Bottom of text box is "stuck" to footer

I've used text boxes of different widths on a page. The latest entry was in a long narrow text box, with photos alongside (outside the box). Now, when I want to add another entry with a wider text box, I am unable to detach the bottom of the existing text box from the footer. I can't get any space below it, in order to insert a new wide text box. I was able to "roll it up" part way, eliminating some empty space, in iWeb, but it remains stuck to the top of the footer.
The page is http://web.mac.com/akantha/Sightlines/CanineChronicle2008.html
Thanks for any suggestions.

You have a big empty space at the bottom of your page. Is this the problem?
Your page is very long. Have you thought of increasing the width and decreasing the length?

Similar Messages

Keyword Text Box Gets Stuck

I was importing larger sets of images (about 200) and keywording them (mainly
names of plants). This went all very well, until I noticed that the keyword(s)
shown in the text box of the keywording panel (RH side) did not change anymore
when I clicked on images I had already done. I knew they had been given
different keywords, and I could see different words highlighted in the recent
keyword list below as I jump from image to image. Somehow the display of the
text box gets stuck after a while, and I need to exit LR and come back in.
Anybody had a similar experience?

Yes, I have seen this behavior also. When doing a lot of work jumping around between various images in the grid view, it seems to me that eventually LR gets into a state where even though visually the appearance of the grid changes to indicate what's currently selected, internally LR hasn't really changed the selection. This can actually be very dangerous. For example, I have now on 2 different occasions selected an image and punched the Delete key only to have a different image than the one highlighted in the grid actually get deleted. (The confirmation message that LR displays is no help, because it doesn't tell you the name of the image you're about to delete!) Fortunately, I was able on both occasions to rescue them out of the recycle bin and re-import. This is a very serious bug, and, like you, the only way I've found to work around it is to shutdown LR and restart it.

How can I make the Counter move from inside text box to inside Footer?

I am tweaking a page. At this point, I cannot move the Counter and the Email Me icon from the bottom of the text box to inside the footer like someone here said he does.
Why do the Counter and the Email Me icon resist being moved?
I am in Graphics mode. I never had this problem before.
— Lorna in Southern California

Lorna,
I'm not sure why you can't move it down into the
footer — by inside the text box, do you mean the page
"content" or "body" section, or did you somehow get
the icons into a text box? I know that you can
"force" a text box into the footer (or header) by
selecting it, then dragging it while holding the
command (Apple) key down at the same time.
Hope this helps.
Bob
Bob,
When I say Text box maybe I am not using the right word. I am referring to that entire space on the page which is dedicated to receiving documents or images. If you have a lot of pictures or words, then that text box/space has to be lengthened to accomodate.
I am saying that the two icons -- Counter and Email Me -- are sitting (or were sitting. It's morning now and honestly, I can't recall from last night!) at the very bottom of the text box/space.
I made a Footer (55 pixels) specially to accomodate the Counter and Email icons. The problem, as stated, was/is that those icons would not budge from where they were sitting.
— Lorna in Southern California

How can i pin a text box to the bottom of a VBOX

Hi,
Thank you in advance for your time, the question is how do i pin a text box to the bottom of a VBox, i dont know what code to add kindly help me out. The code i have with me is
VBox {
translateX: 10
translateY: 10
spacing: 20
content: [
Label {
text: "TextBox:"
TextBox {
layoutInfo: LayoutInfo { minWidth: 100 width: 150 maxWidth: 200 }
] //contents
//VBox
now the text box has to go to the bottom of the VBox even if the VBox has other objects or if its resized.
Regards,
Kibu

Vbox, acts much like a linear layout like in other languages.
Just keep your declared textbox at the bottom of your content (content :[] ), then the text box will continue to get pushed further down your view, as you add other controls to your content.
layoutX and layoutY will just increase your spacing from the previous declared control in that content.

HT202879 how do i add a line to the top and bottom of a text box only

i have a text box in my Pages document but i need to be able to add a line tot he top and bottom only to my text box. can i pleae get some help.

