BORGR 649 error message while posting with 105 mov type

Hi Gurus,
I faced a problem when I try to post with 105 mov type, when material doc is related to Inbound delivery.
Explained better:
I did a purchase order with inbound delivery confirmation.
I carried out Good Receipt (related to Inb delievery) with mov type 103 (blocked stock from PO)
When I try to post stock with 105 mov type, the following error appear:
"Movement type 105 not allowed as it is not assigned to item category"
Msg ID: BORGR
Msg no: 649
I already checked delivery item category configuration, movement types involved and transactions allowed for each mov types.
Take care that the error mentioned doesn't occur if posting is related directly to purchase order, instead of inbound delivery..
Thanks in advance
Regards
Ale

Hi Sandra_PF
in the inbound delivery the mov type is not 105, but 101 (correct, it's the default value for Inb delivery)
With transaction MIGO I do 2 different operations (in 2 different moments):
1°) Good Receipt referred to Inbound delivery (103 mov type - Blocked stock from PO)
2°) Stock posting with 105 mov type, to transfer stock from Blocked to Unrestricted
Here the system notice me that is not possible, because the mov type 105 is not assigned to the delivery inboud category.
Please note that we did the same thing in another system with the same configuration, without any problems..
Cheers,
Ale

Similar Messages

  • Posting with MM Movement Type 309 material to material: Error in WM

    Hello,
    i post an MM-Movement type (Bewegungsart) 309 (material to material).
    The MM-goods movement works, but then in warehouse mangagement there is a problem:
    The creation of the transfer order (Transportauftrag) stops in many cases.
    The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
    I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
    capacity of the bin location is not enough.
    The Problem is that I do a posting for example:
    001 010101                   to     922 Umbuchungzone    -->  Transfer order Pos 1
    922 Umbuchungszone  to    001 010101                    --> Transfer order Pos 2.
    And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
    How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
    Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
    I hope anybody can help me.
    Thanks.

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Error message while posting

    Hi,
    while posting the documents i have received an error stating that document is not created
    Message no RW609
    pls reply

    hey
    set ur control record in exit mode
    and run live pay roll than check simulation accounting

  • Permitted payee error message while posting an invoice

    HI,
       I already define permitted payee in the vendor master record.But when i am creating an invoice through FB60, in the payment segment we are having an option to select payee. When i am clicking F4, then it is giving me an error message stating that-
    No alternative payer/payee defined
    Message no. F5747
    Can anybody help me out in this. Points will be awarded.
    Thanks and regards,
    Shree.

    HI,
       I already define permitted payee in the vendor master record.But when i am creating an invoice through FB60, in the payment segment we are having an option to select payee. When i am clicking F4, then it is giving me an error message stating that-
    No alternative payer/payee defined
    Message no. F5747
    Furthur to this, when i am entering manually this number there, then it is giving me an error that
    Payee 7109 is not defined for account 1023861 in company code 3000.
    I am creating an invoice for company coe 4000 and the paying company code for this is 3000 while making payment throgh F110. But i see that this account exist only for the company code 4000 and not for the 3000.
    Main account is 1023231 and
    Permitted payee is 7109.
    Can anybody help me out in this. Points will be awarded.
    Thanks and regards,
    Shree.

  • ERROR message while posting SHIPMENT order

    Hi all,
    i have developed one program which can create a shipment order using BAPI_SHIPMENT_CREATE.After uploading, i have passed all the data to this FM.
    in my return parameter, i am getting only error message number & type of message but message  is blank.so it is very difficult to know what is the actual error.
    my error is like below
    message type -warning
    message no.-000
    message- (it is blank)
    i am getting 3 error message numbers. all are 000.so how could i solve this error.plz suggest.
    Regards
    pabitra

    Hi vasanth,
    Thanks for ur help. but i am getting only message no & type of message.message ID is also blank.i tried to find this message by debugging but can not succeed.
    type of message--warning
    message no--000
    so, how to find this message.plz suggest.
    Regards
    pabitra

  • Getting an error message when trying to do mov type 521

    Hello All,
    When we are trying to do Movement type 521 for a material and plant we are getting the error message and not allowing to do the movement.
    Please help us to solve this issue.
    Thanks in advance
    Kalyani

    Check your material master for a x-plant or plant specific material status.
    This status is probably customized to prevent movements.
    Obtain the person who has entered the status from material master change history and talk to them about what you are trying to do and if the status needs to be removed or you need to choose an alternative solution for your movement.

  • Post with 561 movement type without affecting MAP

    Hi all,
    I have a scenario for Raw Material with Moving Average Price.
    When posting inventory with movement type 561 we are able to enter the Amount in LC.  I have set the value here as 0.01 but once I post the document the Moving Average Price in MM03 changes with respect to this value.
    I would like to ask is there any way to book stock into inventory without affecting the Moving Average Price.
    Thanks.

