Borderless prints in elements 10

I used to get borderless prints in elements 3 but I can't in elements 10. I have the same printer and computer. Why? Help.

Hi Maria,
Can you check you border setting under Printing Choice of your PSE's print dailog.
To reach there , launch Print Dialog, then Click on More Options button and then check border values settings under Printing choice.
If you want to print borderless, uncheck the check boxes present under border category here.
Please give it a try and let me know whether it helps you.
Also please check wether the Printer, that you are using, supports borderless Printing. To check thi go Printing Prefrences of your Printer and check "Borderless" check box.
~Tywin

Similar Messages

Are borderless prints possible in Elements 4 for Mac?

I have worked in Elements 2 for years in Mac OS9 with lovely consistent results. Have now upgraded to Elements 4 for Mac (iBookG4, OS10.4.8,1.5G RAM) and am having problems. I am getting a handle on the processing menus, but cannot figure out how to print borderless prints. I have been doing it for years - 4x6, 5x7, 10x12 - in Elements 2 on my Epson Stylus Photo R300. I have tried setting parameters in the Print Preview dialogues, in my printer menus - cannot make it happen. I assume it is something I am doing incorrectly or not doing. Please help! Thanks.

Barbara,
I tried after downloading the most recent drivers - still no luck with borderless. I have emailed Epson Tech Support for suggestions. I am confused about the driver situation. I go to Print Preview (am still unsure of what selections to make here to get the proper orientation - it seems to do portrait when I want landscape and vice/versa) - I usually try 4x6 or custom and type in the actual dimensions to fill a 4x6 borderless (based on what I would do in Elements 2). Then I go to Page Setup - select the R300, then in Print I select the R300, 4x6 borderless and Premium Glossy Photo Paper. The Print Preview at that point still shows a border, atho it is grey, not white, and when I print, I get a white border. The orientation thing seems to be a bug - when I choose Landscape in the Printer driver, I get portrait in the Elements 'preview'. Sorry to go on so long, but I thought maybe there might be something in this that might give a clue - I really can't afford to buy a new printer right now, and have no idea how to look for a driver. Thanks for your patience.
Janet

Difficulty Printing Borderless Prints with Epson C84

When I had an iMac G3 with OS 9.2 and used the Epson menu for printing, I had no difficulty printing 4x6 inch borderless prints (since that is one of the options on the Epson Menu). But now that I am forced to use the OS 10 printing menu, even when I identify the printer as an Epson C84, crop the photos to fit a 4x6 page and show "0" margins on all sides when selecting 4x6 as paper size, using either iPhoto or Photoshop Elements 3.0, the prints come out with a small white border on all four sides. The Apple Menu with Epson as the chosen printer does not give me an option that says "4 x 6 borderless" when choosing the paper size. Is there something I need to set differently in order to get borderless prints?
hk Jones

