setting print margins to zero in the Print Set-up dialog. Unforunately, I recently installed an HP printer. Now, all my printers ignore the page margin settings, always printing in the middle of a 11x8.5 when doing borderless printing. HP even had a statement in the documentation stating, "If you have problem printing from an application with borderless printing, print from one of the HP supplied applictions".
    After uninstalling the HP driver, and installing a printer driver for a Brother 440 CN, I am still unable to print a borderless page using a page margin of 0, to either printer; the image still prints centered on a 8.5x11.
    I believe that HP mucked with some settings in CUPS that their uninstaller didn't fix. Someone have an idea of a setting somewhere in CUPS printing system that might return my borderless printing back to the origin behavior?

  • Borderless printing - trailing white edge

    I've far more experience printing from PCs than Macs (used to use QImage on those), and am well aware of issues like overspray/borderless extension settings to rpoduce borderless prints.
    Anyhow I cannot get a 6x4" borderless print to print without as trailing white edge from iPhoto - not sure if this is because there's no page setup menu option.
    When you click print, the first screen shows the photo filling the 'canvas', but if I print there's a 7mm trailing white edge.
    This white edge is also evident if I hit preview rather than printing straight off.
    I can print the photo from Preview/Lightroom with no problems with whta seem to me to be identical settings.
    Printer is a Canon iP5000.
    I don't think iPhoto is centering the image properly on the page as an equal amount of photo is chopped off the top.
    There's at least 1 other thread but no solution on that.
    I'll try the other printers to see if I have problems with those too.
    AC

    Did you ever get a solution to your problem? I was looking into another issue and saw your post. I use a Canon i850 printer and in the print preview window I get a white sliver at the top and right of the image. However, it does not print that way.
    Have you tried going to the Advance print menus and under the Paper Handling-Destination Paper Size menu section checked the radio button "Scale to fit paper size:"?
    Do you Twango?

  • J4540 "Borderless Printing Error"

    I'm attempting to print a booklet, side-fold brochure.  My paper size setting is Borderless 8.5X11.  I've printed this brochure many times before using the exact same settings with no problems.  However, when I tried to print today, I had only a black ink cartridge installed; I got an error message reading "Borderless Printing Error: Borderless printing cannot occur with only the Black Ink Cartridge installed. To print a Borderless Photo, install either a tri-color print cartridge, or a photo print cartridge."
    Even though the brochure I'm printing is black & white (and it was set on "print in grayscale"), I did have a new Officejet 901 Tri-Color Ink Cartridge handy. So I installed it and received a message that the new cartridge had been detected.  Then I scanned the sheet to align cartridges.  The printer said something like "Installation successful".  However, everytime I try to print this brochure page, I still get the same error message:  "Borderless Printing Error: Borderless printing cannot occur with only the Black Ink Cartridge installed. To print a Borderless Photo, install either a tri-color print cartridge, or a photo print cartridge."        
    I tried re-starting, unplugging, etc., but I can't get it to print -- even though I'm using the same settings I have before. I went online and tried printing a couple of color pages and it printed them out just fine -- so the color cartridge is working. Not sure why I keep getting this message.
    I'm no expert on this stuff, and any help/advice would be appreciated.  Thanks a bunch,
    Jason 

    I wish I could help you, and I'm unhappy to see that you put this message up in April and have no response yet.
    I too get this "cannot print" message - not that the cartridge is missing, but that I cannot do borderless printing with ONLY the black cartridge. I have the color cartridge installed, I've done prints of the same pages before, and I cannot seem to get the printer (HP Photosmart C4780 wireless) printer to work when that message comes up. I'd love to get some help from HP.
         Some things I've tried. On my iMac I shut down all applications that are not necessary, and relaunch my finder. I think that clears out its brain a little. Then I'll try to print again (It just worked - same exact page).
         Also, sometimes I open the HP Utility and ask it to print a test page. That also seems to clear it's brain. After that it worked also.
        I think there's a sometimes "glitch" in the program. Cleaning things out as much as possible, and starting over again seem to help.  GOOD LUCK!

