Both iMac and powerbook can't connect to internet via Airport.

I have an iMac that is directly wired to an airport base station and a G4 powerbook that connects via a card. Neither can connect to the internet. The iMac is set up as follows:
Cable modem > ethernet cable to WAN port on AEBS > ethernet cable from AEBS to iMac.
The powerbook detects the base station and created its own network as soon as it did, yet still nothing. The first and third lights on the AEBS flash as to show activity and I have unplugged the modem to reset it multiple times.
I am completely confused as to what is going on. Can anyone please help?

If it helps any, I'm in the same boat. I've had an AEBS that has worked well until yesterday. Now, my Powerbook can't connect to the internet via wireless or ethernet (connected directly to the AEBS). My POwerbook CAN talk to my networked HD. To make things worse, my two Tivos (connected to the network via an Airport Express & WDS) CAN connect to the internet.
I'm totally confused. Since I can't connect to the internet when directly plugged into the AEBS, but can connect when I plug directly into the cable modem, I think I'm going to just buy a new AEBS...

Similar Messages

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • Can't connect to Internet via Airport but CAN via Ethernet

    Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

    CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

  • Can't connect to internet via AirPort, but am getting full signal strength.

    I can connect to the network, but can't connect to any website on the internet. My laptop PC is able to connect to internet & network wirelessly..... but it's just my MacBook that can't.
    Thanks & happy thanksgiving.

    what ip address to you have in your laptop?
    is it set to DHCP or did you manually enter in a ip address in your network preferences?

  • Can't connect to internet via airport expres !

    Hello.
    I recently just made a wireless network in my home using airport express.
    I have configured the internet on my macbook. The internet is fine, perfect!
    But on my windows vista, it sees and connects to the express. But theres no internet.
    Please help me fix this problem so i can use the internet at the same time both on my macbook and my vista.

    Hey,
    No i havent find a solution sorry.
    I have been looking everywhere .
    But on my other post
    http://discussions.apple.com/thread.jspa?threadID=1916488&tstart=0
    There some helpful things there, try those but it didn't work for me.

  • Can't connect to internet via AirPort Extreme with Laptop running Vista

    I've seen a lot of posts on this topic, and maybe I'm just out of luck, but anyway...
    My PC running XP can connect to the internet through the AirPort Extreme, but laptop will not. I load the AirPort Utility on the laptop. Should I be able to see the base when I run the Utility? It does not see it. I can see the wireless network with excellent strength, but all I can do.
    If I can't get this to work, I'm going to just return it and to back to the wireless router. I was enticed by the ability to connect the printer and external hard drive to the base. I would like to get rid of the PC and just use my laptop for everything.

    Looking over your original post again, I think I might have misunderstood you the first time. If I understand you correctly, your Vista laptop can see the wireless network and connect to it (so you have access to the Internet), but you cannot see the Airport Extreme Base Station when using Airport Utility.
    If your Internet connectivity is not an issue and it's just that you can't see the base station in Airport Utility to configure it, try using an ethernet cable to connect your Vista laptop to one of the LAN ports and see if the base station shows up in Airport Utility then.

  • Can't connect to internet via airport after switching off

    I can create a new network connection and successfully connect to the net. However when I come back to surf later after a couple of power downs it will not connect. My mac can see the network, recognise the name and security type but will not allow connection, even when I retype any password accessing via other network. I've tried setting up a location, used it once but on power back the same issue happens. I can surf via a LAN cable no problem. Help!

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

    After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
    They can't connect via wifi neither via 3G.
    If I restart the devices they start to connect again.
    I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me,  but the issue still persists.
    I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
    Anyone has having the same issue?

    After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
    See if that helps.
    Good Luck!

  • Mac connected but PC can't connect to internet through Airport Extreme

    When I was using a dial-up connection everything worked fine on both computers but since I changed to a PPPoE / Ethernet connection my PC using Windows XP can't connect to the internet although is connected to the Airport with excellent signal.
    In System Preferences>Network I have Connect using PPPoE option checked so I can't see my airport in the Airport Admin Utility. Apple Talk is Inactive.
    In System Preferences>Sharing>Internet: Internet sharing is Off and there's a text that it can't be turned on "because there are no ports available over which to share your connection"

    I understand, but for some reason, that I'm trying to
    figure out, when I uncheck the PPPoE option on my
    computer and my base station appears in the Admin
    utility, I loose my internet connection on the
    macintosh although the Network Status says that I'm
    connected to the internet via Airport...
    You will need to configure the Airport to connect via PPPoE.
    iFelix

  • Can't connect to internet through Airport Express anymore

    Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
    Thing is, Airport/wireless is working. Can stream audio to my home stereo.
    And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
    Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
    What gives?
    Any ideas?

