Both Net Manager and .Exe fail during installation of Presenter 10 for Windows
I have received no help from Adobe. Both the online Net Manager, and the downloaded .Exe file fail to extract and install Presenter 10 to any destination I attempt.
nobody can tell you anything without proper system information and a more detailed explanation Like what you have actually tried already. Your post is too vague and generic.
Mylenium
Similar Messages
-
SQLServer2012-KB2716442-x64 failing during installation
I tried to install recent update for SQL server 2012 and I cannot:
SQLServer2012-KB2716442-x64 failing during installation, both Windows Update and manual setup.
The last entry in log before rollback is following:
10/10/2012 19:07:04.981 Attempting to run user requested action from media ScenarioEngine.exe
10/10/2012 19:07:04.981 Attempting to launch process d:\3a871c25ddff78ec44f571\x64\ScenarioEngine.exe
10/10/2012 19:11:15.917 Process returned exit code: 0x858C001E
10/10/2012 19:11:15.917 Media ScenarioEngine.exe returned exit code: 0x858C001EThis is the root cause
The machine is clustered, but the cluster is not online or cannot be accessed from one of its nodes. To continue determine why the cluster is not online and rerun setup instead of rerunning the rule since the rule can no longer detect a cluster environment
correctly.
I see from the summary log that the installed instances are not clustered, I would suggest the following if the machine is cluster enabled try to see why is the cluster is not online
Second if the machine is not clustered below thread suggest that this ruel is being excuted though the machine is not c;ustered due to media corruption, one advice here is to re-download the patch, decompress it to local folder then run setup from local
folder
http://social.msdn.microsoft.com/Forums/en/sqlgetstarted/thread/86d3ca43-287a-4195-bc6f-3752215e09df
to decompress patch run the following command
<patch.exe> /x:"c:\SQLServer2012CU"
the launch setup from c:\SQLServer2012CU
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread. -
My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?
What do you mean he chose his and your number during setup. Chose them for what? Is you number showing up in the Settings>Messages>"You can be reached by imessage at" section? If it is he needs to remove it.
Cheers,
GB -
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
-
PSC 1410 driver and fatal error during installation
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank youhillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you -
Update KB2952664 failed on 10-15-2014/ran mr fixit and it failed to fix problem/I'm running windows 7 64 bit. what can I do?
Hi LarBar,
Like Cyber_Defend_Team said, we need more information to help you analyze your issue.
Did your KB2952664 Windows Update fail to install? Any errors?
Have you tried this troubleshooting method?
Troubleshoot problems with installing updates
http://windows.microsoft.com/en-in/windows/troubleshoot-problems-installing-updates#1TC=windows-7
In addition, go to Windows update then click on View update history then click on Installed updates,
search for the failed kb number and double click on it and it will prompt to uninstall. Uninstall then
reboot and go back to Windows update and click Check for updates it should come up and re
download and install.
Karen Hu
TechNet Community Support -
I just updated firefox TODAY 8/17/11 and after the update i can't open firefox unless i restart my computer or i delete firefox going to windows task manager and process, also, i can't open a new window, it won't allow it. please help me, everything works on IE, Google Chrome and Safari, everything went wrong after the update
Hey Elaine07!
I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have OS X on both my iPad and my new iMac. I purchased Pages for my iPad and my husband's iPad at least a year ago. All of my stuff on the iPad is stored in the Cloud. Do I have to purchase it again on the iMac? How do I get it to run on the iMac?
attymot wrote:
Do I have to purchase it again on the iMac? How do I get it to run on the iMac?
You should also be able to access your docs (even without the Pages app on your iMac) by logging into iCloud.com and using the Pages for iCloud beta app via your browser.
(By the way your iPad uses iOS and not OS X) -
What do I need to do to be able to read and write files to a Seagate Backup Plus Slim Portable Drive on BOTH a Mac and a PC? I downloaded "Paragon NTFS for Mac" onto my Mac, so now I can write to the drive, but when I plug it into a PC it won't work.
If the HDD is formatted NTFS, then it suggests that there is a problem with the PC. Check with the manufacturer.
Ciao. -
Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau LeoHi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee -
I bought a scanner Fujitsu (model sv600) in which is delivered a CD of installation of Acrobat 11 for Windows. The problem is that I possess an iMac. How can it be done?
