Bose docking station no longer works with software update

Has anyone figured out how to get their iPod to play music through their Bose docking station after the latest software update?

- Some users have reported similar problems after updating the iOS.  I do not remember if it was for the Bose.  You can look at the previous podiscussions on the right side of this page under the heading "More Like This".
You can also use the communities search box in the upright and search for: bose.
- Have you contacted Bose or went to their support site?
- f I recall, some accessores worked after reseting the iPod:
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Sometime a restore did it too. For some, nothing helped.

Similar Messages

  • APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

    APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
    I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
    Is Apple now in the bug trade business?, trade one for another....
    Anyone else have this problem?

    My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
    Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

  • Sony docking station speaker not working with iPod touch

    We bought a Sony docking station for the iPod touch (4th generation) we got our son for his birthday.  The speaker on the docking station works when playing the radio, but not the iPod touch.  We returned the docking station for another, and we are having the same problem.  Which is why I am pretty sure the problem is the iPod touch and not the docking station.  The docking station actually will charge the iPod, just not project sound out of the speaker with the iPod.  It will, however, project sound out of the speaker when using the radio.
    Is there anything simple I could be missing in settings?  I can't figure this out.  TIA!
    Nick's mom

    Use the communities search box in the upper right and search for
    sony.
    The go to advanced search and limit search to the the iPod touch forum.
    Recently there has been several users posted here with the same problem with a Sony dock. I do not recall if it was solved.

  • E70 no longer found with Software Updater (works w...

    I've updated my E70-2 before using the software updater. Even before the update was available, it would tell me at least that no update was available.
    A few days ago I ran it again to see if anything new had come out . The Software Updater updated itself and rstarted. Now, it cannot find my phone at all. Nokia PC Suite still finds it just fine, but the Software Updater claims it isn't found.
    I've already tried doing a hard reset on my phone for another reason but that didn't fix it. I noticed if I had the nokia connection manager open it would see the E70 just fine.
    Any ideas?
    My phone says this when I *#0000#
    2.0618.07.10
    31-08-06
    RM-24
    Nokia E70
    Thanks,
    -pdm

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • Why my docking station doesn't works with iphone 4

    I HAVE 2 DOCKING STATIONS (JBL AND YAMAHA) none of them works, does any one know how to solve this problem.
    Best regards

    The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
    Is the 'restore to factory setting' can make us must activate the ipad again??

  • Corporate e-mail no longer works after software update

    I recently upgraded to GB and can no longer get my work e-mail through Corporate Sync.  "The device cannot be provisioned on this server."  My IT group has changed nothing on their end.  I've tried several freeware apps with no luck getting errors like "This server requires security features your phone does not support."  Up until the software update, my phone was fine and I'd been syncing for eight months using corporate sync.  

    Thank you to the community for the replies.
    Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
    Thank you

  • Menu bar no longer working with IE update

    With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them.  From my vista machine it is OK but from my XP machine it does not show as being a link. The submenu's however do still work, here is the code, the first line is from the main menu and doesn't work, the 2nd line is a submenu and does work.
    Here is the site www.conundrumadventures.com
    From the main menu this is the code for "Adventures":
    <td id="002" class="link4" onclick="location.href='Teambuilding-Exercises-Adventures.php'"; onmouseover="changeC('002','link4h');" onmouseout="changeC('002','link4');" >Adventures</td>
            </tr>
            <tr>
    From within the adventures page here is the code for the submenu for  "Conundrum Metro":
              <td id="303" class="Sublink4" onclick="location.href='Outdoor-Team-Building.php'"; onmouseover="subchangeC('303','Sublink4h');" onmouseout="subchangeC('303','Sublink4');" >Conundrum Metro</td>
            </tr>
    Any ideas how to fix the main menu bar?
    Thanks
    Lynn

    I recommend doing away with your mouseover/mouseout links and convert to using Cascading Style Sheets.
    Here is a link to CSS tutorials: http://www.adobe.com/devnet/dreamweaver/css.html
    You don't say whether you are using Dreamweaver CS4 or an earlier version, but even if you are using that earlier version, you can type the code in yourself. Look especially at the tutorial chain "Designing with CSS", as there is a module that talks about a menu bar and how to make the links.
    Best wishes,
    Beth

  • Touch no longer works after software update

    After downloading new software update, I got an error message during installation.  Troubleshooting information recommended a restore.  After doing a restore and using the most recent backup (which turns out to be my ONLY back-up) I am unable to change playlist with iTunes.  I am unable to manually add anything.  ANY suggestions?

    Thank you to the community for the replies.
    Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
    Thank you

  • IPhone 4 Volume no longer works after Software Update

    Hey Guys,
         I just got a hand-me-down iPhone 4 and alas the Volume buttons, ringer switch is broken. I know it has since iOS 5.1 OTA Software Update and I was wondering if there was a fix? If so, please provide detailed instructions or a video. I do NOT want to jailbreak it since it would be tethered (iOS 6.0)
                        Thanks,
                                       bitman

    Thank you to the community for the replies.
    Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
    Thank you

  • HT1454 iphone 4, composite cable no longer works with ios6 update

    I have the iphone 4, and I used an apple composite cable to watch youtube, videos, etc on my TV through an AV input. But when I upgraded from IOS 4 to IOS 6, it no longer works. Says something along the lines of "accessory not supported" or close to that. The iphone used to go into a display mode, where nothing shows on the phone's screen, and everything shows on the TV. But now it doesn't even do anything but give me an error message. Any ideas?
    In sum, it worked before, but updated, and now no longer works.

