Borderless problem when printing with HP Photosmart K510A

help me with this one HP support is closed today, are you experiencing this borderless problem if printing bordless a part of the image gets cut off when printing right now I'm printing in 4R the when I "print preview" the image is not cut off but when the actual output of print its cut off in all 4 corners maybe a few millimeters
look at my watermark its cut off my aspect ratio is 3:2
I printed it on a 4x6 paper (4R) they have identical aspect ratio I even tried to cropped to 4R still it gets cut off or is this an HP printer problem
please help this is getting frustrating

can anyone help me with this one?

Similar Messages

Margin problem when printing with canon printer

When I try to print a pages document on my canon pixma ip4500 printer (which they sold me at the apple store when i bought the laptop), the bottom margin does not appear. There is a space only about half an inch under the last line of text. Everything looks fine on the screen, but i cant get to print it with a bottom margin. and i don't even know how to set it manually...
ps, the printer isnt set for a 8 1/2 by 14 sheet, it really is for a 8 1/2 by 11
Help me please!

That’s going to depend on what the document consists of. If it’s a single element such as a graphic or PDF, reduce the size. If it’s text, you can use a smaller point size, slightly reduce paragraph spacing, make a headline smaller, etc. If it’s text and graphic, reduce the size of the graphic(s) a little. But first, set your document margins to agree with your printer margins.
Walt

I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

I cannot select the Paper Size when I try to print with HP Photosmart B110a
The same printer was working OK with my old PC with OS Windows 7
However I got a new PC with OS Windows 8.1 64bit
I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
Do you know what may be the problem?
Thank you

Hello Nanu64,
Welcome to the HP Forums.
I see that you are having some issues when attempting to print from your computer.
I also see that you stated that not all the options are available in the printing preferences options. This could be because the installation was not complete or it failed.
I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software. Once the uninstall is complete, reboot the computer so that the changes take affect.
When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
The following download is the HP Photosmart Full Feature Software and Drivers. Save this download to the desktop of the computer so that it creates its own icon. This will make it easy for us to find when the download is complete.
Double click the new icon and follow the installation instructions. The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable. Connecting the usb cable before hand can cause an issue with the installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
Works fine printing from any other application.

I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

Problem when printing " " using XSL

I have a problem when printing the "<" .It is always printed as
"<" in the HTML file.
I wish to transfer a Javascript text . I tried
using CDATA . This is an extract of a portion in my XSL File
which uses CDATA.
<![CDATA[
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>");
}]]>
And this is what the HTML file contains
function createLOV(lov_name, array_touse) {
document.writeln("<select name='" + lov_name + "'>");
for (var i=0; i < array_touse.length; i++) {
document.writeln("<option value='" + array_touse[i] + "'>" +
array_touse[i] + "</option>"); }
document.writeln("</select>");}
I tried using the <xsl:text disable-output-escaping="yes"> but in
vain.
If i use < or &x3C; , i still get < in the HTML file.
How do I solve this problem. I'm using XSQL Servlet with JSDK2.1
both running on Sun Solaris2.6 .
Thanks in advance,
Suresh
null

Suresh Seetharam (guest) wrote:
: I have a problem when printing the "<" .It is always printed
as
: "<" in the HTML file.
: I wish to transfer a Javascript text . I tried
: using CDATA . This is an extract of a portion in my XSL File
: which uses CDATA.
: <![CDATA[
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>" +
: array_touse[i] + "</option>");
: }]]>
: And this is what the HTML file contains
: function createLOV(lov_name, array_touse) {
: document.writeln("<select name='" + lov_name + "'>");
: for (var i=0; i < array_touse.length; i++) {
: document.writeln("<option value='" + array_touse[i] + "'>"
+
: array_touse[i] + "</option>"); }
: document.writeln("</select>");}
: I tried using the <xsl:text disable-output-escaping="yes"> but
in
: vain.
: If i use < or &x3C; , i still get < in the HTML file.
: How do I solve this problem. I'm using XSQL Servlet with
JSDK2.1
: both running on Sun Solaris2.6 .
: Thanks in advance,
: Suresh
Currently, the parser does not support the xsl:output and
output-escaping mechanisms. We plan on adding support for this
in a future release.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Problems when printing help topics from OHJ

We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
(1) Spacing Errors (all printers had identical results)
Text with special formatting (<b>, <i>) often has either too much space or not enough space.
Links often have extra spaces underlined before or after the link, itself.
(2) When printing multiple help topics from the TOC (an entire branch in the tree):
On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
Is this a problem with the Ice Browser?
Thanks for the help,
Wendy Studinski

There are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
Not every font has this problem, so varying the font you are using might help the appearance when printed.
The other problem you report, problems with the images when printing multiple topics, is something that we will look into.

"Problem When Printing" error on Mac Mini

Hi all,
I just recently updated my Mac Mini from 10.3 to 10.4. Instead of Archive and Install I formatted and did a clean install.
I have my printer set up, however whenever I try and print anything from any application I get a very unhelpful "Problem when printing" error, and nothing prints.
I also get the same error when trying to save to PDF.
My printer is a HP Deskjet 3750, and the driver is the one included with 10.4 (as per HP's instruction), but I don't think it's a driver problem as Save to PDF gives me the same error.
I've already tried repairing permissions. Anyone know what could be causing this. Any help is greatly appreciated.
Thanks.

