Both instances of rac is getting start automatically

Earlier we use to start both the instances of RAC manually but from last one week
both instances of rac is getting start automatically when we starts the unix machine
DB Name - Kumaondb
instance1=Kumaondb1
instance2=Kumaondb2
I want to start them manually,
May someone help me ?
Thanx !
Deep

If you not using ASM with your database then simply change the Y to N in the /etc/oratab file.

Similar Messages

Why RAC services doesn't start automatically?

Hi All,
I have 2-node 10gR2 RAC installed on RHEL4. Whenever i restart the server, the services related to RAC are not starting automatically except VIP related services. Manually i have to start the services using crs_stop and crs_start commands. then, everything will be fine and working. There was no problems or error occurred while installation.
Whenever i restart my node VIP addresses which are in DNS takes about 10-15 mins to resolve, means to show up in ifconfig -a output. Is this related to service not starting automatically?
Can anybody tell me what might be the problem?
Thanks,
Praveen.

when a failure occurs, the cluster will put things back to the state they were in at the time of failure. So if your database is running and the node crashes or is rebooted, then the services should start because the target state is ONLINE. If you do a srvctl stop database, then this is a assumed a planned shutdown so we stop the database and the services (dependent resource as Erik says). If after you have successfully stopped the database, the target state of the service is OFFLINE. If you reboot at this point, then the database and service should not start.
All databases should work the same if they were created the same. There is not enough information in your post to know why they did not start. If it continues to be a problem, contact Oracle Support and they can help figure out the differences.

Sql Server Agent not starting automatically in failover in a clustered environment.

Hi,
We are running Sql Server 2008 R2 as a 2 node cluster in Windows 2008 R2
server. In the Sql Server Configuration manager we find that service of
the Sql Server(database engine) as got a start mode as manual being
an instance in the 2 node cluster. When the node in which the service is
running fails the the Sql Server service gets started in the other node. However
we find that the Sql Server Agent service(whose start mode is also in manual)
does not get started automatically in the other node along with the Sql Server
service.Why does the cluster service do not start Sql Server agent service as well.
Should we make the Sql Server agent service start mode to be automatic
instead of being manual as it is now? Thanking you in advance
Binny Mathew

Folks - the startup type of all clustered services should be set to manual - when you virtualize SQL Services, they are put in manual startup mode and this should not be changed. It is the cluster manager which starts the SQL and SQLAgent when a
failover happens (SQL does not start SQLAgent). If your SQLAgent doesn't start after a cluster failover, check the SQLAgent logs to see what the root cause of the problem is and rectify it. You should not change the startup type to "Automatic" -
leave it as manual
Satish Kartan www.sqlfood.com
I suspect that your clustered SQLAgent resource is currently NOT dependent on SQL resource. If not, make SQLAgent dependent on SQL resource, which will coerce SQLAgent to wait for the SQL resource to come online before it brings itselft (SQLAgent) resource
online, when a failover happens.
Satish Kartan www.sqlfood.com

My database does not start automatically

i am using windows 2000 server and oracle 9.0.1, my database does not start automatically when i am booting the system.
in regedit autostart is there, my service is getting started automatically and i used startmode auto in my oradim command but still i have to manually log in to start the database, PLS help!!!
another issue is that i want to startup/shutdown the database using a user other than sysdba, pls tell which permission shud i grant as dba, connect, resource permissions are not doing the required job

spfile concept is introduced from Oracle 9i. You can call it system parameter file. Benefits of having spfile concept is that what ever changes u make to system through commands
alter system set ??? = ????
get automatically saved in the spfile???.ora which is managed by Oracle.
Main idea behind that as thought by Oracle is that previously u needed to change that parameter in init.ora file then start the database again after shutdown. Now u are doing everything online. spfile???.ora takes priority in the new Oracle concept.
If u delete spfile???.ora file, then it needs some specific init.ora which need to told to Oracle which can be through command like
startup pfile='complete patah .............'
Bansal

Help Required...Web Service does not start automatically...

