Boris Title 3-D problem

When I attempt to create a title in Boris Title 3-D, FCP suddenly quits. Then that file will not reopen (I see it briefly and then it crashes again). It does not quit when I use other text options. Do you have any suggestions on fixing this problem?

What Mr. Wolsky says, also:
Boris released and update to fix some of these problems:
!http://www.spotsbeforeyoureyes.com/Boris.jpg!
You can download the update free at
http://www.borisfx.com/news/labels/Boris-Calligraphy.php
Message was edited by: Meg The Dog to fix typo

Similar Messages

  • Perplexing Problem with Boris Title Crawl

    This has been an ongoing problem that occurs whenever I use Boris Title Crawl to create very simple titles (i.e lower third, scolling titles, etc). Within the HD sequence, the titles work as intended, but when I down convert the sequence or export the sequence containing the titles to a QT file (whether via QT conversion or compressor) this is where I get the problems. Titles which were once centered become right justified or visa versa. It doesn't occur with all of the titles and there seems to be no recognizable pattern. Sometimes the title will flip back and forth between centered and justified. Sometimes I go back into the sequence and re-edit the title. This may solve it, but then another title will be effected. This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.

    *This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
    Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
    rh

  • Problems with Boris Title 3D (Imbedded Software in Final Cut Express 2.0)

    Thanks for all your help on my previous problem...I have run into another though.
    As I mentioned before, I recently upgrade to OS X Tiger. I am running FInal Cut Express 2.0, as my editing software. (The following problem was not an issue before I upgraded.) Whenever I try to edit or creat on Title 3D graphic, which used the Boris Title 3D software, the software opens, but the editor does not, and therefore I cannot edit or create any graphics using this software.
    If you have any ideas on a solution, please let me know!

    No longer have FCE 2.0

  • Boris Title roll problem!!!!

    Ja have the 1080i 50 8 bit sequence. I try to put the boris title roll on the timeline. Rolling title looks like the interlace problem. I've tried the video filters such as de interlace, shift fields, flicker filter.I;ve changed the sequence setting many times trying set the field dominace but ...No effect.... Strange for me that rolling title looks better on the video client monitor, but only using composite analog output. On the HD SDI output problem still exist. I have that problem foe a long time... It's frustrating .... Please help...

    I.ve checked that exactly the same problem I have using motion to create title roll sequence. Putted on the timeline seemes to field dominance problem....

  • Can't import .RTF into Boris Title Crawl without crashing

    I laid out my titles in Word, saved as an .RTF and then when I clicked import in Boris Title Generator (crawl) and selected the .RTF file, FCP crashes.
    I tried opening a new empty project and doing the title there - same problem.
    I tried cutting my .RTF into two parts. Same problem.
    I've spent hours tonight first trying to layout in columns and better spacing in Boris (leading command made the lines crazy after render), so finally thought to import but is crashing.
    Any help very much appreciated.

    What format are you working in? If it's DV, simply create a new file in photoshop using the DV preset and then adjust the vertical dimension to whatever is appropriate. Post back if you want, and I'll look at some of the crawls I've done and see what they're dimensions are.
    If you want to send me your email address (my email is in my profile) I'll try and put together a small project with a end crawl or two from some recent projects, along with the photoshop files.
    The trick is to create a separate sequence for the end crawl with the field dominance set to none. You animate the title crawl in this sequence and then render out a selfcontained qt and bring it in to your complete sequence.

  • Creating Gutter with Boris Title Crawl

    Hello all!
    I'm doing the end credits for a DV project and as we all know Boris is better than Final Cut's text generators. Just wondering if there's a feature in Boris a la the * in FCP's Scrolling Text generator. You know, to line up those gaps. I've fidgeted and can't find it.
    Michael

    *This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
    Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
    rh

  • Boris title crawl missing after converting with Compressor

    Not sure where to put this, since it involves two applications, FCP and Compressor.
    I have my credits done as a Boris title crawl (roll). They roll up just like credits in the average movie. They're quite long, spanning almost 4 minutes. Some videos are also included in the open space during this title crawl.
    When I convert the files for use with DVD Studio, I used the DVD Best quality 90 minutes presets. It performed that conversion without a hitch.
    Looking at the video, everything looks great (it's interlaced, of course). No apparent problems, until the end, where the credits should be scrolling: there's nothing. The videos show up, but only one small section of the credits actually show, and it's cut-off.
    I checked the credits again in FCP, and they all fit 100% within the inner title-safe overlays. I've never had any trouble with these rolling credits, except for this problem now.
    Any ideas what could cause them to almost completely disappear? most of the time the screen is pure black with absolutely NO text whatsoever. Only three lines show up, and they are cut off on both sides (they extend beyond the view of the screen on both the right and the left).
    Many thanks to whoever can assist me.

