Boris Window Stuck on Non-Existant Monitor

Hello everyone.
I edit using my MBP at school, hooked up to a 23" Cinema display. I shuffle windows around to either screen depending on what I'm working on at the moment. Yesterday I was working with Boris on the external monitor. I closed Boris, saved, quit and went home for the day. When I open up FCP today, none of my windows are up, of course, because they defaulted to the external monitor which was no longer plugged in. So I go up to window, arrange, Two Up, and everything is back to normal. When I go to edit my Boris text however, the edit window doesn't show up, I'm assuming its stuck on the other monitor. How do I get it back on my laptop's screen without plugging in an external monitor?
If it matters, I'm running FCS 3 on a 2.8GHz MBP with Snow Leopard v.10.6.2.

Hi -
This happened once to me and the only solution I could come up with was to borrow a second monitor, and drag the window back to the main screen.
I tried deleting the Boris prefs, but if I remember correctly, this did not help.
MTD

Similar Messages

Window appears on non-existing monitor.

Hey now...
For awhile, I had a second monitor ( An analog flat panel) hooked up and used both during my FCP edit sessions.
When I wanted to add text, I would use Boris Title 3D and "Click for Options" as would any one.
My "Options" window would open on my second monitor. (The one on my left side )
Now that I have removed it ( bad monitor ) and now when I select OPTIONS, it still bounces to where the old monitor is.
I know this because when I Expose' all the current windows, it comes flying in from the far left - off screen. If select it using Expose', it becomes active and I can type on it, but out there in limbo.
It's like a phantom leg. It feels like it's there, but it's not.
Any I deas how I can GRAB the title bar and drag it back onto the ONLY active monitor?

dumb question maybe, but have you rebooted since you detatched the second monitor? the system may still think you have two monitors attached ... you didn't leave a vga adapter or some such plugged in?
in OS X > System Preferences > Displays, tick the "Show displays in menu bar" checkbox.
then look under the Displays menu bar item at the right of your menu bar and see if it is displaying details for 1 or 2 monitors
if its displaying settings for 2 monitors then the system still thinks the monitor is there, despite your having unplugged it ... in that case, detatch any display adapters and/or check your connectors
hope it helps
Andy

PSE 12.0 Organizer window stuck when on second monitor.

On a mutiple monitor machine aranged to side by side, and the second monitor is larger than the primary monitor, I cant drag the browser window to second monitor up above where the window was on the primary monitor. I can rezize the window to fit and maximize it as a work around, but must be a bug on my 2.6 Ghz i7 Mac Book Pro with second monitor and OS 10.8.5. I dont have this problem with Bridge CC.

Ok for the « normal » trial message, allthough …
A couple of thoughts :
- I waited 12 to 18 hours to finish generating the thumbnails.
- All the auto-analyzer and automatic people recognition are disabled
- I’ve discovered in “pse-conversion-log_Photos.txt” 4 messages : “logic_error, unable to reorder version set” with versions stacks. So, I’ve suppressed the 4 photos concerned (poison files ?) in the versions stacks of PSE 4.0 and I will convert my catalog another time.
- With every crash, a file log is generated, that I send to Adobe, as asked. I attach to this message file "Adobe8 crash1.doc" which contains a copy of the message display Adobe and content of the file generated after 6 hours 30 of thumbnails generation.
Thank you again for your interest in my problem.