  • Borderless Printing Problems - C309g-m

    I have developed a problem when trying to create borderless prints with my C309g-m All-In-One.  Recently I have begun to see a margin on the right side and bottom of prints that are supposed to be borderless.  When I first set up the printer, borderless printing was as expected.  It seems that after an update (as best I recall) the borderless prints began to appear with the white stripes (between 0.1 and 0.2 inches) as noted above.  The white stripes occur whether printing 4x6 (my normal print size) or 8.5x11. (the border stripes appear slightly bigger on this size).
    The stripes appear whether i print from Qimage or Photoshop so they do not appear to be specific to the software used.  Qimage shows a fixed border of 0.0017" on the right and bottom with 0's for the left and top.  Any clues as to what might have happened and how I can "fix" it to once again print borderless.
    Larry

    Hi folks,
    I understand you are all experiencing a white border on the right and bottom of your prints when printing borderless.
    The first thing I would suggest is for you to do a copy of a borderless photo to test the hardware. If the hardware prints with no issue then the issue is related to the computer, possibly the settings or the driver.
    If the issue persists please post back with the following information.
    Operating system and version. Mac or Windows.
    Program you are printing from.
    Thanks, looking forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Borderless Printing Help

    I really need some borderless printing help. I finally figured out with my printer, that the bottom margin is ridiculously offset so I need to use borderless printing to prevent the bottom footer from being cut off (HP 2610 printer, margins being read are .07"-top, .13"-right&left, .56"-bottom).
    I know there is a way to choose borderless from the page setup screen. And I tried looking in the system preferences to see if I could choose borderless as the default but there doesn't seem to be a way as far as I can see.
    Does anybody know if there is a way to override the settings and make the borderless 8.5x11 the default paper size instead of the standard US letter?
    BTW I am looking to do this on a system-wide basis since multiple programs have this problem, but if anyone knows of ways to do this specifically in Pages or Word that would be helpful too.

    Got it to work in MS Word 2004. Any idea of how to get it to save in Pages 2? I choose to Save As Default, but it keeps reverting back when I open a new document.

  • Borderless Printing Problem

    Windows XP Pro, Indesign CS3, HP K8600 Deskjet Pro Printer. I am trying to print a borderless document. Printer does have borderless feature. I cannot get the document centered. A quarter inch white border appears on the right side of the document and a half inch border appears on the bottom. . Settings I am using in the print setup are as follows: Paper size "Borderless 8.5X11"; Page position "Centered"; also tried Page position "Upper Left"; Printing Shortcuts "Borderless Printing"; Under Features tab "Borderless 8.5X1", "Print Actual Size" and check "Bordrless". Document will print borderless and centered in HP Photosmart application but not in Indesign so I don't think it's a printer problem.

    It's the top item on the Paper Size menu-drop...
    I think that's your only way out because "borderless" printing is essentially unsupported by InDesign and sort of defies its logic.

Maybe you are looking for

  • How to make a report in RME to display all POE capable devices

    Hello, I need to create a report that will list switches in my network that support POE. Most of our switches are 3750 stack and I know most of them have POE capabilities but whenever I generate the report under RME POE Port Level Report or POE Repor

  • PLS-00455: cursor 'CUR_1' cannot be used in dynamic SQL OPEN statement

    create or replace function f_my_test_func return refcur_pkg.refcur_t1 is cur_1  refcur_pkg.refcur_t1; begin open cur_1 for 'select * from dept'; return cur_1; exception when others then insert into ddl_log (SQLTEXT) values ('fucntion error');  end;

  • Speeding up footage

    How can you speed up the footage you have on Imovie? to clarify - if i have footage of someone cutting hair and its runs 15 minutes but i want to show the whole cut in fast motion and condense it to 2 minutes how would i do that? Is it even possible?

  • Inventory transfer Discount through DIAPI not working.

    Dear Expert, I try to add a inventory transfer through DIAPI, every field success, except Dicsount Percent. I'm using SAPB12007APL49. Just a simple code: oStockTransfer.Lines.DiscountPercent= 3.00 The inventory transfer successful added, BUT without

  • Can't trasfer rented movie to iPod Classic

    I can't transfer a rented movie onto my iPod Classic. It's definately an iPod Classic, not a 5th. Gen., and I've watched rented movies on it before. When I try to drag the rented movie onto the iPod in iTunes it says the movie won't transfer becuause