This page ScanSnap SV600 : Fujitsu Global shows that Acrobat is for Windows, not for Mac. There is no trade-up option so far as I know. Indeed, Acrobat Standard does not exist for Mac at all, only Acrobat Pro. Which you could buy.
Or, you can invest in Parallels Desktop which will allow you to run Windows apps on your Mac. -
Sun Java System Access Manager 7.1 config. failed during installation
{color:#0000ff}Hi,
I have installed sun java communication suite 5 on a single host on sun solaris 10.
I have installed required packages and it works fine.
But as per organization need, I have to change domain name.
So i have uninstalled everything and tried to install again with new domain name.
I have made proper entries in hosts file and resolve.conf file.
But duing the first phase of installation only , i failed in configuring access manager 7.1
I have also cerate same scenario in my test environment, but everytime i face the same error.
and sun java access manager 7.1 fails in first stage of installation only.
So would like to know the proper installation procedure while i change the domain name on same hardware...
I have checked both installation logs & summary logs.
But no error, no failed , no severe.
Attached is the summary of installation logs.
Summary Logs :
Installation Summary Report
Install Summary
Sun Java(TM) Communications Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
Communication Services Delegated Administrator : Installed, Configure After Install
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
Web Server installation Directory : /opt
Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 80
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : WebServer
Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
Access Manager Web Server Port : 80
Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : RADAGWMSG221.myreliancemail.com
Access Manager Console Port(for Existing console) : 80
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .myreliancemail.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : RADAGWMSG221
Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : o=rmail
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Sun Java(TM) System Messaging Server 6.3 :
Messaging Server Installation Directory : /opt/SUNWmsgsr
Sun Java(TM) System Communications Express 6 :
Communications Express Installation Directory : /opt/SUNWuwc
Communication Services Delegated Administrator :
Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
{color}Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane. -
TMG NIS definition files download but update fails during installation
Hi Folks,
Runnning Forefront TMG build 7.0.9193.500
When attempting to update the NIS definition files, the files download but fail to install and the following message is logged in the TMG alert section:
"Definition Updating Failed
Description: An error occurred during an attempt to check for, download, or install definition updates on the server ServerName.
The failure is due to error: 0x80240022"
When looking in the windowsupdate.log file, it appears that there is a permissions problem encountered during the update process (WARNING: ExtractUpdateFiles failed with 0x80070005)
Here are the full contents of the C:\Windows\windowsupdate.log file logged during the update process:
===========
Logging initialized (build: 7.5.7601.17514, tz: -0700)
===========
= Process: C:\Program Files\Microsoft Forefront Threat Management Gateway\UpdateAgent.exe
= Module: C:\Windows\system32\wuapi.dll
-- START --
COMAPI: Search [ClientId = Forefront TMG]
<<-- SUBMITTED -- COMAPI: Search [ClientId = Forefront TMG]
** START **
Agent: Finding updates [CallerId = Forefront TMG]
* Online = Yes; Ignore download priority = No
* Criteria = "(IsInstalled = 0 and IsHidden = 0 and CategoryIDs contains 'ae4483f4-f3ce-4956-ae80-93c18d8886a6' and CategoryIDs contains 'e0789628-ce08-4437-be74-2495b842f43b')"
* ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
* Search Scope = {Machine}
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
Microsoft signed: Yes
Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab
Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
+++++++++++
PT: Starting category scan +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
Microsoft signed: Yes
+++++++++++
PT: Synchronizing server updates +++++++++++
+ ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
* Added update {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100 to search result
Update {E27A995F-A0EC-4A58-8FCA-B8E190D68D27}.100 is pruned out due to potential supersedence
* Added update {72ABF509-5624-4520-A70D-BD25033E2423}.100 to search result
* Found 2 updates and 4 categories in search; evaluated appl. rules of 28 out of 35 deployed entities
END ** Agent: Finding updates [CallerId = Forefront TMG]
>>--
RESUMED -- COMAPI: Search [ClientId = Forefront TMG]
- Updates found = 2
END -- COMAPI: Search [ClientId = Forefront TMG]
-- START --
COMAPI: Download [ClientId = Forefront TMG]
- Forced: No; Download priority: 3
- Updates in request: 2
- ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
<<-- SUBMITTED -- COMAPI: Download [ClientId = Forefront TMG]
** START **
DnldMgr: Downloading updates [CallerId = Forefront TMG]
* Call ID = {4328BC7B-E197-42E3-BFF2-96BCCAA86280}
* Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 1, Proxy session id = -1, ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}
* Updates to download = 2
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 4.32)
UpdateId = {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100
Bundles 1 updates:
{8614B1DC-943B-425B-B995-9F0FCD2E961D}.100
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 11.39.0.0)
UpdateId = {72ABF509-5624-4520-A70D-BD25033E2423}.100
Bundles 1 updates:
{8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100
DnldMgr: New download job [UpdateId = {8614B1DC-943B-425B-B995-9F0FCD2E961D}.100]
* All files for update were already downloaded and are valid.