I also had a problem finding the "Borderless" option in the print dialogue. Here's what Epson Support told me to do -- It worked perfectly. I can now print borderless from either of the two macs sharing my Epson 1280.
To correct the issue you are experiencing, we will perform a complete
removal of the files and reinstall the driver.
REMOVE FILES
1. Double click on the MAC HARD DRIVE
2. Double click on the LIBRARY folder
3. Double click on the PRINTERS folder
4. Drag the EPSON folder to the trash can
NOTE If you receive an access denied error message, this indicates that
you do not have root access. You will need to contact Apple for assistance
on obtaining Root Access.
1. Insert your 10.4 CD/DVD, double click on the CD/DVD icon on your
desktop.
2. Double click SYSTEM > INSTALLATION > PACKAGES > EPSON PRINTER
DRIVERS.PKG
Follow the prompts for the installation, restart your Mac when complete
Please follow the steps below to install the resident driver for your
printer in OS 10.4:
1. Make sure that your printer is turned on and connected to your computer.
2. Open your PRINTER SETUP UTILITY. This is found in HARD DRIVE,
APPLICATIONS, UTILITIES directory
3. If there are any entries for your printer click on them and hit the
DELETE. Once they are all gone Click ADD, then MORE PRINTERS at the bottom
of the printer browser.
4. In the window that appears, select EPSON USB from the drop-down menu at
the top, then highlight your printer when it appears under NAME , under
PAGE SETUP select ALL, and then hit ADD.
5. Quit out of the printer setup utility and try printing from any OS X
application.
To set up your printer for borderless printing in OS X please follow the
steps below.
After you have installed your printer driver for OS 10, you will need to do
the following to add extra paper features such as borderless printing
options:
1. Go to Printer Setup Utility (found in HD > Applications > Utilities).
Delete any existing references to the Epson printer from the list.
2. Go to Add. Select Epson USB for a USB printer or Epson Firewire for a
Firewire-connected printer.
3. Highlight the printer name when it appears under Product. Under "Page
setup" use the up-down arrows and select ALL.
4. Click Add. The new printer options will now be added to the Printer
list; you will see the printer name numerous times with different paper
selections attached. (If you are unable to see the full description you
will need to extend the name category.)
5. Highlight the printer name/feature which you wish to use (For example,
"Stylus Photo 2200 (Sheet feeder-Borderless)") and make it the default.
Close Printer Setup Utility.
6. Ensure Classic is not running. Open an OS X application and the file you
wish to print.
Setting up borderless prints in an OS X application (NOTE: not all
applications will show these options)
1. Click on FILE and PAGE SETUP. Ensure the settings below are adjusted:
SETTINGS: PAGE ATTRIBUTES
FORMAT FOR: EPSON STYLUS XXX XXX(BORDERLESS)
PAPER SIZE: Whichever compatible paper size you wish to use
(NOTE: borderless printing is not supported on custom paper sizes.)
Click OK when done.
2. Click on FILE and PRINT. Ensure the settings below are adjusted:
PRINTER: Stylus XXX XXX(BORDERLESS)
PRESETS: STANDARD
Make any other adjustments needed (on COPIES and PAGES, PRINT SETTINGS,
etc) and then click PRINT.

Custom Borderless Printing

Operating system Vista
Printer - C5180 All-In-One
Software PSP Elements v.7
I want to print borderless greeting cards on precut 6.5X10 cardstock. I was able to do this in PSP Elements v. 4 put cannot create the custom borderless size in v. 7.
I still have PSP v.4 installed and switch to it to print borderless but it becomes very complicated and I'm sure I shouldn't have to do this.
Also,shouldn't I be able to print borderless on non-photo papers?
Thanks for any help--Biscuit

Biscuit wrote:
Operating system Vista
Printer - C5180 All-In-One
Software PSP Elements v.7
I want to print borderless greeting cards on precut 6.5X10 cardstock. I was able to do this in PSP Elements v. 4 put cannot create the custom borderless size in v. 7.
I still have PSP v.4 installed and switch to it to print borderless but it becomes very complicated and I'm sure I shouldn't have to do this.
Also,shouldn't I be able to print borderless on non-photo papers?
Thanks for any help--Biscuit
Borderless printing is not supported with plain papers because ink near the edges of plain paper causes the paper to cockle, which would then tend to jam in the exit of the printer.
As for the issues with custom sizes in Elements 7 it seems that is an issue for Adobe to address. I do not have any suggestions there although you might try setting up the printer as if it had the nearest larges size and then adjust the borders in Elements so that it actaully prints borderless on the 6.5x10 media.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing with elements 12

I cannot print a 4 X 6 photo in Elements 12 but can in 11. I just bought a new printer but I do not think it is the printers problem. Any help would be appreciated

Is there something in the printer driver that needs to be ticked for borderless printing?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Hi,
I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
Please let me know how to print the borderless print in A4 sheet.
Regards,
Jaya

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Borderless printing with Adobe reader or acrobat and HP Officejet Pro 8100

Hello,
When printing borderless with my Pro 8100 the printed pdf moves about 2mm to te left on the paper. (White vertical strip on the right side is the result and on the left side something is missing!).
What causes the problem seems to be that the HP Pro 8100 printsoftware makes the A4-format a littlebit larger (214,55 x 300,91) than an actual A4-format (210,00 x 297,00) when you choose borderless printing.
Therefore, I suppose that the pdf shoud be centered before printing. Adobe reader doesn't seem to have the possiblity to center the page however.
Any tips?