    So you're saying I should just export one as a test? Or, what I was thinking is, export the title crawl as a self-contained movie, then import it back into FCP and then send it to Compressor; can't mess it up like it does if it's a strait-up video, right?
    Still can't figure out why Compressor would mess it up like that though. Looks perfect when I export the whole movie as a self-contained movie, which I already did twice. I then burned a sample DVD Using iDVD as a test to see how my video looked on the TV screen. Everything was perfect, except a small amount of flickering in some text (but it wasn't enough to bother me).
    Yet, sending it to Compressor completely destroys the title crawl, leaving the intermixed videos untouched. Just plain weird...

  • Boris Title - Missing Text After Render

    All apologies if this is an ages old bug that everyone worked to fix years ago. I was a daily editor from FCP 1.0 until 2004 or so when a project caused me to walk away from cuts and edits and crashes all together. Like a masochist, I've jumped back in, but without the prior security that came with daily readings of all the proper forums. I've tried to do my due diligence (5 hours here, 2-pop, Cow, etc) but to no avail. So....
    FCP 4.5/OS X 10.4.9
    Previews of text when using Boris Title Crawl to create a crawl look fine, but after rendering, the beginning and end of each text string, no matter how long, are missing.
    So the above sentence would read:
    ext when using Boris Title Crawl to create a crawl look fine, but after rendering, the beginning and end of each text string a
    Scrolls are no problem. Only a problem with crawls.
    Again. Sorry if this has already been settled and I'm just overlooking the thread.
    Dual 1.42 GHz G4   Mac OS X (10.4.9)  

    Welcome (back) to the forum.
    Have you tried...
    Deleting all renders in Render Manager, then re-rendering?
    using the crawl in a different sequence or project?
    trashing preferences?
    I'm unable to duplicate the behavior. Seems to work fine here, with that sentence.
    How are you previewing?
    Do you have improperly set 'Margins' in the 'page' tab of Boris...or any crops set in 'Motion' tab of FCP?
    Post back,
    K
    EDIT - BTW, FCP4.5 works best with OS 10.3.9/QT6.5.2

  • Boris title 3d

    Hello, I got a sequence with subtitles made with Boris title 3D and FCP HD. After upgrading my system to FCP studio 5.1 I am not able to open this sequence anymore. It crashes on the Boris plug in. Are the two Boris title 3D versions not compatible?
    Any ideas?
    Thanks,
    Rob.

    Has anyone bothered to search for an answer?
    A quick search for BORIS 3D yielded more than 100
    hits n about forty-five threads. Many possible
    causes, many different symptoms.
    The results were not encouraging because the OPs
    rarely came back to close the threads and we just
    hate that around here.
    Time for you guys to start sifting through the posts
    for situations in the threads that resemble your
    individual situations.
    bogiesan
    I also spend a lot of time going through threads to make sure my problem has not been answered before, I really do hate to waste peoples time.
    Michael,
    thanks for your reply, i will try and find a program for corrupt fonts and post my findings.
    Cheers.

  • Boris Title 3d after export....

    ...looks squeezed and distorted - even to the point that it gets clipped at the top and bottom of the frames on the frames that have a bunch of text.
    All updated software, late 2007 MP, sequence is HDV 1080p, 23.98, no field dominance, and I am trying to export the sequence using compressor and the iPhone VGA preset.
    This sequence and workflow is the same as several other sequences that I have exported in the past, just different content - but otherwise the settings are all identical and even the titles that are being distorted are simply copies from other sequences that have worked in the past. This is really like one of those "all of a sudden" things.
    This is driving me nuts because everything else in the exported quicktime looks great (images, HDV video, imported Motion graphics), but just those Boris 3D titles are squeezing and distorting - and they've never done that before. I read in one thread about someone mentioning that the Boris titles are using square pixels -- true, but still this has never been an issue upon export in the past. Anyone have any ideas - I'm under a mild deadline and this is making me look like a moron - usually not that hard to do though, I admit. Thanks in advance.