    >
    jamison2004 jordan2004 wrote:
    > Hi,
    >
    > Sorry, let me elaborate my requirement.
    >
    > For example :
    > Current Moving Average Price is 1.5
    > Current Inventory Quantity is 1000
    > Current Inventory Value = 1.5 x 1000 = 1500
    >
    > Requirement :
    > Posting excess stock using 561
    > Receipt Quantity : 500
    >
    > After posting, I want the Moving Average Price to remain as 1.5
    >
    > Can you please tell me the solution for this?
    >
    > Thanks
    Do not enter any external value, just post the quantity, and SAP will not change the MAP.
    But of course your stock value will increase by 500 x 1,5
    there is NO WAY to post a quantity of 500 with no value   for a valuated stock managed material and keeping the MAP uneffected.
    if you post with value,  then the MAP keeps constant but your total stock value goes up.
    if you post with zero value, then the MAP goes down.
    OF course you can then change the MAP again with MR21, this will create the next accounting document then.

  • Error message while posting goods issue.

    Hi,
    Please help me with the following problem..
    I have created Sales Order, Delivery & also created the Transfer Order number. After creating Transfer ordering, while submitting post goods issue, when I click on PGI, I get
    "Posting only available for period 2002/10 to 2002/11"...
    As a resulf of the above, I am not able to complete Billing for all the sales orders I have created.
    Can somebody please help me with above?
    Regards
    Nadeem

    Use the MMPV transaction to check your current period. Since you have transactions already done you need to do closing for every month.
    If you are on an IDES system for training purposes you can do a fast transaction by removing the plant assignment from the company code. The use the MMPI transaction to set your current period. Remmber April is period 1 if you are are using the indian financial year and fiscal year variant k4.
    Then reassign the plant and now try posting It will allow you. But a word of caution. Never attempt to remove the plant asignment in the development system. It might cause errors. for that there is a separate note.
    regards
    Jude

  • Error message while posting of miro document.

    Dear All
    While making posting of parked miro document following error msg coming u201CPlanned Delivery cost for PO u2013 7777777 , 00010 incorrectly defined. u201C
    Pls. solve this issue.
    Regards,
    Vishal Kr. Sharma

    Hai,
    This problebm is software problem.u send it to sap authorities they can send a software .u can implement it, to post the document.
    Regards,
    V.Ramakrishnaparamahamsa
    sap mm consultant

  • Error message on account with giftcard/ move a giftcard to a new account?

    Like a few other people I have gotten the Error 11111 message whenever I tried to download anything. Well I was using my aol account and I decided to switch and see if a apple account would work, and it did. However, I just added my giftcard to my other account. Is there a way I can delete it from that account and add it to my new one.

    Click here and fill out the form for assistance.
    (34523)

  • Error while using BAPI_GOODSMVT_CREATE wiht movement type 311.

    Hi All experts,
    i am geting error msg, while using BAPI_GOODSMVT_CREATE wiht movement type 311.
    the error msg is " For reservation 0000443815 0000, no movements can be posted".
    Here is my code.
    IF I_ZMM_S_MBIB_LOT[] IS NOT INITIAL.
    *moving posting date and document date  to header
        GOODSMVT_HEADER-PSTNG_DATE = ZMM_S_MBIB_311-BUDAT.
        GOODSMVT_HEADER-DOC_DATE   =  ZMM_S_MBIB_311-BUDAT.
        LOOP AT I_ZMM_S_MBIB_LOT WHERE MENGE NE '0'.
          IF I_ZMM_S_MBIB_LOT-IND = 'X'.
    *moving material and plant ,stge_loc,qty and movement type  to header
            GOODSMVT_ITEM-MATERIAL       = I_ZMM_S_MBIB_LOT-MATNR.
            GOODSMVT_ITEM-PLANT          = I_ZMM_S_MBIB_LOT-WERKS.
            GOODSMVT_ITEM-BATCH          =  I_ZMM_S_MBIB_LOT-CHARG.
            GOODSMVT_ITEM-STGE_LOC       = I_ZMM_S_MBIB_LOT-SLGORT.
            GOODSMVT_ITEM-MOVE_TYPE      = '311'.
            GOODSMVT_ITEM-ENTRY_QNT      = I_ZMM_S_MBIB_LOT-MENGE.
            GOODSMVT_ITEM-ENTRY_UOM      = I_ZMM_S_MBIB_LOT-MEINS.
            GOODSMVT_ITEM-MOVE_MAT       = I_ZMM_S_MBIB_LOT-MATNR.
            GOODSMVT_ITEM-MOVE_PLANT     = I_ZMM_S_MBIB_LOT-RWERKS.
            GOODSMVT_ITEM-MOVE_BATCH     = I_ZMM_S_MBIB_LOT-UMCHA.
            GOODSMVT_ITEM-MOVE_STLOC     = I_ZMM_S_MBIB_LOT-UMLGO.
            GOODSMVT_ITEM-RESERV_NO      = I_ZMM_S_MBIB_LOT-RSNUM.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
            EXPORTING
              GOODSMVT_HEADER               = GOODSMVT_HEADER
              GOODSMVT_CODE                 = '04'
          TESTRUN                       = ' '
          GOODSMVT_REF_EWM              =
            IMPORTING
          GOODSMVT_HEADRET              =
              MATERIALDOCUMENT              = MATERIALDOCUMENT
              MATDOCUMENTYEAR               = MATDOCUMENTYEAR
            TABLES
              GOODSMVT_ITEM                 = GOODSMVT_ITEM
          GOODSMVT_SERIALNUMBER         =
              RETURN                        = RETURN.
          GOODSMVT_SERV_PART_DATA       =
          EXTENSIONIN                   =
        ELSE.
    Moderator message: duplicate post locked.
    Edited by: Thomas Zloch on Feb 23, 2011 11:46 AM

