Both my Wifi and my iCloud backup are greyed out.

My wifi and iCloud backup are greyed out on my Iphone 4S and i can't switch them on. I have erased all content and then restored it but it doesn't work. What should I do to fix it?

Use this article: support.apple.com/kb/ts1559
Follow all of the troubleshooting steps.  You can even try restoring the device as new: support.apple.com/kb/ht4137
If the wi-fi remains greyed out, your device needs service.
If within warranty, it should be free.
If not, it will probably cost $199 USD + tax.

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • I have transferred my itunes to a new phone and all my apps are greyed out on itunes

    i have transferred my itunes to a new phone and all my apps are greyed out on my itunes account,the apps still work fine on the phone

    Nothing is stored on the sim card on an iPhone.  If you backed up to your computer the backup will contain your calendar events.  Otherwise, if your phone isn't functioning there is no way to back up or extract your calendar at this point.

  • I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

    when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
    Running macbook pro 2.53ghz late 2010
    mountain lion
    8gbs mem

    I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

  • I have made a swirl, but the allign stroke inside, and allign stroke outside are greyed out. Why? And how can I fix it?

    I have made a swirl, but the allign stroke inside, and allign stroke outside are greyed out. Why? And how can I fix it?

    Thank you, that kind of explains the why. Is there a how? Meaning is there a workaround? Basicly I have two strokes. One white thin stroke on the path (black background), Now I want my second stroke (which is a blue gradient) to start from the path and continue inward, as if it was "alligned innside"

  • TS3992 All of my ICloud options are greyed out, how do I activate them?

    I cannot get iCloud to activate.  It instructs me to go to my email and follow instructions. There is nothing there.

    Ensure that your document is either RGB color or grayscale and 8 bits/channel for the filter gallery to work.
    Which shortcuts don't work with smart objects?
    Certain ones may not work, because smart objects are not pixel layers.
    Did you look on the menus to see if those commands are greyed out?

  • IWeb window won't load - and all menu options are greyed-out

    I've used iWeb before (with a web site set-up), but I tried to open it today and the iweb screen would not open. The program menubar loads, but almost everything,including New Page and New Site are greyed out.
    I checked my ME account and it is active and working.
    Not sure what the problem is here - any ideas?

    Hi, I had the same problem!
    After one evening of pulling my hair out, I tried the following:
    1. Located the 'domain' file (or package). In my case at /*user/Library/Application Support/iWeb.
    2. moved the domain file to the desktop (or somewhere else)
    3. Started iWeb. I got the warning that iWeb needed a domain file in order to operate, and I confirmed that I wanted the program to create a new one for me.
    4. iWeb started as normal, but with no contents. I closed iWeb.
    5. I ctrl-clicked the original domain file on my desktop, and selected 'show package contents'.
    6. I ctrl-clicked the new, empty domain file in the Application Support/iWeb directory, and selected 'show package contents'.
    7. I deleted everything in the new, empty domain package file.
    8. And finally copied the contents from the old (seemingly corrupt) package file into the new one.
    9. Hooooray! iWeb started with the old contents intact!

  • Save and Save As options are greyed out

    I have an install of Adobe X Standard. An external source is sending in PDFs which are marked as Secured. However, according to the creator of these documents, only editing has been locked down, not Save or Save As functionality. When I open the document, all Edit functionality, as well as Save and Save As are greyed out.
    This is a new install of Adobe X. These documents could previously be saved using the same version of Adobe, but that machine needed to be re-installed due to OS instability. After re-installing Windows 7, then Adobe X, then updating to 10.1.13, these functions are now missing. I have no idea as to why. Does anyone know what might be causing this? Again, I've verified with the original creating that Save functionality shouldn't be disabled.

    There is no security setting that locks out save/save as.
    Save is greyed out when a file has not yet been changed, so that is normal. Save AS should not be greyed out at all. Don't know why that should happen.

  • TS1717 I have logged onto Itunes and all my songs are greyed out and I cannot play any of them.

    I have paid for a year to have Itunes available on another computer but when I go in, all the songs are there but they seem to be greyed out and none of them will play.  I cant seem to find out what is wrong here.  I have checked my account and its all up to date.  I only have the two computers running on this scheme.  Any suggestions?  (I am not computer literate so please advise for a novice).  The main computer for Itunes is XP and the second computer is Windows 7.

    Try:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    The grey-out ones may not be recoverable.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have over 10,000 songs that I have copied from my vinyl and tape libraries. I was able to use all of them until I loaded IOS 5.0. I can see all of them on my phone and PC, but most are greyed out on the phone. How can I use all of my music.

    Let me know if you have any answers.

