BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback.  I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6.  However, when I turned the car off and back on again, the iPhone would not pair automatically.  I had to manually connect the iPhone with the car.  Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device.  So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it.  YMMV

Similar Messages

  • No Battery Charge and Other Problems After OS3 Install - Solution?

    This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
    PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
    SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
    CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
    WHAT I'VE BEEN TOLD BY APPLE:
    1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
    2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
    3) Initial data transfer after email configuration . . . but symptoms continued long after this.
    4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
    5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
    SOLUTION: Turning off "push" on your exchange email account
    1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
    2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
    3) Scroll down and select - Advanced -
    4) Identify and select your Exchange Server account
    5) Select - Fetch -
    6) Leave settings
    Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
    I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
    NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

    Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
    However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
    Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

  • Roaming problems after IOS Upgrade

    We have upgrade our APs 1100 from Firmware 123-2.JA2 to new 123-4.JA.
    We are using wireless with 7920 (firmware 2.0) and CCM (4.1.3 sr1); after the upgrade we have problems with roaming !!

    Have same problem after upgrading to 123-4.JA running 7920.4.0-01-08.
    After upgrading phones to 7920-4.0-01-09 roaming is OK (again)

  • Syncing and music problem after iOS 4.3 update

    Hi there
    I updated to iOS 4.3 and found that my phone would no longer sync to my PC. After doing some research and trying lots of things (e.g. removing and reinstalling iTunes, de and reauthorising computer, forcing iphone to restart) I was having no luck so I did a restore. This didn't work either and just hung for hours, so had no choice but to stop it and then my partner managed to get my iPhone back to life on his Mac.
    My iTunes then recognised it as new and I was able to start rebuilding my library. However, when I sync music to my iPhone now, it won't play - it just flashes up for a second and then crashes out. Only happens on my music - podcasts play fine. Haven't tried video yet. It also flashes up the album artwork but it is all distorted (cut in half with the bottom half at the top and vice versa...weird).
    I tried downloading a song on my iPhone which played fine, until I then synced it with the computer and it got the same error as the others.
    Any ideas?! I'm planning to uninstall iTunes again tonight (being sure to completely remove any trace) and erase all data and settings from the iPhone so I can start completely afresh. It's the only solution I can think of.
    Thanks
    Alan

    I have discovered this is a problem with Windows 7 Updates (probably Service Pack 1) for me - after I installed the updates all my music corrupted again and iTunes started freezing and not backing up. Lo and behold, after formatting my computer again and not installing ANY Windows Updates, the problem was fixed and I've been able to add all my music back.
    Now I'm not sure what to do - I would like to get Windows updated, but I know it's going to break my phone. Am tempted to try a different iPod manager software to see if that helps.
    Where do I get the iTunes patch? (sorry if it's really obvious)

  • Battery Draining and Heating Problem

    Phone is heating up in minutes while gaming after iOS8 update.
    Any solution/method to avoid this?

    Phone is heating up in minutes while gaming after iOS8 update.
    Any solution/method to avoid this?

  • Grantor Managment solutions and BCS problem after technical upgrade.

    Hello every one,
    The current release SAP installation was upgraded to ECC 6.0; this was a technical upgrade and did not replace functionality such as "Former Budgeting" with the new BCS functionality.  SAP developed the Grantor Management solution utilizing BCS.  BCS utilizes a different table structure from the Former Budgeting functionality.  The current tables do not contain the BCS reference points to each other which limits the implementation of Grantor Management in the same instance. There are no plans to upgrade to BCS functionality at this point in time.
    what are my options? How can we work around this issue?
    Regards
    K

    Hi,
    Thanks for the resposnse.
    But when i go through the OSS notes it is provided that there will be performance problem in executing the report.
    How to get it solved?
    Thanks,
    Regards
    M.A

  • Airport Express problems after iOS Upgrade to 4.2

    Hello
    I have been having problems with my Airport Express since I upgraded to iOS 4.2. AirPlay does not work and have streaming delays and sometimes audio not coming out. I have my airport express connected to a Bose 1-2-3 Hifi Systems.
    Any help to solve this!!

    Yes, it's happened to me too, and I'm on 4.3.2. "Slide to Unlock" or "Slide to Answer" locks up the phone when the slider reaches the right side, which is supposed to unlock the phone. No choice but to force reboot.
    It's happened to me twice so far.

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • IPad 2 switched off and not charging after iOS 7.1 update

    iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

    Hello, 92.romil. 
    Thank you for visiting Apple Support Communities.
    I would make sure you are using an Apple branded cable with your iPad.  If you are, the troubleshooting steps in the article below may help.  The steps listed below for the iPhone and iPod still apply to your iPad. 
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Jason H.

  • I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
    It might be something in your backup.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Share and save problem after latest update

    hello,
    i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app  but problem is still  and app doesn't work properly   ) how  can i downgrade to the old version ? Could you fix this problem quickly ?

    i use app which called "aLogcat"
    --------- beginning of /dev/log/main
    I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
    D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    --------- beginning of /dev/log/system
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
    D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

Maybe you are looking for

  • Links not showing in Links palette; InDesign CS3

    Specs: Version CS3 OS: XP Professional Memory: 2gb After running several searches I found an almost identical question in this forum, but an answer was not posted, plus they had an older version. The link text (missing or not) is not showing up in th

  • Layout problem Try to help me

    Hi friends, In my layout i have two repeating frames. RF1 and RF2 RF1 has group by frame. with in RF1 i have RF2. In RF1 i have only one field i.e)Table name : [ source field ](Group by field). In RF2 i have 3 fields Column Name : [column source ] va

  • USB port stopped working as well as in built camera?

    Hey guys I recently bought a USB hub which blew my RAM up- it was obviously faulty. But after replacing that I have found little things it also screwed up. My USB port (the one next to the shift key) doesn't work at all and the one above it only work

  • Stock Quote software??

    I'm looking for stock quote and charting software to follow the stock markets, do you know any of them? Thanks

  • How do i raise the volume on my mac watching a movie while on FaceTime?

    When im on facetime with my brother sometimes we watch movies together because he's far away so we like to keep in touch with watching movies. Now when we facetime and watch a movie, my mac just turns every other sound volume lower and facetime highe