DnldMgr: New download job [UpdateId = {8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100]
* All files for update were already downloaded and are valid.
END ** Agent: Downloading updates [CallerId = Forefront TMG]
>>--
RESUMED -- COMAPI: Download [ClientId = Forefront TMG]
- Download call complete (succeeded = 2, succeeded with errors = 0, failed = 0, unaccounted = 0)
END -- COMAPI: Download [ClientId = Forefront TMG]
-- START --
COMAPI: Install [ClientId = Forefront TMG]
- Allow source prompts: Yes; Forced: No; Force quiet: No
- Updates in request: 2
- ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
- Updates to install = 2
<<-- SUBMITTED -- COMAPI: Install [ClientId = Forefront TMG]
** START **
Agent: Installing updates [CallerId = Forefront TMG]
* Updates to install = 2
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 4.32)
UpdateId = {A1395633-49F7-4A6C-AEE9-7166E952BCFD}.100
Bundles 1 updates:
{8614B1DC-943B-425B-B995-9F0FCD2E961D}.100
Title = Definition Update for Microsoft Forefront Threat Management Gateway (Network Inspection System 11.39.0.0)
UpdateId = {72ABF509-5624-4520-A70D-BD25033E2423}.100
Bundles 1 updates:
{8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100
WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
Preparing update for install, updateId = {8614B1DC-943B-425B-B995-9F0FCD2E961D}.100.
===========
Logging initialized (build: 7.5.7601.17514, tz: -0700)
===========
= Process: C:\Windows\system32\wuauclt.exe
= Module: C:\Windows\system32\wuaueng.dll
:: START ::
Handler: Command Line Install
: Updates to install = 1
: WARNING: Command line install completed. Return code = 0x8007000d, Result = Failed, Reboot required = false
: WARNING: Exit code = 0x8024200B
END :: Handler: Command Line Install
Preparing update for install, updateId = {8A1DD8C3-CF18-45BE-9F0D-68DBD4A53409}.100.
FATAL: Failed to copy file from C:\Windows\SoftwareDistribution\Download\57418eecd53e3e067a25056fe4892d0420c6ac8a to C:\Windows\SoftwareDistribution\Download\Install\mpips-fe.exe (hr = 80070005) after 10 retries
WARNING: ExtractUpdateFiles failed with 0x80070005.