DFSR Backlog Stuck on Non-Existent Folders

I have two 2008r2 servers setup in a full-mesh multipurpose replication group. (01 and 02). 01 was the source server. The initial sync just finished last night and there are 2 folders that do not appear on either server but they are stuck in the backlog of
changes being pushed from 02 to 01. The backlog from 01 to 02 is clear and is replicating perfectly.
I've attempted rebooting 02, this did nothing.
The Event viewer for both servers contains nothing helpful.
I've attempted creating and deleting the "batman" folder hoping that would clear it out. It didn't. When I created it on 01 it pushed it to 02. When I created it on 02 it created a redundant entry on the backlog.
There were some other random files stuck in the backlog. They were unnecessary so I just deleted them from 01 and it cleared them from the backlog. I was hoping to just do the same with the folders...
http://i.stack.imgur.com/ji41m.png
Is there somewhere else I can look to help find why those folders are stuck?
Edit:
I also found this from the DFSR debug log (This occurred while the initial sync was finishing up last night).
20140513 23:27:39.254 2372 CSMG 6769 ContentSetManager::Initialize csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB} csName:Art rootPath:E:\Art state:InitialSync(Sync) ptr:0000000000F83D50
20140513 23:27:39.254 2372 CSMG 5547 ContentSetManager::CheckContentSetState Updating content set record csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB} csName:Art ghosted:0 readOnly:0 readOnlySince:16010101 00:00:00.000
20140513 23:27:39.254 2372 CSMG 5590 ContentSetManager::CheckContentSetState Content set csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB} state:InitialSync(Cleanup)
20140513 23:27:39.395 2372 STAG 2594 Staging::ScanStagingDirectory Staging space usage is: 285794033664
20140513 23:27:39.395 2372 CSMG 2960 ContentSetManager::StartInitialSyncCleanup csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB}
20140513 23:27:39.395 448 ISYN 153 InitialSyncCleanupTask::Run csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB}
20140513 23:27:45.760 448 ISYN 453 InitialSyncCleanupTask::MoveOut Moving \\.\E:\Art\Artist Files\Christine\batman to pre-existing:0x9000000156B80 csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB}
20140513 23:27:45.776 448 CSMG 547 ContentSetManager::DeleteChildren LDB Updating ID Record:
+ fid 0x1000000001DF2
+ usn 0x0
+ uidVisible 0
+ filtered 0
+ journalWrapped 0
+ slowRecoverCheck 0
+ pendingTombstone 1
+ internalUpdate 0
+ dirtyShutdownMismatch 0
+ meetInstallUpdate 0
+ meetReanimated 0
+ recUpdateTime 20140505 11:56:12.179 GMT
+ present 1
+ nameConflict 0
+ attributes 0x10
+ ghostedHeader 0
+ data 0
+ gvsn {BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
+ uid {BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
+ parent {29CFABC2-0180-41C7-A9CE-21DD92783892}-v6880183
+ fence Initial Sync (1)
+ clockDecrementedInDirtyShutdown 0
+ clock 20140501 00:01:02.367 GMT (0x1cf64d070b1522c)
+ createTime 20140124 09:37:42.441 GMT
+ csId {2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB}
+ hash 00000000-00000000-00000000-00000000
+ similarity 00000000-00000000-00000000-00000000
+ name batman
+
20140513 23:27:45.776 448 LDBX 4435 Ldb::InsertWalkerJob Inserting dirWalkerJob:uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133 moveType:MoveOut (2) at time:20140514 03:27:45.776
20140513 23:27:45.807 448 DIRW 647 DirWalkerTask::QueueMoveoutJob Queueing move-out uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133 fid:0x1000000001DF2
20140513 23:27:45.807 2372 DIRW 317 DirWalkerTask::Run Start walking directory.
20140513 23:27:45.807 2372 DIRW 1373 DirWalkerTask::MoveoutStep Starting to process move-out job. uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
20140513 23:27:45.807 2372 DIRW 1398 DirWalkerTask::MoveoutStep Iterating children of uid: {BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
20140513 23:27:45.807 2372 DIRW 2764 DirWalkerTask::TombstoneOrDelete LDB Updating ID Record:
+ fid 0x1000000001DF2
+ usn 0x0
+ uidVisible 0
+ filtered 0
+ journalWrapped 0
+ slowRecoverCheck 0
+ pendingTombstone 0
+ internalUpdate 0
+ dirtyShutdownMismatch 0
+ meetInstallUpdate 0
+ meetReanimated 0
+ recUpdateTime 20140505 11:56:12.179 GMT
+ present 0
+ nameConflict 1
+ attributes 0x10
+ ghostedHeader 0
+ data 0
+ gvsn {BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1376267
+ uid {BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
+ parent {29CFABC2-0180-41C7-A9CE-21DD92783892}-v6880183
+ fence Default (3)
+ clockDecrementedInDirtyShutdown 0
+ clock 20140514 03:27:45.776 GMT (0x1cf6f247911f746)
+ createTime 20140124 09:37:42.441 GMT
+ csId {2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB}
+ hash 00000000-00000000-00000000-00000000
+ similarity 00000000-00000000-00000000-00000000
+ name batman
+
20140513 23:27:45.807 2372 DIRW 101 DirWalkerTask::Job::Finish MoveOut csId:{2D9CF1D7-50E2-4B3E-AC6B-3D60C6B026EB} uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
20140513 23:27:45.807 2372 DIRW 893 DirWalkerTask::RemoveJob Removing job type:2 uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
20140513 23:27:45.807 2372 LDBX 4472 Ldb::DeleteWalkerJob Deleting dirWalkerJob. uid:{BE36C74B-B5FC-4E8A-8735-039CF9FB3982}-v1264133
20140513 23:27:45.807 2372 DIRW 364 DirWalkerTask::Run Exit.