The borderless printing option is intended to print photo's on photo paper. When printing borderless the print is slightly oversized to eliminate (or reduce) to chance for white edges due to media skey. Depending on your operating system you may have a setting in the Advanced tab of the driver for Overspray, set this to minimum and see if it helps.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How Do I BORDERLESS PRINT on Epson RX500 in 10.4.7?

Hello,
When I set up my Epson RX500 All-In-One printer/scanner I was using 10.3 Panther.
The Print Setup Utility looked just like it does in the setup guide that comes with the unit.
I never used Borderless Printing but in the "Printer List" it showed Stylus Photo RX500 and Stylus Photo RX500(Sheet Feeder - Borderless).
Now a year later (after upgrading to 10.4.7) I want to do some borderless printing with 4x6 and 5x7 photo paper but the "Stylus Photo RX500(Sheet Feeder - Borderless)" listing is not there anymore.
Also the Printer Setup Utility has changed. The screens aren't like they were in 10.3 (where I select EPSON USB from a pull-down menu, etc).
I went to the Epson Website to download new drivers but they only have
TWAIN Driver and EPSON Scan Utility v2.65A for Macintosh OS X (v10.2.x - 10.3.x)
OR
Printer Driver v3.0aAs for Intel-based Macs with OS X (v10.4.4 or later). There isn't one for PowerPC 10.4.
I CAN print a supposed 4x6 borderless print using Page Setup and "4x6 Borderless" setting for Paper Size but it doesn't come out borderless -- it has borders. There is a 5x7 setting but it doesn't say borderless.
Any help with this problem? I really would like to see the "Sheet Feeder - Borderless" in my Printer List again and do some true bordeless printing!
Thanks!!
PowerMac FW800 (G4), iMac G4 800 SuperDrive Mac OS X (10.4.7)

Thank you so much that was a big help.
After you do that, though, you have to click on the Page Setup drop down menu and select Borderless Sheet Feeder instead of Standard from the list -- that's the part I wasn't doing. It defaults to "Standard", whatever that is, and doesn't make the Borderless Printing available if you don't change it.
After that, though, I couldn't get the border even when I wanted one (which I do sometimes) using the RX500 regular setting (NOT borderless) -- it's makes about a 1/10" border instead of a 1/2" one.
FWIW I found that if you then delete Borderless Sheet Feeder (that I tried so hard to get!) from the Printer List and re-start the computer you will then have true border printing again! Re-install Borderless driver to get true borderless again (ugh). I guess I'll have to do that because sometimes I want borderless and other times I don't.
Thanks!!

Borderless printing from Windows 7 64 to a shared printer on XP Pro system.

I recently bought a new dv7 HP laptop with Windows 7 64 bit to replace a Dell laptop running XP. The XP laptop and other XP systems can print to my HP PSC2410 connected to a XP pro system fine. The XP systems can print both 8x10, 5x6 or 4x6 borderlessly fine. However, the new HP laptop with Windows 7 does NOT even have the option of 4x6 or 5x7size paper! If I connect the printer directly to the win7 system, that works, but when I print to the same printer via the XP pro "shared printer", most of the paper size options go away.
I found a post that shows how to present a 4x6 paper size option to the win7 system which now works, but borderless printing to the 4x6 paper doesn't work. The 4x6 photos all print with thin white borders. Please tell me I don't have to replace my PSC2410 printer in order to print from my new windows 7 system (borderlessly) via a network!
Help