    I've been having this same problem for years. Exporting a timeline, from FCP version 5 and higher, using compressor to create quicktimes always squeezes/distorts titles created with boris. If I use quicktime conversion in FCP, the titles look fine, so it seems like it must be a compressor issue. I will try exporting a stand alone quicktime then re-importing that into compressor to see if that works. For big batches, it's not really efficient to export a bunch of fullres qt's only to then re-import them into compressor to output web qt's. I'm using fcp 6.0.5 with osX 10.4.11 on a mac pro quad core. Does anyone else have insight into this?

  • Boris Title Crawl

    Hi all,
    did some looking around and couldn't find anything this specific.
    I am able to get the "Text window" when using the Boris Title 3D. But when I go to use the Boris Title Crawl and click on the "banner" for the Text window, nothing happens. I do get a new menu for Title Crawl but no real working options. I am not able to use it at all.
    Has anyone else seen this problem?
    Thanks!
    --Tim

    Could it be a corrupt font?
    To validate fonts:
    Open Font Book and select one or more installed fonts to check.
    Choose File > Validate Font.
    In the Font Validation window, review the fonts listed for warnings or errors. Use the pop-up menu to display warnings and errors separately, if necessary.
    For fonts with warnings or errors, click the disclosure triangle next to the font to see which validation rules show errors.
    To remove a corrupted font, click the checkbox next to the font. Make sure fonts you want to keep are not checked. Then click the Remove Checked button.
    Dual 1Ghz G4 Quicksilver   Mac OS X (10.4.7)  

  • Boris Title 3D freezing?

    Greetings
    Sometimes when I open up Boris Title 3D to copy the text box and put it into a word document,
    it freezes on me.
    Any suggestions?
    Thanks!

    Have you updated Boris Title 3D to the latest version (2.2)?
    Boris Title 3D is actually Boris Calligraphy, if you need to update go to
    www.borisfx.com
    and click on Support > Updates > Calligraphy
    You will need to register on the site to download.
    This fixed a problem Boris Title 3D had with some Microsoft Office installed fonts.
    MtD

  • Boris Title 3D Crashes FCP

    New Mac Pro, new Final Cut Studio. Did all the updates from Apple. Mac OS X 10.5.4.
    When I try to use Boris Title 3D over any piece of video it shuts FCP down.
    I can open Boris, I can type, change settings, etc. When I try to put it on the timeline with video, FCP shuts down.
    Any suggestions?

    Ding Ding! We have a winner. Over the weekend I was mulling the problem over and realized I had downloaded and installed a couple fonts the day before. Deleted them this morning and it works now. When I went into Suitcase to delete them, they showed as "Missing".
    Thanks, Michael. Points for ya.
    Jonathan

  • Boris Title 3D Loads extremely slowly

    My Boris Title 3D plug takes about 20 seconds to load...literally.
    I'm running FCP 5.1.4 on a Quad G5 with 3GB RAM. I haven't seen this behavior on other computers. Is anyone else having this problem, and do you know of a solution?
    Thanks.
    Macbook Pro 17", Powermac Quad   Mac OS X (10.4.7)   Kona LHe, (4) 1TB G-RAID Drives

    I wonder if you have a large number of fonts or a corrupt font. You might try removing fonts from your system and see if that helps.
    Also, try deleting fcp preferences.

  • Getting Smooth Text with Boris Title Crawl (Scroll)

    Hi, using FCP 5 (Studio) with Boris Title Crawl generator.
    It seems to work pretty well, does what it should, renders relatively fast, all that. The only problem is the upward scrolling motion is a little jumpy. Just wondering what things I should be tweaking or some general strategy for getting a smooth text scroll.
    The timeline is 10-Bit uncompressed NTSC so there aren't DV text issues here (or so I'd think). I'm trying different fonts, bold and sans-serif. It looks OK, but not broadcast (DVD actually) ready.
    Thanks everybody, much appreciated.
    Jason

    Thanks Jim, makes sense.
    To adjust speed, do you mean basically slightly change the length of the clip? I don't see any other place to alter that.
    Thanks,
    Jason

Maybe you are looking for