Hi,
From the log, it is trying to move E:\Art\Artist Files\Christine\batman to pre-existing folder, which means your Server01 is the primary server and the folder exists on server02 before setup the initial replication (and it does not exist on server01).
Could you find the folder in pre-existing folder on server02? It is a hidden folder.
If issue still exists, try to set your server01 as Primary again to see if replication could be re-performed to get it fixed:
Dfsradmin Membership Set /RGName:<RG Name> /RFName:<RF Name> /MemName:<Member Name> /IsPrimary:True
If you have any feedback on our support, please send to [email protected]

Windows gets rearranged in Windows 8.1 and secondary monitor when computer goes to sleep

I have a MacBook Air 2013 with a secondary monitor installed through a mini-display port-HDMI cable. I also have bootcamp installed in Windows 8.1 64 bits with all the latest drivers installed. The problem that I have is that when the computer wakes after it goes to sleep, all the windows in the non-primary monitor moves to the primary monitor and I have to re-arranged them all over every time.
What I tried so far:
1. Installed the latests drivers from Microsoft and Intel HD Graphics 5000.
2. Look for the DMMEnableDDCPolling in the registry. (not found only available for ATI cards)
3. Change the mini-displayport-HDMI cable for a new one that doesn't transmit the "power" so that computer do not detect that the monitor was shutdown.
4. Change the resolution on boths monitors to native resolution
5. Change the primary display from external monitor to laptop monitor
6. Changer HKLM\Software\Microsoft\TMM\UseIViewHelper from 1 to 0
7. Try to get an answer from Apple, Intel and microsoft support.
Similar threads where I found this info:
Link 1
Link 2
Link 3
PLEASE HELP! I Don't know what else to do!
This do not happend on MacOS, is happends only in Windows.
Thanks, Andres Rormoser.

The only solution that I found so far was to install Actual Window Manager, separate the secondary monitor in tiles, assign each window to each tile, add a shortcut to start/stop ActualWindowManager and every time the computer wakes up with the windows re-arranged I press the shoutcut and everything goes back to my predifined layout.
http://www.actualtools.com/?ref=aim814_prg

Icloud stucked on verifying of non-existing account

HI
I am pretty amazed how can icloud be stucked like this.
My nephew, 16 years girl, by mistake have entered wrong non-existing
email adress for icloud-apple id.
instead ......@gmail, she entered [email protected]
ANd icloud some how have accepted and start to ask all the time
PAssword and verifying account with pop up window on every 3 second, not letimg you
TO work anything else and so annoying.
WE have try to erase account in icloud settings, but find my iphone was already on
and was keep asking password for not existing and not verifyed account.
For the story, to be more stucked, we have made Erase all settings and data, but after initial
start up screen have stucked on asking user and password for non existing account.
I really dont know how to solve this problem, please help me....

Sounds like 3 issues you have
1)You do not want users to check content into accounts which they have named? Can you use only predefined accounts and turn the accounts field into being a select not select and edit?
2)Account permissions are hierarchical so if you have RWD to account 'documents' then you will have at least those permissions in documents/tim documents/sam documents/<whatever>. Also do you have permissions assigned to 'all accounts'
3)You do not like the way that accounts performs its hierarchy calculation based on substringing. Too bad I think that is just the way it works. best practice would dictate that root accounts and permissions are not assigned to very commonly occurring patterns unless you want the permission inheritance.

Extra monitor w/laptop in office, when out of office how do I prevent Firefox from displaying on the non-existant 2nd screen?

When I am out of my office using my laptop, upon launching Firefox, it displays all of the tabs from the previous session on the non-existent extra monitor which is set up as a screen extention for when I am in my office. All of the other programs that I park on the extra monitor (Outlook for example) display on the laptop's screen when the extra monitor is not attached. Is this a bug? Or, must I not save my open tabs when exiting Firefox if I am going to use the laptop w/o the monitor?

Thanks for your suggestion. I sort of came to that conclusion as I was typing the original question. However if there is anyone out there who has a solution that is not dependent on my remembering to do something before I exit Firefox, it will be welcomed.