I recently bought a new dv7 HP laptop with Windows 7 64 bit to replace a Dell laptop running XP. The XP laptop and other XP systems can print to my HP PSC2410 connected to a XP pro system fine. The XP systems can print both 8x10, 5x6 or 4x6 borderlessly fine. However, the new HP laptop with Windows 7 does NOT even have the option of 4x6 or 5x7size paper! If I connect the printer directly to the win7 system, that works, but when I print to the same printer via the XP pro "shared printer", most of the paper size options go away.
I found a post that shows how to present a 4x6 paper size option to the win7 system which now works, but borderless printing to the 4x6 paper doesn't work. The 4x6 photos all print with thin white borders. Please tell me I don't have to replace my PSC2410 printer in order to print from my new windows 7 system (borderlessly) via a network!
Help

Borderless Printing issues with HP Officejet 4500

I have created a document using Microsoft word 2007 and am having trouble printing this document without borders. I have a HP Officejet 4500 which does support borderless printing. I have gone into properties when getting ready to print and made sure to check the borderless box. I am still left with a small 1/8 inch border around the entire page. I tried the shortcuts and selected brochures with the same results. I also tried changing the settings through word. I went into page set up and made the margins "0.0" on both sides as well as the top and bottom of the page. It still prints with borders. What am I missing???? Any help would be greatly appreciated.

Having the same issue. I tried to print boderless from many different programms and with all settings I could choose. I get out a full photo or document after maybe 20 prints. Everytime the printer wants to print at least 2 pages, stops printing after 10-50% and restarts again.
I really would like to hear back from HP.

When I try to print, Photoshop Elements 10 crashes. Please help!!!!

When I try to print, Photoshop Elements 10 crashes. Please help!!!

did you download the installation files?
if yes, what files (names/extensions) and what sizes?
if no, copy your cd contents to a desktop folder and attempt to install from the desktop folder.

Printing from Elements 11 with a cannon IP8750 I get horizontal banding right across the print .The printer operates for a distance of 10/12mm then pauses and it does this right throughout the print. it will print perfectly well from aperture, iPhoto an

problems with cannon printing from elements 11 . Get severe horizontal banding from elements but not from other photo software help please

Anyone?

Why won't my printer (Brother HL2270DW) print out Elements User bi-monthly magazine? Screen says PDF format not supported or printer not connected (it is) or shows an empty screen. No other printing problems on any website.

Why won't my printer (Brother HL2270DW) print out Elements bi-monthly magazine. Screen says either printed not connected (not true) or PDF not supported of shows a blank document. No problems printing on any other website.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I just bought a C4680 all-in-one new in box. It puts an irregular border around "borderless" prints

I just bought a C4680 all-in-one new in box. It puts an irregular border around "borderless" prints (at least in 8.5 x ll size) --border is about 1 inch on right, 3/4 at top, 3/8 at bottom and 3/16 at left. How do I eliminate this?
Using win XP.

In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

Borderless printing in Aperture 2

I just upgraded to Aperture 2.0 and I can no longer make borderless prints on my Canon Pixma Pro9500. I ran the "Printer Calibration" wizard that is supposed to center the image but it made no difference. Here is my workflow using 8x10 paper.
Edit Image
Crop to 8x10 proportions
Select "8x10 borderless" as media size in printer dialog box
Select "Fill Page" under "Scale to..." menu
Move "Border Width" slider to "0"
Print
I get a small border all the way around the image, the same image will print fine from PS CS3 or Lightroom.
Any ideas?
Thanks,

JB,
The trick to solving this is making an adjustment within the "Printer Settings" from the Aperture print dialogue box. This is the same place where you select paper type and print quality. In the drop down menus select "Borderless Printing." Here you can adjust the amount of extension on your borderless prints. If I have the slider all the way to the left, to "min", I get the same very slight white border all the way around the edge of my prints with either my iP8500 or iP6700D. Moving the slider one step to the right gets rid of the white border and gives me a true borderless print.
Now, the catch is I lose just a bit of the image on the bottom and top. Not much, but a a few pixels. I've learned to crop a little bit wider to accommodate. I hope this helps with your issue.

Borderless prints in elements 10

Similar Messages

Maybe you are looking for