I have a web service created with a EJB, everything is fine now.
After restarting the Server, web service doesn't get start automatically.
I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below.
<start-up mode="always"/>
But it still doesnt start. any help is appreciated.
This is the document i have referred.
http://help.sap.com/saphelp_nw04s/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thanks,
Sridhar
Edited by: Sridhar k on Jan 5, 2009 9:11 AM

Hai,
Just a tought...:-|
Check the value in your file, is it typing mistake or you have entered the same in your file.
<start-up mode="always"/> it should be <start-up mode="always">.
Regards,
Yoganand.V

Oracle 9i not sgetting started automatically

hi
Oracle 9i not getting started automatically after installation on windows 2000 does it works properly on windows 2000 has anyone installed it before with out problems
i have to connect internal and then it mounts the database
can anyone please tell me the solution of the problem
Thanks
Ravi Gitta

this forum is for 9iAS
you may get an answer from "Oracle9i Database Beta Forum"

J2EE server not getting started.....NO Activeuserstore is set...

Hi,
I have installed NW2004s.After patch installtion, when I tried to start my server, the Java Instance(server0) is not getting started.I saw postings in SDN but i couldnt find any helpful answers,now again posting it because i think anyone of u might have solved it.Could u please tell me what is the solution, as I have to finish it before EOD and I ve to run my scenarios..I have a demo tomorrow.Waiting for ur reply.
It is saying "No Activeuserstore is set"...
Replies will be highly "appreciated".
Expecting replies,
Manikandan Rajendran
Message was edited by: manikandan rajendran

Hi Manikandan,
I'm not sure waht the problem is but check this.
http://help.sap.com/saphelp_nw04/helpdata/en/57/ef429d748ba84f83d9a6800c8cf252/frameset.htm
Hope this help!
Juan
PS: don't forget to reward if helpful

OracleOraHome92ManagementServer service is not starting automatically

Hi all,
OracleOraHome92ManagementServer service is not starting automatically, though we have set it to start automatically. We get the following error message when we tried to start manually.
"Could not start the OracleOraHome92ManagementServer service on Local computer.
The service did not return an error. This could be an internal winodws error or an internal service error."
If we restart the entire server , then OracleOraHome92ManagementServer service is getting started automatically.
Kindly assist me in resolving the issue.
On analysing we find the error messages below is the error message.
VXA-2028 :
Unable to connect to OMS repository.
at oracle.sysman.vxa.VxaAppServer.startServices(VxaAppServer.java:1596)
at oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:3144)
Error starting Oracle Management Server.
VXA-2028 :
Unable to connect to OMS repository."Could not start management server. Initialization failure"
OEMCTL for Windows NT: Version 9.2.0.1.0 Production
Copyright (c) 1998, 2002, Oracle Corporation. All rights reserved.
Starting the Oracle Management Server... [main][2012-1-4:9:14:7:67] VdbSession.processError: errorCode >12505<
[main][2012-1-4:9:14:7:67] VdbSession.processError: errorMsg >ORA-12505: TNS:listener could not resolve SID given in connect descriptor
<
[main][2012-1-4:9:14:7:67] VdbSession.processError: invalid connect string
[main][2012-1-4:9:14:17:129] VdbSession.processError: errorCode >12505<
[main][2012-1-4:9:14:17:129] VdbSession.processError: errorMsg >ORA-12505: TNS:listener could not resolve SID

If you check internet most times it is about adding the ip address and hostname (+ FQDN ) in C:\WINNT\System32\Drivers\Etc\Hosts file. Do you have that in your hosts file?
Eric