LV 8.20 crashes on opening non-existent window

With LV 8.20 and Mac OS X 10.4.8
Open LV, and by default it opens a blank window.
(preferences
IsFirstLaunch: False
showNoNavDialog: True
skipNavigatorDialog: True
Close the blank window titled "Untitled 1 Front Panel" using the "close button"
Note that in the Window menu, "Untitled 1 Front Panel" and "Untitled 1 Block Diagram" both still exist.
Select "Untitled 1 Front Panel" in the window menu.
LV will crash as it tries to display a non-existent window
Crash at VirtualInstrument.cpp 2345
Reported to NI SRQ 7137659

Just to update, CAR #43RAJ3C5 has been issued for this.

Non existing local user managed to RDP to windows 2012 target machine

Hi,
It seems the exact same issue as I see it here: http://social.technet.microsoft.com/Forums/en-US/91f09a4b-350f-47f8-814b-53b29d1a6306/windows-2012-rdp-login-credentials-are-not-used-on-remoteapp-connect-dialog-box?forum=winserverTS
But I couldn't see any real/final answer.
Can I get official response from MS about this issue?
When we use the RDWeb, we use a non existing user to connect to some target 2012 machine and it actually works... it connects me to the target.
How cab I eliminate it?
Tx,
shlom

Hi,
Thank you for posting in Windows Server Forum.
For the user which you don’t want to provide the access of Remote Desktop to target machine, you can apply GPO setting for that user. Need to apply “Deny logon through Remote Desktop Service” GPO policy and add that user under that policy. You can
find the policy under below mention path.
Windows Settings/Security Settings/Local Policies/User Rights Assignments
Hope it helps!
Thanks.
Dharmesh Solanki

1and1 Webmail signing out only on this computer, won't sync, blocking non-existant pop-ups & windows

My webmail is auto signing me out several times a day, but only on this computer. It's set for 'private', I've uninstalled and reinstalled that program, cleared cache and re-started, same thing with Firefox.
Firefox is also frequently blocking pages from opening that apparently don't exist, and blocking non-existent pop-up windows as well.
Today I got an error message that my sync password was rejected, which is odd since it's set to manually sync and nothing's been changed. All the resets happened days ago. It also wouldn't let me use my password, but let me change it.
Since this is the only computer I'm having the problems on I'm assuming that it's either the version of Firefox that I'm using or something in my computer that suddenly isn't playing nice with Firefox, but I don't know where to start, other than once again un and re-installing it (which did nothing).
Thanks for any help!

I kept getting that error message. I thought that since I'm syncing with my corporate email so the calendar syns wirelessly with Outlook, that it was causing a conflict.
I just found this post though, and other people said it worked for them
http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=0267f2909cea0df9&hl=en
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

HT204088 I need to stop a double download/purchase of Sons of Anarchy Series 2... HELP! no one to call, email support non existent... stuck at airport with 2 downlaods happening

I need to stop a double download/purchase of Sons of Anarchy Series 2... HELP! no one to call, email support non existent... stuck at airport with 2 downlaods happening

Contact iTunes support:
http://www.apple.com/support/itunes/contact/
They usually respond within 24 hours.

Adobe ID has old non-existent email, stuck as can't verify.

I screwed up. Installing CS 5.5 on second mac, and didn't update my email address before installing, so the verification email went to a non-existent address. The "We have sent an email to (old address)..." page blocks any attempt to access my ID to update it. Going to "chat" with Adobe seems to get no response; waited 18 hours for a representative who will get to me shortly. I created a new Adobe ID with the updated address in order to access this forum. Any advice would be much appreciated.

Prayjam you will need to contact our support team directly to resolve the Adobe ID issues you are facing. If you are not being given an option to contact our support team at Contact Customer Care then please utilize a different web browser.

Non existent plug ins

Just bought a new 24" iMac which came with iMovie 08 which I didn't like, so I deleted it and installed iMovie HD from my original install disks. Now when I start iMovie HD I get a whole string of error messages which say "something is wrong with the plug in xxx" the first one is 3D color rotate, but when I hit enter I get another for a different plug in and so on for a total of about 50 plug ins. Eventually I can use iMovie ok but its a real pain having to hold the enter key for so long every time I start.
Does anyone know how I can stop iMovie trying to access these non existent plug ins?
thanks
Steve B