    Hello mnkyby. Welcome to the Apple Discussions!
    It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
    Try this ...
    o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
    o Go to the Internet tab.
    o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
    o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
    If the latter, try the following ...
    Modem/Router Power Recycling - Quick
    o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
    o Power-on the DSL/Cable modem; Wait at least 5 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the DSL/Cable modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)

  • 24" imac 2.4 says connected to internet via airport--but does not

    I just got a new 2.4ghz 24" aluminum imac. There are three other macs in my house, all of which connect to our wireless network and are able to browse the internet. This new computer can connect to the network, yet it always has one of two problems: either it says it is connected to the network, but can't access the internet, or it says it is connected to the internet via airport, but when you open your web browser, no such luck. Many times when I open the network preference panel, there is no router number assigned. Sometimes there is. I can connect to other networks in the neighborhood that don't require a password just fine (how I'm writing this). Why can this new machine not connect, when all three of the other macs in the house have no problem?
    anyone, please help. this is frustrating.
    thanks,
    keegan

    OK but, like you, my other machines (PowerPC iMac and Power Book) did seem to work OK while the new iMac was playing-up. It was only when I noticed that the Old iMac had not downloaded some podcasts that I started to look at the router. I now remember having a similar problem a few years ago - frequent failure to automatically log-in to the router, occasional failure of manual log-ins and slow/unreliable connection once logged-in. A new router fixed the problem. It's a real pain but there you are. Must remember to keep receipt of current router and kick-up a fuss if it fails within the guarantee period.
    Sorry if this doesn't help but I thought it worthwhile posting my experience over the last 2 days.
    Have you tried connecting to your router by ethernet?
    I'll let you know if the problem returns but all is sweetness and light at present.

  • Network prefs: "connected to internet via airport"... but can't go online??

    I've got steady green lights on my airport express and modem/router; and in Network Preferences it says that I am connected to the internet via Airport (green light here too). BUT, I can't get online with any of my browsers or my mail client. What's going on here? Help appreciated.
    Thanks
    eMac 1GHz, iBook 14" 1.33GHz   Mac OS X (10.4.8)  

    If you have a Modem Router combined and an Airport Express
    The Express must be set up to NOT DISTRIBUTE IP's.
    You do not mention what brand Modem or Router or Modem /Router combined. Your network confiquration can very a little depending on what you are using.
    If you are using all Apple Airport products the confiquration is pretty straight forward.
    If you are using 3rd party products then the set up can be a little different.
    From what you say in your post you are using 2 routers, my quess is the Express is set up to distribute IP's and if your other router is set up this way then thats your problem.
    Don

  • Nokia N8 Can't connect to internet via WIFI

    HI!
    I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot)  with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
    Solved!
    Go to Solution.

    alucard3 wrote:
    Resolved by unofficial but efficiently hotfix.
    http://www.n8fanclub.com/2012/12/wlan-connectivity​-software-update-for.html
    Hi am having the same problem but the link above does not work?
    Thanks
    ledders

Maybe you are looking for

  • How do I stop the type from bitmapping?

    I updated my website to iweb 08 and had to rebuild various pages. but the biggest bad surprise was that while the type in the hyperlinks in the earlier version worked fine, now they are bitmapped. and it seems on some pages my type is all bad. it's l

  • Uploading Material Master data from legacy system

    Hi all, do we have any sap defined bdc for material master data ,if no ho to do that can anybody explain me step by step procedure how to do that Thanks in advance Santosh R

  • PO, PR 의 승인을 위한 NOTIFICATION 이 발송되지 않았거나 삭제된 경우 NOTIFICATION 메일의 재발송 방법

    제품 : MFG_PO 작성날짜 : 2004-11-29 PO, PR 의 승인을 위한 NOTIFICATION 이 발송되지 않았거나 삭제된 경우 NOTIFICATION 메일의 재발송 방법 ======================================================================= PURPOSE Purchase/Requisition Approval Notification 메일의 재발송 방법. Explanation N

  • Trouble with Environmental Variables

    I am having a heck of a time setting the path varialble for J2skd1.4.0. I am using XP home edition and this is the path %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Common Files\Adaptec Shared\System;c:\j2sdk1.4.0\bi

  • Will Mainstage 3 work on OSX 10.7.5?

    Wanting to try Mainstage for live guitar work. Will Mainstage 3 work on my mac, I can't uphgrade because of work programs that require 10.7.5