FATAL: Failed to delete file \\?\C:\Windows\SoftwareDistribution\Download\Install\mpips-fe.exe (hr = 80070005) after 0 retries
REPORT EVENT: {F363E0CC-B0F5-4B28-8C27-631AC7CAD332}
2012-03-15 11:32:37:899-0700
1
REPORT EVENT: {336A98E0-0970-4297-B746-1A8A4B45F3CF}
2012-03-15 11:32:40:099-0700
1
END ** Agent: Installing updates [CallerId = Forefront TMG]
Triggering Offline detection (non-interactive)
## START ##
AU: Search for updates
<<## SUBMITTED ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
CWERReporter::HandleEvents - WER report upload completed with status 0x8
WER Report sent: 7.5.7601.17514 0x80070643 A1395633-49F7-4A6C-AEE9-7166E952BCFD Install 101 Unmanaged
CWERReporter finishing event handling. (00000000)
** START **
Agent: Finding updates [CallerId = AutomaticUpdates]
* Online = No; Ignore download priority = No
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
* ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
* Search Scope = {Machine}
>>--
RESUMED -- COMAPI: Install [ClientId = Forefront TMG]
- Install call complete (succeeded = 0, succeeded with errors = 0, failed = 2, unaccounted = 0)
- Reboot required = No
- WARNING: Exit code = 0x00000000; Call error code = 0x80240022
END -- COMAPI: Install [ClientId = Forefront TMG]
* Found 0 updates and 68 categories in search; evaluated appl. rules of 1058 out of 2009 deployed entities
END ** Agent: Finding updates [CallerId = AutomaticUpdates]
>>##
RESUMED ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
# 0 updates detected
END ## AU: Search for updates [CallId = {9BB9AE78-F80D-4236-AD77-8E261ABB97E0}]
No featured updates notifications to show
Successfully wrote event for AU health state:0
Successfully wrote event for AU health state:0
REPORT EVENT: {03FCFF25-6464-4C3E-A939-3E46A39BED6A}
2012-03-15 11:32:45:262-0700
1
CWERReporter::HandleEvents - WER report upload completed with status 0x8
WER Report sent: 7.5.7601.17514 0x80070005 72ABF509-5624-4520-A70D-BD25033E2423 Install 101 Unmanaged
CWERReporter finishing event handling. (00000000)
Since it seemed to help some folks that were having trouble downloading the NIS updates, I have also tried downloading the updates with (winhttp) Proxy authentication on and off.
I have also tried recreating the C:\Windows\SoftwareDistribution folder (Stop wuauserv; Rename folder; Start wuauserv; Folder recreated)
Still no luck. Any help or direction you can provide is much appreciated.
Cheers,
John
Hi,
Thank you for the post.
I did some research regarding error “0x80070005”, you may perform the following steps and see if it helps:
Step 1: Verify DCOM security
1. Click Start, click Run, type Dcomcnfg, and then click OK.
2. Expand Component Services, and then expand Computers.
3. Right-click My Computer, and then click Properties.
4. Click the COM Security tab.
5. Under Access Permissions, click Edit Default.
6. Verify that the following accounts are listed:
7. If any one of these accounts is missing in the Access Permission box, follow these steps:
a. Click Add, click Advanced, and then click Locations.
b. In the Locations box, click the Local_Computer_Name, and then click OK.
c. Click Find Now.
d. Press CTRL, click the required account names, and then click OK two times.
e. In the Group or User names box, click an account that you added, click Local Access in the Permissions for Account_Name box, and then click to select the check box in the Allow column.
f. Repeat step 7e for all the accounts that you just added, and then click OK.
Step 2: Verify DCOM default properties
1. Click the Default Properties tab.
2. Verify that the following configuration:
• The Enable Distributed COM on this computer check box is selected.
• In the Default Authentication level box, Connect is selected.
• In the Default Impersonation level box, Identify is selected.
3. Make any required changes, and then click OK.
4. Restart the computer.
http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e
http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/95edbee4-a75c-48ad-91d1-5316a96f9567
Regards,
Nick Gu - MSFT -
ORA-604 and ORA-4031 during installation of SAP
Hi,
I tried to install Oracle 10.2.0.2 on Windows 2003 with SAP R3E 47X2.
However, during the installation on the Database Load phases it pops up a ORA-604 and ORA-4031 error log. It was unable to completed the Database Load phase showed as R3 load jobs: running 1, waiting 0.
I tried to set the share pool in init.ora as shared_pool_size = 40000000. It still show up as shared memory issue.
The log shows as,
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: START OF LOG: 20081201110818
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Dec 15 2005 22:22:21
E:\usr\sap\IDE\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=604
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=15)
(DB) ERROR: DDL statement failed
(TRUNCATE TABLE "DYNPSOURCE")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201110858
Could anyone help me about it?
Thanks.hi Nikhuj,
I reset the installation and however endup the installation still have an error. Please help me to check with the following:
SQL> connect system
Enter password:
ERROR:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select ts#,file#,block#,nvl(...","Typecheck","kgghtInit")
SQL> show parameters shared_pool;
NAME TYPE VALUE
shared_pool_reserved_size big integer 12881756
shared_pool_size big integer 124M
SQL> alter system set shared_pool_size=40000000;
alter system set shared_pool_size=40000000
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04034: unable to shrink pool to specified size
As I had changed the parameter in initsmpl.ora shared pool from 10000000 to 40000000. The log as below was showing that:
SAPAPPL1.log:
Error accessing package DBMS_APPLICATION_INFO
Connected.