Hello alegna23,
To add a line just to the top and bottom of a text box, you will need to add the two lines as shapes. Follow the steps below to add a line to your document:
Add a shape
Click Shape in the toolbar.Click the arrows to see more shape styles.
Select a shape to add it to the page.
In step 2, select a line and use the squares on the end of the line to help resize the line. You can find the full article here:
Pages Help for Mac - Add and edit shapes
http://help.apple.com/pages/mac/5.0/#/tan9ad18c384
Thank you for using Apple Support Communities.
Best,
Sheila M.

UDF text box in bottom section

Can I add an UDF to fit 260 characters (I tested system only can fit 254) text box in the bottom area for "Remark" use not same comments?
How to populate UDF in SO or PO for this UDF not in Row or Title area?
Besides UDF "Remark" will need another Text Box to fit 440 characters in the bottom area as well. This is user's request for their business.

I added my text from GoTo>Opening and Closing Remarks that can fit enough characters. Very useful.
Edited by: Lily Chien on Feb 8, 2009 10:06 AM

Edit in Text box at bottom of Numbers sheet?

I'd like to know if it is possible to edit cell content in the TEXT box at the bottom of a Numbers sheet. I'm attaching a screen shot so you can see what I mean.
In Excel, there is a formula bar near the top of a sheet that allows this, and it's really helpful. This box is the closest thing to that I can find in Numbers.
If Numbers has nothing similar, why do cell contents show up in that box if you can't do anything to them? It would be much easier to make the changes in that box--which is pretty large--than in the cell itself. And if it does exist, putting it at the top of the sheet would be helpful.
Thanx for answering.
⍋
Here's the box I'm referring to.

Hi Jane,
No, you can't edit the display at the lower left of the window.
Click twice in a cell to see the edit box and edit the formula in that box:
The edit box can be dragged around by the grey dot on its left, and expanded by dragging any side:
I often find it handy to copy the contents of a cell and paste to the canvas (it will become a Text Box) for a clearer view:
Regards,
Ian.

Copy is breaking to next page and not flowing to the bottom of the text box

I have a document where text is styled with style sheets and overrides are cleared but the text breaks to the next page rather than flowing to the bottom of the text box. I've had this issue several times in the past but have never figured out how to correct the issue.

Thanks for the suggestion. I have invisibles showing but I'm not seeing a Word break character. Do Word break characters show up in ID differently from ID break characters. I'm attaching a screenshot to show what I'm dealing with.
I made sure the keep options are completely unchecked.

How do you get rid of text boxes that get stuck on the form?

When in "View Responses" there is a text box that says "Manually Added" stuck no matter where I scroll. Its actually happened 3 times so now there are 3 "manually added" text boxes stuck on view responses - which is becoming an issue as it hinders being able to see what is actually in the responses. I have to resize the responses to get around them. Other people on my team are having the same issue. Can someone help?

I am using Firefox. The boxes show up no matter if I sign out and sign back in or not and flash has been updated and it still occurs. I've attached an image to show you what it looks like. I've minimized my form to show that the box continues to stay in place. (My form is a lot longer than what screen capture allows me to show and there are more randomly placed text boxes further down the page.)
Nicole Atkins I Quality Control Coordinator
Fanatics, Inc. I Box Seat Clothing Co.
“Providing the ultimate shopping experience to sports fans.”

How do you put rules around a text box ina pages layout template? The inspector tab seems to allow rules on top, bottom or both, but not on all four sides.

How do you two format facing pages to appear as a single page for a photo spread?

It seems you have one question in the title and another in the post.
1. Select the text box. In the Inspector palettes Graphic tab choose Stroke. You can chose Line or Frame.
2. See this discussion Double Page Spread?

The kerning tool appears to be stuck? Cannot make any changes to text boxes in new or existing files

When I try to adjust the kerning in any text box, whether it be in a new or existing file, the change will not take place. It will just automatically return to either the default. Please help!

Thanks, perhaps this might help. as you can see the kerning is set at 300 which should make the T/E very far apart they aren't. The "after" shows the kerning set at (0), even though I made the change to 300. The cursor is in the correct place, even though it doesn't appear on the screenshots.