Asm, instance and service failing to start 10g rac redhat el5

hi,
i have been following a how to guide from oracle's website about implementing a 10g rac system using el5 (http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html), by the end of the installation and setup I had both the nodes up and running and all services were up and running. Then under the root account I rebooted one of the nodes. now when I check the status of the services I get this:
[oracle@rac01 ~]$ crs_stat -t
Name           Type           Target    State     Host
ora.orcl.db    application    ONLINE    ONLINE    rac01
ora...._taf.cs application    ONLINE    ONLINE    rac02
ora....cl1.srv application    ONLINE    OFFLINE
ora....cl2.srv application    ONLINE    ONLINE    rac02
ora....l1.inst application    OFFLINE   OFFLINE
ora....l2.inst application    ONLINE    ONLINE    rac02
ora....SM1.asm application    OFFLINE   OFFLINE
ora....01.lsnr application    ONLINE    ONLINE    rac01
ora.rac01.gsd application    ONLINE    ONLINE    rac01
ora.rac01.ons application    ONLINE    ONLINE    rac01
ora.rac01.vip application    ONLINE    ONLINE    rac01
ora....SM2.asm application    ONLINE    ONLINE    rac02
ora....02.lsnr application    ONLINE    ONLINE    rac02
ora.rac02.gsd application    ONLINE    ONLINE    rac02
ora.rac02.ons application    ONLINE    ONLINE    rac02
ora.rac02.vip application    ONLINE    ONLINE    rac02though I can start the asm instance manually by
srvctl start asm -n rac01and it starts but the instance and service on the rebooted node still wont start. is there a log file which tells me what the error is when it tries to start the instance? what can I do to ensure that if a node is rebooted that all of the services get started correctly and the node automatically rejoins the cluster (i thought I had set all of this from the instructions of the guide I was following).
Regards
Martin.

Check ASM resource:
crs_stat -p "resource_name
$ crs_stat | grep NAME\= | grep ASM1
NAME=ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
ACTIVE_PLACEMENT=0
*AUTO_START*=1
CHECK_INTERVAL=600
DESCRIPTION=CRS application for ASM instance
What do you see AUTO_START?
if 1 = auto start:
or check error ASM while start... at ASM_HOME/log/rac01/racg/*
If AUTO_START=2
Oracle Clusterware is configured to start the VIP, listener, instance, ASM, database services and other resources during system boot. Starting with 10.1.0.4, it is possible to modify some resources to have their profile parameter AUTO_START set to the value 2. This means that after node reboot, or when Oracle Clusterware is started, resources with AUTO_START=2 will need to be started manually via srvctl. Please work with Oracle Support if you need to modify this attribute.
If AUTO_START=2 and need to change to 1:
Example:
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
ACTIVE_PLACEMENT=0
AUTO_START=2
$ crs_stat -p ora.rac01.ASM1.asm > ORA_CRS_HOME/crs/public/ora.rac01.ASM1.asm
$ crs_unregister ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
CRS-0210: Could not find resource 'ora.rac01.ASM1.asm
$ vi ORA_CRS_HOME/crs/public/ora.rac01.ASM1.asm.cap
AUTO_START=2
to
AUTO_START=1
$ crs_register ora.rac01.ASM1.asm
$ crs_stat -p ora.rac01.ASM1.asm
NAME=ora.rac01.ASM1.asm
TYPE=application
*AUTO_START=1*
Edited by: Surachart Opun (HunterX) on Jul 31, 2009 1:06 PM

RAC CRS not getting started

Hi,
We had installed RAC DB namely ORCL on a two-node cluster abcoracledb01 and abcoracledb02 with the OUI launched from db01 node. After installation, the NETCA is able to identify the RAC DB ORCL on both the nodes as well as the ORCL1 instance on db01 node and ORCL2 instance on db02 node. Now when I try to launch the DBCA from db01 node, it prompts me with the two normal options Real Applications Cluster database and normal database on its welcome screen as it detects the CRS running on this node. The problem is coming when Im trying to launch DBCA from the second node as it does not extends the RAC option in its welcome screen. I can understand that the CRS is not running on this db02 instance and and i verified this by running the OLSNODES -v command that gives me an error stating that the cluster interface is not getting started.
Will highly appreciate if anyone can help me to get some referenctial documentation or diagnostic information that may help me in troubsleshooting the exact reason behind the CRS not getting started.
Thanks,
Manoj ([email protected])