(IMP) INFO: import of LXE_PPX__1 completed (1 rows) #20081201200124
(DB) INFO: LXE_PPX__1~0 created #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=34)
(DB) ERROR: DDL statement failed
(CREATE INDEX "LXE_PPX__1~CNT" ON "LXE_PPX__1" ( "T_LANG" , "S_LANG" ,
"DOMATYP" , "DOMANAM" , "USAGECNT" ) TABLESPACE PSAPIDE STORAGE (INITIAL 0 NEXT
0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129
SAPAPPL2.log:
(DB) INFO: TCN2T~0 created #20081201200843
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "TCN41" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "PLNAW"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFIDNETZ" VARCHAR2(21) DEFAULT ' ' NOT NULL
, "FLG_ERF_H" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ESOKZ" VARCHAR2(3) DEFAULT ' '
NOT NULL , "EKORG" VARCHAR2(12) DEFAULT ' ' NOT NULL , "KSTAR_FRMD" VARCHAR2(30)
DEFAULT ' ' NOT NULL , "STEUS_WORK" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"STEUS_FRMD" VARCHAR2(12) DEFAULT ' ' NOT NULL , "STEUS_PRIM" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "KSTAR_COST" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"KSTAR_SERV" VARCHAR2(30) DEFAULT ' ' NOT NULL , "STEUS_SERV" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "DAUNE" VARCHAR2(9) DEFAULT ' ' NOT NULL , "ARBEH"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "WAERS" VARCHAR2(15) DEFAULT ' ' NOT NULL ,
"SLWID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "LVARI" VARCHAR2(6) DEFAULT ' ' NOT
NULL , "INDET" VARCHAR2(3) DEFAULT ' ' NOT NULL , "BUKRS" VARCHAR2(12) DEFAULT '
' NOT NULL , "AOB_KEY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "VORNR_DEL" VARCHAR2
(12) DEFAULT ' ' NOT NULL , "TERKZ" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AUART"
VARCHAR2(12) DEFAULT ' ' NOT NULL , "WERKS" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"DISPO" VARCHAR2(9) DEFAULT ' ' NOT NULL , "RSCHL_OFER" VARCHAR2(18) DEFAULT ' '
NOT NULL , "RSCHL_OFRD" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFER"
VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFRD" VARCHAR2(18) DEFAULT ' ' NOT
NULL , "RSCHL_OCST" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UCST" VARCHAR2(18)
DEFAULT ' ' NOT NULL , "GR_PRF_GR" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"GR_PRF_NAM" VARCHAR2(36) DEFAULT ' ' NOT NULL , "FHORI" VARCHAR2(9) DEFAULT ' '
NOT NULL , "NETSTUFE" VARCHAR2(6) DEFAULT '00' NOT NULL , "VAGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MSGTY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AOB_DARST"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "VRG_DARST" VARCHAR2(3) DEFAULT ' ' NOT NULL ,
"NO_DISP" VARCHAR2(3) DEFAULT ' ' NOT NULL , "COLKZ_ELEM" VARCHAR2(33) DEFAULT '
' NOT NULL , "COLKZ_TEIL" VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_MLST"
VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_DOKU" VARCHAR2(33) DEFAULT ' ' NOT
NULL , "COLKZ_MAT" VARCHAR2(33) DEFAULT ' ' NOT NULL , "VSPRF" VARCHAR2(21)
DEFAULT ' ' NOT NULL , "CLASF" VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFILE_ID"
VARCHAR2(30) DEFAULT ' ' NOT NULL , "BALK_PROF" VARCHAR2(36) DEFAULT ' ' NOT NULL
, "KBED" VARCHAR2(3) DEFAULT ' ' NOT NULL , "KKALKR" VARCHAR2(3) DEFAULT ' ' NOT
NULL , "LSTVAR" VARCHAR2(36) DEFAULT ' ' NOT NULL , "MATKL" VARCHAR2(27) DEFAULT
' ' NOT NULL , "MATEXIT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "EKGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MATKL_FRMD" VARCHAR2(27) DEFAULT ' ' NOT NULL ,
"EKGRP_FRMD" VARCHAR2(9) DEFAULT ' ' NOT NULL , "POSNR_MAT" VARCHAR2(12) DEFAULT
'0000' NOT NULL , "SCHED_END" VARCHAR2(3) DEFAULT ' ' NOT NULL , "SCEND_ACT"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "NT_SEARCH1" VARCHAR2(6) DEFAULT ' ' NOT NULL
, "NT_SEARCH2" VARCHAR2(6) DEFAULT ' ' NOT NULL , "NT_SEARCH3" VARCHAR2(6)
DEFAULT ' ' NOT NULL , "MFLIC" VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_FRMD"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_SERV" VARCHAR2(9) DEFAULT ' ' NOT NULL
, "KSTAR_MATVORPL" VARCHAR2(30) DEFAULT ' ' NOT NULL , "KZERB" VARCHAR2(3)
DEFAULT ' ' NOT NULL , "VALID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "VALID_VG"