SPDB wrote:
Josh
personal opinion only, but why would you want to keep iMovie 08?
As a user of both in concert, I can answer from my perspective. First of all I don't have the innate dislike of iMovie '08 that others do and having never used either version before, I found '08 different but not too hard to master. I would be just as happy using only '08 but I can't because I absolutely must have the ability to define dynamic chapter markers in a full-length movie (something that the Garage Band work-around can't do).
To address the question as to why keep the '08 version, there are a few features that I like better. There are transitions and titles that are either new or improved over those in iMHD6 and the ability to use them is nice. Granted it's a pain to edit the movie in '08, export to a .m4v then open in iMHD6 to split it up and add chapter markers, then share with iDVD, but until someone wants to give me back dynamic chapter marking, or the ability to use iM'08 effects in 'HD6 I'm kinda stuck. That said I will use a good feature wherever I find it, there are some very nice effects in <gasp> Windows Movie Maker </gasp> that are not available in iMovie. I have a virtual machine running XP on my iMac and I'm not afraid to use it and import the result.
Sacr1lege.

Displayport to DVI Adapter finds Generic Non-PNP Monitor

I have a 6 week old H8-1420T Envy C1U69AV#ABA, Windows 8 64bit, 1GB Radeon HD7670 and I am trying to connect two Dell 1905FP monitors. Each monitor works fine when connected to the DVI port. When I connect one monitor using a HP displayport to DVI dongle adapter, the system reports it as a Generic Non-PNP Monitor and the screen remains black. I tried the adapter on another system and it works fine.
I updated to the new "8.982.10.1800 Rev. A 3 Jan 2013" driver on the HP site but it didn't help. The AMD drivers will not install because apparently this is an ugly step-child video card, not a real AMD. If I knew that I wouldn't have purchased it with the system.
I have the original CD from the 1905FP when I bought them and it doesn't have a driver file on it (didn't need one with XP). When the monitors work, they are each reported as a 1905FP.
Anyone have any suggestions?
This question was solved.
View Solution.

You can make sure you have the newest AMD drivers by using these steps. I have not had any issues updating the AMD driver using these steps on custom built and OEM systems.
I will be honest, I'm not certain if the driver will correct the issue but it is worth trying and having the newest driver may not hurt.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Creating a Socket to non-existent host very slow

Why does it take a long time to try to create a Socket to a non-existent host on a Linux machine? On a Windows machine it takes approx. 20 sec., but when I try it on a Linux machine it takes approx. 180 sec.!
Here's the code I'm using (very simple):
import java.io.IOException;
import java.net.Socket;
import java.net.UnknownHostException;
public class SocketCreator {
public static void
main(String[] args) {
long _begin = System.currentTimeMillis();
try {
new Socket("10.10.10.10", 2000);
} catch (UnknownHostException exception) {
exception.printStackTrace();
} catch (IOException exception) {
exception.printStackTrace();
long _end = System.currentTimeMillis();
System.out.println("It took: " + (_end - _begin) + " ms.");
Some additional info:
- Java2 SDK 1.1.x, 1.3.x and 1.4.x
- Windows XP
- Red Hat 7.2, 9

This is really a Linux system-wide problem. If you wanted to fix this in Java, you might even have to resort to JNI to sent yourself a signal and interrupt your system call (the system call is connect()).
Unfortunately, the page give by "man tcp" on Linux is often not kept up-to-date with the many options available in /proc/sys/net/ipv4 .
Also, access to the local LAN will often give a quick "No route to host" message.
To test the long-timeout, you have to access a remote IP that does not exist. For instance, on Linux, if you start two xterms, and on the firxt you enter:
telnet 66.120.89.14
and on that second your enter
netstat -an
You will see something like this line:
tcp 0 1 192.168.5.18:32836 66.120.89.14:23 SYN_SENT
So now you know that the socket is sitting in SYN_SENT.
Now, if you look on a nice, full man page of tcp, like
http://www.die.net/doc/linux/man/man7/tcp.7.html
You will see
tcp_syn_retries
The maximum number of times initial SYNs for an active TCP connection attempt will be retransmitted. This value should not be higher than 255. The default value is 5, which corresponds to approximately 180 seconds.
Back on the second xterm, try:
% cat /proc/sys/net/ipv4/tcp_syn_retries
5
I bet you got five also. You could turn it down to two (decreases time to around 20 seconds).
You could try this as root:
# sysctl -w net.ipv4.tcp_syn_retries=2
or even add this command to your /etc/rc.d/rc.local file

Boris Window Stuck on Non-Existant Monitor

Similar Messages

Maybe you are looking for