    I did not upgrade to the newest version of Itunes on my PC.  I just now went to my Library were Music is listed. Under that is Movies, TV Shows, ItunesU, etc.  When I opened my music list, each song was in numerical order.   If I have the songs listed alphabetically, they are in numerical order.  If I change my listing to album or whatever, the first song is listed in numerical order just as I showed in my original question.  They are also numbered on my Playlists.  I have my favorites in two different playlists.  One of them was minus a song.  I was able to see which one was missing because they were in numerical order.  I know I could have just copied to correct one into the incorrect one and just skipped the duplicates, but I chose to do it this way.
    So, the songs are listed numerically in my music folder under Library on my older version of Itunes.  But, on my newer version, they are not listed numerically under music.  Maybe I'm doing something wrong?????
    Thanks so much for your help.  I wish they would just leave things alone.  I would gladly go back to the older version on my other computer, but???? 
    Again thanks. 
    Marie

  • Since updating to firefox 25 my "undo closed tab", "restore recently closed tabs", and "restore previous session" are greyed out, I have tried resetting default

    I have only had this problem since updating to firefox 25. I have already tried resetting the ff deafaults. it did restore the "undo close tab" for a short while. but when i exited and restarted ff i have the same problem again. I don't want to have to keep resetting the defaults, because it is too time consuming to then set all my preferences again.

    I had the same difficulty. Could not use the Ctrl+Shift+T combo to undo close tabs. The solutions mentioned here did not work. I turned off the add-on "Tab Mix Plus" and the keystroke combo worked. Updating to the latest version of Tab Mix Plus solved the issue.

  • HT201272 Some songs are greyed out while others are black. What does this mean and how can I change it? I'm tired of only 2 or 3 songs from an album repeating while the others disappear off the "Up next".

    Please help....I hate iTunes to begin with. Especially the latest they have come up with. Layout drives me crazy. And now....I find maybe a couple of songs in an album as "black" and the other titles are greyed out. What does this mean? I find it very frustrating as the black titles will repeat but the others seem to just disappear off the "play next" list. How can I fix this? And no...downloading from iCloud hasn't helped any.

    This sounds like you have some unchecked tracks. These are skipped during track to track playback. The track names are slightly greyed out in the album view. You can normally see the check boxes from the Songs view or you can change the status via the rght-click context menu.
    tt2

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

  • TS1574 Hi, I dont have sound on my imac. The options in sound are greyed out and there is nothing in the output list

    itunes and you tube are not working.  There is no sound. When I am in itunes and play a song, the song does not start.
    I checked system preferences, sound.  There is no output options and the input options are greyed out.
    Does anyone know how to fix this problem?
    Thanks

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Some of my iTunes match songs are greyed out on my iPhone

    Hello,
    I've had iTunes match since it came out, and it was shaky at first, but started getting pretty reliable a few months ago. However, the last few albums I've added to iTunes match have not been added to the cloud. The songs appeared as "Waiting" for several days until I right clicked and clicked add to iCloud. Once I did that, they showed up on my iPhone and iPad, but now are greyed out on both, even though their iCloud status says "Uploaded".
    It gets worse. The last album I dragged into iTunes is stuck on "Waiting". When I right click, I no longer have the ability to add them to iCloud (this may be due to the Yosemite beta – the issue with the greyed out songs has been occurring for a few weeks before I upgraded, though). These songs don't appear on my iPad or iPhone (which I expect), but they do appear on my MacBook. However, when I click to play or download them, nothing happens.
    This is very strange behavior, one thing worth noting is, I just crossed 1,000 songs for this artist (I'm a fanatic). I'm not sure if there's a limit of songs per artist, and I haven't counted exactly how many songs are greyed out, but the numbers are definitely close.

    Have a look at this: iTunes Store: Troubleshooting iTunes Match
    But yes, if you are running OS X beta, you very well could have issues. You should inquire about that in the Developer forums.

Maybe you are looking for

  • Profit Center Accounting in ECC 5.0

    We are on ECC 5.0 and having some issues with profit center accounting.  Is there any way that I can tell if Profit Center Accounting has been fully configured? If anyone has any documentation, I would greatly appreciate it. Here are the problems: 1.

  • Resizing components

    hi pals, i've got some problem with creating gui again. I have scrollpane and a canvas in it. The thing is that the stuff drawn by paint(Graphics g) method in canvas has no effect on size of the canvas itself, so the scrollpane wouldn't show the scro

  • Selecting multiple objects in Pages '09

    Hi everybody, I was just wondering how to easily select multiple objects in Pages, as in Keynote. I mean, in Keynote you can just drag the mouse over the objects you want to select, and that's it. But in Pages I haven't be able to do that (not even w

  • Link problems

    Check the link in the top left corner. http://www.liquidfirefishing.com. Nothing happens when I click on, however when I right click and hit open link it opens the page. What do I need to do to fix the problem?

  • File transfer to XI sever

    Hi Experts , I have all the data in my internal table , now i have to place that data in the form of TEXT file and plcae it to the XI server. Please let me know whta needs to be done to place the file in XI server. thanks in advance..