VARCHAR2(21) DEFAULT ' ' NOT NULL , "SUBST" VARCHAR2(21) DEFAULT ' ' NOT NULL ,
"SUBST_VG" VARCHAR2(21) DEFAULT ' ' NOT NULL , "FPART" VARCHAR2(6) DEFAULT ' '
NOT NULL ) TABLESPACE PSAPIDE STORAGE (INITIAL 65536 NEXT 0000000040K MINEXTENTS
0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4040 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200843
SAPAPPL0.log:
(DB) INFO: PA0398~0 created #20081201200124
(DB) INFO: PA0399 created #20081201200124
(IMP) INFO: import of PA0399 completed (12 rows) #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "PA0399~0" ON "PA0399" ( "MANDT", "PERNR", "SUBTY",
"OBJPS", "SPRPS", "ENDDA", "BEGDA", "SEQNR" ) TABLESPACE PSAPIDE STORAGE (INITIAL
0 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129 -
XI PCK 3.0 fails during installation
Hi,
during the installation of the XI PCK Version 3.0 the installtion fails with an error.
Here is a dump from the installtion log:
05/03/10 11:07:25 - ERROR: Not deployed. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.xi.mdt..
Reason: Cannot parse ejb-j2ee-engine.xml.; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBXMLParserException: Cannot parse ejb-j2ee-engine.xml.
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:477)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.engine.services.ejb.exceptions.deployment.EJBXMLParserException: Cannot parse ejb-j2ee-engine.xml.
at com.sap.engine.services.ejb.deploy.xml.InqmyEjbParser.parseXml(InqmyEjbParser.java:86)
at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:334)
at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:252)
at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2057)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:594)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:365)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:296)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:290)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:321)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3028)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:462)
... 10 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7) -> com.sap.engine.lib.xml.parser.NestedSAXParserException: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7)(:main:, row=1, col=7) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:7)
at com.sap.engine.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:131)
at com.sap.engine.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:117)
at com.sap.engine.services.ejb.deploy.xml.InqmyEjbParser.parseXml(InqmyEjbParser.java:81)
... 20 more
For detailed information see the log file of the Deploy Service.
Is there really a bug in the ejb-j2ee-engine.xml - File ?
Did anyone have similiar problems ?
Any help is greatly appreciated.
Cheers,
FrankHi Frank,
we also have encountered this problem.
This the problem with the XML File. XML File is not properly formed.
You have to search for the mdt.sda file becuase during installation it hangs up during the deployment of mdt.sda file and then you can look for xml file in at mdt.sda file.
This problem comes because of the SPACE are there in the XML file.
This would resolve your problem.
Regards,
Alok Sahu
Maybe you are looking for
-
I am using FaceTime to look in on a meeting being held on the other end, but I don't want the people on the other end to be able to see me. Is there a way to disable the camera while watching on FaceTime on my MacBook Pro?
-
How to insert new line character?
Hi all, I have two lines to print. out.println("Available number of columns="+cols); out.println("Number of columns must be present=10");My problem is: i want both the lines to be printed one below the other. But, it is displayed in one single line..
-
I've tried downloading this sowftware update but it says it needs version 10.7.3 Nothing seems to work, Please help.
-
I have two iPads on one account, I deleted three documents from one of them and they have disappeared from both and aren't in iCloud either, can I retrieve them?
-
I just had to restore my iphone 4S from backup and lost over 100 pictures. Is there anyway to get them back? Please help!