    Hi Sachin,
    Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
    Regards
    DKS

  • Data inconsistency: posting with restricted transaction type (FAA_POST047)

    Hi colleagues!
    I have the following error:
    Data inconsistency: posting with restricted transaction type
    Message no. FAA_POST047
    Diagnosis
    You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
    System Response
    Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
    Procedure
    Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
    According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
    Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
    Any ideas how to solve?
    Thanks in advance

    Hi Anton
    This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
    Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
    Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
    please verify and let us know the update. hope this helps
    Best Regards
    Jomon

  • Post extra goods recieved with 501 movement type

    Hello experts,
    I have a requirement that after PO, at the time of MIGO if extra quantity is received from vendor then that extra quantity should automatically get posted in background with movement type 501 and the actual quantity will work as normal.
    Like: if purchase order is of 100 quantity and quantity received from vendor is 150 then at present when i am trying to post error message is coming "quantity exceeded by 50 quantity" but I want this 50 quantity should get posted with 501 movement type automatically in background.
    How should I do this??
    Please help.

    HI
    Hi,
    Is it possible if I ask abaper to debug the code and insert some code within.
    Is it the right solution to insert programming lines within standard sap transaction code???
    NOT possible
    I have some question for you
    1) What will be accounting posting for 501 it will same as 101 or different
    it will different
    2) system will generate two accounting document or one
    If two how you will post MIRO ,because 501 not link with PO
    Regards
    kailas Ugale

  • Where to configure which stock type to post in a movement type?

    Hi,
    As we know , when we carry out a posting with a movement type, e.g. mvt. typ. 261, system will automatically post to unrestricted-use stock. And if mvt.typ. 331, system will post to QI stock.
    I'd like to ask where to configure movement type to let it know which kind of stock type(not special stock, like E,K,etc.) to post.
    i.e. if I create a new mvt. typ. , where can i set it to post to unrestricted-use , QI or Blocked stock?
    I can find T156M-BUSTM and T156M-ZUSTD are relevant to stock type posting, but i don't know where to connect these fields to movement types.
    Thanks in advance!
    Wesley

    Hi,
    Normally there will be two types of  moments available broadly.Material inflow and material outflow moments.During outflows we tell the system to take the stocks from which stock type and storage location and during inflows we tell to post to which stock type and sorage location.
    The moment type 261 is a issue against an order and which has always to be from unrestricted .
    and 331 is to issue towards stock to Quality inspection.
    During inflows we can tell to the system through material master,vendor,or purchasing document to get posted to which stock.
    For outflows system always takes from unrestricted and issues and if there is no stock in the storage location unrestricted , system provides a error message.
    But however you can create a moment type at SPROMMIMMoment typescreate (OMJJ).
    Regards,

  • Error message while syncing contacts with windows address book

    getting error message while syncing contacts from windows address book cradsstring something

    Hello,
    The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty. i have read about bug like this which was resolved with us

  • How do I attach my iSight camera to my Apple Cinema Display?

    I've just bought two iSight cameras, and found nothing in the accessory kit with them that would allow me to attach the camera to my Apple Cinema Display. This is because the back of the Cinema Display is beveled rather than flat, so the flat base of

  • HT3737 How do I close multiple Desktops?

    I have two desktops open and am not sure how to close one of them when finished with it. Tried shuting down and relaunching but this didnt work. Any ideas?

  • Opening A PDF in Desktop View

    How do I open a PDF in the old desktop view?

  • Keynote Aborts during presentation!

    During a presentation last week, Keynote aborted! Not once, but twice. Talk about embarrassing! I was using a Targus Bluetooth remote and sending the video out to a flatscreen TV using non-mirrored mode. After the first abort, the Targus remote would