BORGR. Error when posting Inbound Delivery

Within transaction BORGR, when posting an inbound delivery, the material document is in state "Archived" instead of completed.
This is observed in the document flow of inbound delivery.
Status WBSTK and WBSTA of tables VBUK and VBUP are recorded with " C" even though that the material document does not exist in the system.
This error does not allow to continue with the transport order creation of the received material.
I would like to know the possible reason for this problem and the solution.
Thanks.

In the config of  Define Internal Confirmation Categories 
is
2 shipping notification is assign to 10 or LA if it LA than it will allow you to create the inbound delivery
The delivery is created in my system
i got message
Notified quantity exceeds quantity still to be notified 15.000- CS   Message no. ME160                                               
but it is warning not error.

Similar Messages

  • Error while posting Inbound Delivery

    I am trying to post inbound delivery and getting error that there is no item avaialble on the Purchase order. Please help.
    Thanks in advance.

    Hi,
    Check Confirmation Control Key of resp. purchase order.
    Also check for the said inbound delivery, have you created shipment for this?
    If no, create with respect to Inbound delivery using transaction VT01N and then do GR agianst Inbound delivery.
    Please check and revert.
    Thanks
    Hrishi
    Edited by: Hrishi on May 30, 2011 10:53 AM

  • Error when creating inbound delivery - insufficient quantity

    Hello all,
    after creating a purchasing scheduling agreement (ME31L), I want to create an inbound delivery (VL31N).
    But when saving the inbound delivery, I get the following error message:
    Insuff stk qty (       0.000) for line item000001
    The stock for the material on the scheduling agreement is empty. But why does it not let me do an inbound delivery?
    Thanks
    Anne

    In the config of  Define Internal Confirmation Categories 
    is
    2 shipping notification is assign to 10 or LA if it LA than it will allow you to create the inbound delivery
    The delivery is created in my system
    i got message
    Notified quantity exceeds quantity still to be notified 15.000- CS   Message no. ME160                                               
    but it is warning not error.

  • Error when posting the Delivery

    Hello Everybody,
    When I am trying to PGI the delivery, I see the following error -
    "Posting only possible in periods 2008/11 and 2008/10 in company code SCIL"
    When I tried to close the posting period in MMPV, I see this error.
    "Incorrect period in control rec. of CoCd SCIL; no conversion
    The current period (month/year) of the control record is112008"
    My company code Variant is M4.
    Can someone tell me where am I going wrong.
    Thanks,
    Sneha.

    Hi
    Menu path to t code OB52
    img-financial accounting new-financial accounting global settings (new)--ledgers-fiscal year and posting periods-posting periods-open and close posting periods(OB52)
    First of all you must see what the posting period varient maintained for your company code SCIL
    This you can see in OBY6 (in processing parameters tab you can see that) and what the fiscal year varient maintained in your company code SCIL in t code OBY6
    In that take your fiscal year varient say K4
    In that take your posting period varient say 1000
    Then in OB52 you have to maintain like this
    1000--S-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--A-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--+-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--D-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--K-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--M-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    1000--V-blank---zzzzzzzzzz--01-2009-12-2009---13-201016---2010
    If you maintain entries like this your error will be resolved
    There are many more opinions available regarding OB52
    Please make a search
    If it is real time issue please take the opinion of your FI person
    Regards
    Raja

  • Error When Posting Returns Delivery

    Hello Everyone,
    I am encountering an error in SAP whenever I am trying to post a returns delivery - "Value of Goods Movement is Negative".
    I checked OMJJ and negative posting for 122 is allowed. Is there an explanation for this? How can I compute the value of the 122 and where is it coming from?
    Other details
    1. The material I try to return's PO price is 482.81 per 1000 kg.
    2. I post GR with quantity 35, 710 kg with value USD 17, 241.15 on 1/15/2010
    3. Invoiced on 1/19/2010 wuth 35,710 kg with value USD 16, 896.33
    Thanks in advance!

    Hello Antony,
    I already checked that OSS note. Based from Case C of this (which I think is similar to the scenario I mentioned), the value of the goods movement 122 if I return 1000 Kg of this material is USD  463.68 since according to the note, the value can be computed like this
       (net value in invoice * qty to return) - discount
    discount is 2% from price...
    however, I am still encountering the error message. Can someone please explain how to get the movement value and how did SAP identified my returns delivery to be negative?
    Thanks in advance!

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Error while creating inbound delivery

    Hi All,
    I get an error while creating inbound delivery from ASN
    "Error during conversion of unit of measure: UoM is missing -> ST BOR131
    Please help solve this issue.
    Thanks in advance
    Regards,
    Thiru

    hi,
    please maintain the uom  for tour material.
    or
    reffer this link
    Alternate Unit of Measure Conversion Rule Error
    /thread/2000551 [original link is broken]
    Thanking you.

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error when posting goods issue

    hi gurus,
    can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
    thanks in advance

    Dear Ysabella
    It seems the item texts is not maintained in the order which is made as mandatory.
    Go to sale order VA02, select that line item and click on "GotoItemTexts".  There maintain the relevant text and retry.
    thanks
    G. Lakshmipathi

  • Error when posting IDoc *** in system ERP100

    Hi Experts!
    Can you pls help me with a goods receipt issue?
    When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
    The same msg is getting displayed in RZ20.
    On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
    What can be the reason for this problem please?
    What is in general the way to analyse and solve this kind of issue?
    Thanks a lot !!
    imre

    Hi,
    First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of  BBP_DOCUMENT_TAB.
    Hope this helps.
    Regards,
    Kalyan

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • Error when posting to profitabilty segments

    Dear All
    I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
    Data record already exists
    Message no. KE581
    Diagnosis
    This error should not occur.
    Procedure
    Contact your system administrator or SAP directly (component CO-PA-ACT).
    Has anyone come across this issue... ? Pls let me know how to resolve this?
    Thanks
    Gayani

    Hi,
    Please implement the latest version of the note 1321225 into your system in order to solve this problem!
    Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
    Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
    Afterwards the described problem with error message KE581 should be solved.
    regards
    Waman

  • HU not coming when create inbound delivery via outbound delivery using SPED

    Hi experts,
    In my synario  :::issue : Handling units from  outbound delivery are not transferred to  the automatic created inbound    delivery using SPED output type.
    Error when HU is assigned manually     ::Handling unit 10000013565 is already assigned to outbound delivery 87005777.
    Can somebody solve my probeleam or is there any sap note availavle to solve this probleam.I am using ecc 6.0 environment.
    Thanks
    subhasis

    We have the same issue. Please post the resolution. Thanks.

  • Error while activating Inbound Delivery Notification

    Hi,
    I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
    However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
    For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
    What's missing?
    I help will be rewarded.
    Thanks,
    Amit

    Thanks Virendra,
    You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
    In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
    In EWM system - I had assigned the number range in following place:
    Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
    In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
    Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit  along with the number transferred from ERP system. Hence it was giving error.
    As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
    It created Inbound Delivery successfully.
    Thanks all of you for helping on it.
    Cheers,
    Amit

  • Error while posting return delivery to backend system

    Hi All,
    We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
    Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
    Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
    Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
    Thanks
    Siddarth

    Hi Siddarth,
    Please implement the note below, which is included in SP05.
    2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
    Regards,
    Wendy

Maybe you are looking for