Bugger. PSR is often a winner
You could try installing Gutenprint 5.0.1 available from Sourceforge (it's about 15MB). It's an updated version of the included GIMP-Print drivers and may repair/replace/install some of the core files. Otherwise you may have to contact Apple and see if you can get 10.4.9 mailed to you.

Problem when printing booklets prints pages 1,2 and 11 as if I wants to print all

I am using XP and 2000 MS word
I am having a problem when printing booklets from time to time. I get it ready to print in booklet form with 12 pages and my printer gives me the options. “Print all” “current page” “selection” or “pages” Because it is booklet I want to print the first 4 pages to be folded and glued as a small book. When I inter 1-4 as the example shows some times it prints OK but about a week later it prints pages 1,2 and 11 as if it wants to print all. I thought it was the printer but think it could be in some setting of the word program or my computer it self.

Also does this (i.e. prints web pages over several pages despite changing settings) on my laptop at work with an HP printer. This started when I upgraded to Firefox 9.0.1.

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

Color management problem when printing

(sorry for the double post, since the problem affect both illustrator and photoshop and in fact also indesign) in decided to repost it here in the photoshop forum. thank you for any help!)
hi ! im in charge of a big print lab in a university. All macpro quad running on 10.6.4, CS5 all updated.
i have a major problem when printing from all 3 CS5 apps : Illustrator (being the worst), photoshop and indesign : each one produces a different print even if i use the SAME color management options (the application manage color using my own color profile file created with a i-one tool from greta macbeath and using eye-one match 3). im printing on a XEROX 7750gx laser printer. very cool printer never had trouble with colors before with it, in any case it was always the software part that was causing color problems (like i suspect in this case).
how can 3 softwares under the same application collection and brand, using the same color profile and options (IDENTICAL ! it's triple check all the options!) can produce 3 different prints when printing the same image (it's a color psd created under photoshop CS5) ?!
i remember having some trouble like this when we first got CS1 in our lab, but not this bad... i've checked everything... i realy don't know how to fix this problem...
the best setting so far is in Photoshop when the application manage the color and using my color profile file in perceptual mode. best output so far, not the best i had in the past, CS4 was way more perfect with color management.
i realy need to find a solition 'cause the students expect the color to be almost perfect (and they almost were using CS4 in the past...
thanx for any tips & help !
+

many thanx for your reply & help.
i've just recalibrated everything in my workflow : my screen (perfect!), my xerox 7750 color laser printer. i've recreated a new color profile file for the xerox color. and the same thing is happening : a kind of pink color all over my prints and every adobe's applications is printing different results. in photoshop i can manage the problem when forcing to print in perceptual mode. not perfect but it's fine. and with the other software specialy like ACROBAT and INDESIGN there's no option like this so it prints very badly. only option is to print in adobe 1998 rgb or SWOP cmyk (depending of the color space of the image of course)... the image is use for my test is RGB. images in CMYK are doing the same exact thing.
by the way for calibration is use an x-rite (greta macbeth) eye-one tool with eye-one match 3.6.3. i calibrate the screens and create color profile with this tool since ADOBE CS1 and never had this much trouble with colors...
here's a capture from photostop CS5 print dialog. when using the option "match print colors" you can see the image with all the PINK NOISE when using the print in RELATIVE colormetric mode (at the bottom right). using perceptual is "fine" (not color perfect but OK).
http://i53.tinypic.com/qzge12.jpg
it's worst in Acrobat and Indesign since i can't use perceptual colormetric print mode...
im realy starting to think that i better uninstal CS5 and go back to CS4...
thanx for your help !

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

Performance problem when printing - table TSPEVJOB big size

Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio Manera

Dear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM

Problem when working with package???Please, help me!!!

I got 3 .java files from one Java tutorial as follow:
Server.java (in package mygame.server)
Utilities.java (in package mygame.shared)
Client.java (in package mygame.client)
All the above files are placed in "E:\Java Programmes\source"
After compiling, i got correspponding .class files:
Server.class (placed in "E:\Java Programmes\class\mygame\server")
Utilities.class (placed in "E:\Java Programmes\class\mygam\shared")
Clients.class (placed in "E:\Java Programmes\class\mygame\client")
But when i run Server.class which contains main method, i got error as follow:
E:\Java Programmes>java class\mygame\server\Server
Exception in thread "main" java.lang.NoClassDefFoundError: class\mygame\server\S
erver (wrong name: mygame/server/Server)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
That was very puzzled for me. I cannot find out what wrong with my files. Please., any boby, help me!!! I always got this problem when working with package and managing files. Thanls a lot.

java -cp "E:\Java Programmes\class" mygame.server.Server

Problem when streaming with the CLI flash media encoder 2.5

I have a problem when streaming with Flash Media Encoder 2.5. When I run the GUI, everything works, but when I use the commandline with the same profile I have created using the GUI, it says it can't connect to the server.
I have to use this version of the encoder, because the other is not working with the server, and I have to create a program to remotely control the flash media encoder, so I have to use the CLI. What can i do to go over this problem?
Any help would be really appreciated. Thankyou.

First of all, thankyou.
There is no authentication needed. I can't use Flash Live Media Encoder 3 because it is not supported by the people which manages the server i have to connect to.
In fact, I don't know why they dont support it, but that is the way it is.
Through the GUI, i connect directly and without problems, without user/pass.
Thankyou again.

Nexus 1000V. problem when working with the console VMWare

I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.

Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert

Borderless problem when printing with HP Photosmart K510A

Similar Messages

Maybe you are looking for