Recorded an Assessment and it get stuck at text box entries

Hello,
I am using Captivate 3 and have been sucessful in recording assessments in the past. I am currently recording a tutorial on how to add pictures to a word document, resize, crop and title and comment on the picture. The tutorial has what I call a "show me" then a "try me". The demonstration (show me) works great. The assessment (try me) I am recording directoy after the demonstration includes text box entries and this is the first time one of my assessments included those and they seem to be my issue. First "interesting" thing that happened was that the text entry boxes spaned over the width of my project so I had to shrink them down to the targeted area. Once I have them in the correct area I and I run the project, everything works beautifully until I get to the text entry boxes. I am able to enter text...but that is it. I can't move forward or click anywhere else.
I am attaching screen shots...not sure it will help.
First screenshot is the first text box entry. where the words Living room need to be typed.
Second screenshot is the next slide where I thought I should be able to move down and place an X next to Paint All. BUT as you can see I shifted the text box a bit and there is no evidence of the words Living Room.
Third screenshot is where I shifted the text entry box up slightly to see only the word living is available BUT it looks like it now wants me to click next to paint all..but at the same time waiting for the word room to populate. (Gosh I hope this makes sense)
The last screen shot is showing the full text entry of Living Room and now looks like it wants me to check next to Paint All EXCEPT I can't get past the first screen shot.
Thanks in advance and much appreciation any thoughts anyone can lend in sorting this issue out.
Sherrie

It is not very clear on your screenshots, but it seems to me that in the first screenshot the Text Entry Box is inactive right from the start (looked at the timeline). Same for second and fourth screenshot. Only the third one seems to have an active region for the TEB. An interactive object that is set to inactive, I believe you cannot have any interactivity. Could you check?
The entry in a TEB has to be confirmed: either by a Submit button (is not there) or by a shortcut (default is Enter). What did you choose?
You spoke about TEB spread over the entire project, that could mean that in the tab Options of the Properties of this TEB, the option 'Display for entire project' was activated in the Timing. It is here that you can change the timing, and the active/inactive time period.
Perhaps this was the explanation you needed?
Lilybiri

Help! Odd text box behaviour in IE compared with iWeb 08/Safari.

Hello All
I have been tasked with building my girlfriend a website so have fired up iWeb and got stuck in. It all looked fine and dandy to me in iWeb but she is complaining that when she views it on her PC using IE one text box is messed up. In iWeb I centered the text both horizontally and vertically within the text box but IE shows the text at the bottom of the text box and hence loses some of the text.
I'm wondering if there is a work around for this to make the site look the same in IE?
Thanks

Jonno,
Make sure nothing else is touching the textbox on the iWeb page. You can click on any element on the page to select it, then use <select all> (command A). This should allow you to see all the boundary boxes for all the elements on the page, make sure none of them are touching the problem text box.
Also make sure the textbox isn't touching the edge of the page or the header , or footer or anything. Make sure there is space all around the box.
If you post the address to the page others can more easily help you.
Sincerely, David

Making a text box expand as you type into it?

I was wondering if it is possible to make a text box (or any kind of box) expand as you type into it. Currently the box does not have a caption, I simply want to allow the value box to expand as i type into it. It would also be great if it would expand to another page...does anyone know if this is possible and if so how can i do it?

Any help would be greatly appreciated and, yes, that is a mess x about 17.   The good news is I didn't design it -- the bad news is I got tagged to try and fix it.
I'll try to answer in order:
You haven't used any subforms so it's not going to work as-is.
                    I don't think whoever did the initial form knew about the subform issue so no provisions made for them.
I won't have time to look at it closely until tonight. Some questions/comments in the meantime:
Do you really need 2 master pages - does that block need to be at the bottom of each page? Or is it just supposed to follow everything else.
                     the information is to be on the bottom of every page -- clients/workers need to sign each page to prove they have read the information
You've used tables to do a lot of the layout - probably not a good idea.
                              if we need to dump the tables, that's fine - I looked at the 7_Questions_Flowing.pdf from another thread and I can make it work
                              the way it needs to with the information in a header but they WANT it as a footer.
You've made the Content Area the full size of the page, better to size it what you want your margins to be.
                                ok, that should be the easy fix of the batch
You have no master subform (or any at all for that matter...)
                             my problem was I couldn't find a way to add a master subform that didn't give me that message. If I couldn't get that
                              one to work without the error message then none contained within would either ??

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

Bottom of text box is "stuck" to footer

Similar Messages

Maybe you are looking for