    It was the cable connector seating.
    It looked fully attached, but on removal and FIRM attachment it worked.
    If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
    Message was edited by: jfaughnan

  • MPEG-2 files no longer working after Software update

    Quicktime 7.5 has been installed for a year and played .mpg files just fine up until today. Now it gives a "this is not a video file" error. The MPEG StreamClip Application for converting files also magically stopped accepting MPG unless I fork over $20 for some MPEG-2 component! What the heck
    Graphics card was upgraded from a 7300 to a 8800 yesterday and there were some Quicktime things in the Software Update which ran last night. Why would either of those eliminate my ability to view MPGs? Final Cut also quit functioning with those files.
    Need some help here fast!
    Thanks

    Sure enough! Went back and put the DVD in. One of the first thing it auto-installed was the component. Cancelled out the rest of the install and good to go.
    thanks

  • WiFi no longer working after software update

    I have had my iPhone 3g for about 3 weeks. Everything worked fine at first. I was able to connect to my home wifi. After updating the iPhone software - I noticed I could no longer connect. The network shows up and I enter my password but I cannot join. I also noted this at 2 open wifi areas - whole foods and a friends house.
    I have rebooted the modem, rebooted the phone, reset my network settings, and restored the entire iPhone. Nothing has worked. I spoke to Apple support and it sounds like they will send me a new phone...but I feel like this can probably be resolved with the phone i have, TIA!

    Hi erik,
    Does the iPhone have a Wi-Fi address? If not the issue and possible resolutions may be in this article: http://support.apple.com/kb/TS1559
    Does the iPhone get an IP address after joining the Wi-Fi network?
    Does the iPhone join and get a valid IP if wireless security is disabled?
    Jason

  • Yahoo "hyperlink" button is no longer working with latest update 3.6.6 yahoo edition 1.7

    I was prompted today to update Firefox to version 3.6.6, Mozilla Firefox Yahoo! Edition Yahook 1.7. After I installed the update, I noticed that in Yahoo! Mail some of the buttons above the message field are no longer active. I'm no longer able to click the "emoticon" icon, the "hyperlink" icon, or any of the remaining alignment buttons to the right of the previously mentioned. Those buttons have become locked, "unclickable" and they no longer show any alt text, therefore I'm unable to tell you the exact names of the buttons. (My main concern is the "hyperlink" icon.)
    However, I AM ABLE to click the following buttons:
    -Spell check
    - Font face
    - Font size
    - Bold
    - Italic
    - Underline
    - Text color
    - Highlight color
    (and that's where the working buttons stop)
    Any assistance would appreciated.
    == URL of affected sites ==
    http://www.mail.yahoo.com

    It's not a hardware issue. I have the exact same circumstance. After being prompted and then updating the software on my shuffle, it quit working. All I get is the green-orange flashing light. iTunes recognizes it's connected, restore works, and syncing works, but the shuffle does not work.

  • Many Apps no longer working after software update

    I recently updated my iPhone software and since then many of my apps don't work. usually wat happens is that when i click on an app the screen will go black for a few seconds then go back to my home page.

    Many applications aren't yet update for compatibility with the 3.0 software... that could be a part of the problem with some of your apps.
    Suggest you try the following 2 steps. Do the first step and see if that fixes the problem If not, do the second.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

  • Burner no longer working after software update 10.4.10

    My burner on my iBook G4 was just working last week. I just updated to Mac OS X 10.4.10. Now when I put a CD in, OS X asks me if I want to ignore or open the CD with an application like normal. Then when I try to burn something to the CD, the CD-ROM drive tries to access the CD-R multiple times before it gives up when I eject it. It can still read CDs and DVDs, but just cannot burn CD-R's. I tried multiple blank CD-R's that I worked before. I also tried restarting and the startup diagnostic passes. Definitely seems like a software issue.

    Hi erik,
    Does the iPhone have a Wi-Fi address? If not the issue and possible resolutions may be in this article: http://support.apple.com/kb/TS1559
    Does the iPhone get an IP address after joining the Wi-Fi network?
    Does the iPhone join and get a valid IP if wireless security is disabled?
    Jason

Maybe you are looking for

  • F-22 and FB70

    Hi, I see two transactions F-22 and FB70 both for posting Customer Invoice, are there any difference in them?

  • Isight camera "not connected" but IS in USB configuration

    My iSight [BUILT-IN] camera keeps being reported as "There is no camera connected" in 'Photo Booth', though it Does show up in the USB configuration of System Profiler, and most times still functions OK using Google Video Chat. (for the first 'known'

  • Contacts get stored with different names

    Hi, I have had this problem for a while now, i even got a new Q10 and still problem exists. whenever i store a new contact with a new name it gets stored but the display name is something totally different it will choose one of my existing contacts f

  • CFolder Integration for Shopping Cart

    Experts, Can we have cFolder integration for Shopping Carts? (For example, in single part RFx, in header notes and attachments tab, we see Collaboration -> create/assign/delete buttons). If YES: what we have to do to achieve this? If NO: why we canno

  • Sound problems - HP Pavilion g6 Notebook

    Hi,  Over the past few days sometimes I have had no sound. Restarting the computer or leaving it a while fixed it sometimes but not others, so it's basically coming and going. When I try to mute it (not that there's any sound anyway), either using ke