Ummm... Why are you trying to run the DBCA twice? The DBCA is really only there to give you a starter database configured for either OLTP, OLAP, or multi-purpose, but since both nodes will be attached to the same database, you shouldn't run the DBCA more than once. Once you have the database created with DBCA, attach the second node to it and go. Your problem is not with DBCA, it's in the cluster interconnect. Once that starts up, the second instance will attach to the database and go.

3 node RAC -1 instnance getting down automatically in one node

Hi,
We have 3 node RAC system.
We are facing issue every week that one of the instance in one node among three node getting automatically restart.
During the time our transaction missing happened. Kindly advice why one node itself getting down and start automatically.
Thanks
Raj

Hi,
As you are facing node eviction issue, to find out reason please share following details:
1. clusterware alert log file
2. cssd.log file
3. crsd.log file
4. No. of voting disks (*sometimes if you have only one voting disk, one node will be evicted automatically as i have observed*)
Regards,
Ashish Shukla

After backup, TM cannot eject itself automatically, and then both my mac and TM get high temperature. why is that, I had the same problem twice.

after backup, TM cannot eject itself automatically, and then both my mac and TM get high temperature. why is that, I had the same problem twice. I re-start my mac, it doesn't work at tall, still the same problem.

Are you saying, right now that the TM refuses to work even after a re-boot?
Is the light solid green at least?

Db instance doesn't start automatically

Hello,
I have a problem with a db instance that doesn't start automatically when the system restarts. I have searched in the forum, and I have found similar questions, but their answers don't fix my problem.
I have Windows Server 2003 and Oracle10g. More information:
Services:
OracleOraDb10g_home1TNSListener service is started (and its startup type is automatic)
OracleServiceLAB service is started (and its startup type is automatic)
Registries in Windows:
ORA_LAB_AUTOSTART=true
ORA_LAB_SHUTDOWN=true
ORACLE_SID=LAB
System variable:
oracle_sid=LAB
When the system restarts, the services are started but the instance is down I get "ORA-01034: oracle not available". In the oradim.log file I see this error: ORA-12560: TNS protocol adapter error occurred.
I suppose that it can be a problem with the connection service name, but I don't know which one and why, because I have defined the oracle_sid system variable (it's true that without it the problem was the same).
Can anybody help me? Thanks in advance.
Best regards,
Arantza

ok , it seems there are some notes on metalink about diagnosing this error.
ORA-01034: oracle not available".
see below:
Oracle indicates the following possible causes:
The SGA requires more space than was allocated for it. Can you check how much SGA you have and memory
The operating system variable pointing to the instance is improperly defined.
And ORACLE recommends the following remedial action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. Retry after ORACLE has been initialised. If ORACLE has been initialised, verify that ORACLE was linked correctly. Also, refer to the installation or user's guide for additional information about this error.
After exhausting all other options, a simple reboot has been observed to resolve this error.
Regards

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.muli

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?

found it in another area
Where do I find the cc getting started Katies.mulib File ?

How to get start and end time of an ESB instance in SOA 10.1.3.4

Hi All,
I am using soa 10.1.3.4 and want to track the esb instance start and end time. (For example, in case of bpel we can query the cube instance table to get creation and modify time of an instance. )
How to get that in esb?
Thank you.
Regards,
Satish

Hi Satish
You may enable instance tracking option on the ESB Console and track the instances audit information and also from the logs(log.xml) when ESB loggers are set to DEBUG mode.
Regards
A

Both instances of rac is getting start automatically

Similar Messages

Maybe you are looking for