Bottom round pad beneath square not updated according to design rules
I saw this problem with the last couple of sets of boards I ordered so I decided to track it down.
It turns out that if you have a throughhole component with a square pad on top and a round pad underneath that the round pad doesn't get updated according to design rules even though that is checked in the pad properties.
I was using the DIP8300 and DIP14300 footprints from the master database and I set up PCB design rules to set the annular ring to 100% of drill-radius so I could actually see some pad to solder to. This works perfectly for all the pins except pin 1 and it even works there on the top layer. If you go in and manually select that pad and look at the copper bottom layer, you can see that the annular ring hasn't been resized though. If you change the shape to square or rounded square and change it back to round, it updates from the design rules properly.
This is in v.11. Not sure if this problem is still there in 12 ...
Mike
Hi Mike,
I was able to re-produce the issue. Thank you for bringing it to our attention. I will report it to R&D.
Regards,
Tayyab R,
National Instruments.
Similar Messages
-
My IPad 1 will not update apps. When I attempt to update, it tells me I have no more space available and to manage my storage in settings. In settings it says I have 4.8 out of 5.0 gigs available. So why won't the apps update?
Yes I have viewed the other threads regarding similar issues. No they did not apply to this issue.
TyIn settings it says I have 4.8 out of 5.0 gigs available.
I believe this is the free space you have in iCloud. How much free space on your iPad?
Go to Settings>General>About>Available
Cheers, Tom -
Exchange rate in PO not updated according to OB08 definied
I have a problem to retrieve the updated exchange rate, I defined the exchange rate in M exchange rate type from time to time, but when I create the PO, it always used the old exchange rate, is the exchange rate configuration only uses OB08 and OB07? did i miss anything else? please advise!
ElaineHi,
This is related to SD query. pls put in Sales & Distribution blog and get immediate reply.
Anil -
Tabular model does not update accordingly with source data chage
Hi all ,
I am new into Tabular, appreciate if someone can help please.
I've created a simple Tabular model against a single table (SQL Server 2012 ). When I process and deploy I can open it on Excel and view data.
Then when I change data in the source table, and process and deploy the data, the changes does not reflect when open in Excel, But If I give different Database Name and Cube Name under Tabular Properties and process and deployed, and open in Excel I can
see the changes.
I want to keep the same Database and Cube Name under Tabular properties/Development server.
Is it possible to see source table changes in Excel, if I didn't change Database and Cube Name under Tabular properties/Development server.
Deployment Options are as follows:
Processing Option : Default
Transaction Deployment :False
Query Mode: In Memory
Thanks.
MiraHi,
Try by changing the "Processing Option : Default" to "Processing
Option : Full". Sometimes I delete the workspace database created in SSAS server before do the processing.
Best regards.
Chandima Lakmal Fonseka -
Hi,
Issue with few accounting documents were not updated with hard currency due to hard currency is not mapped at the time of posting and exchange rates is not updated accordingly.
Could you please let us know do we have any alternative option to post the hard currency which was not updated accounting documents with out reversal.
Regards
sangeethaHi,
Use t code F-05 . Enter the amount only in hard currency , in local currency & Group currency enter zero amount.
PK
Doc.Curr
Loc.curr
Hard.Curr
70
0.01
0.01
59.01
75
0.01
0.01
0.01 -
MY I pad 1 is not updateing....in software update option it's shows iOS 8.1 are avelabal but when I star download the massage is blink an error ocupide ........pls help me toupdate my I pad.!
What Niel said. However, an iPad 1 should not even be aware there are any updates past 5.1.1; where are you seeing this notice, in iTunes?
-
Lync for Mac 2011 does not update Presence properly.
Hello all,
I work in a Enterprise environment, we run Active Directory and bind our Macs to the domain. We use Lync for Mac, and I've noticed that on the Mac clients, the user status does not update accordingly. When my users are in a conference call, it shows
available, etc. It works fine on a Windows machine with that same user.
If the event is on the Outlook calendar, sometimes it will show them as away during that time period, but it does not seem to update when on the phone/in a meeting, etc.
Any advice would be appreciated, my user is on Mac OSX 10.9.3 and Lync 14.0.8.
Thank you,
MichaelWe are seeing the exact same thing at our company. A hundred or more Macs all with broken presence.
Its issues like this that have us looking at Jabber now - Cisco doesn't seem to have buggy OS X software like Microsoft. That will be 40,000+ seats lost due to this and other issues. Maybe if enough hit MS in their pocketbook
they will start paying more attention to Macs.. or at least test them before rolling out software.
Note a few things regarding our setup:
1. Our Lync is on-prem 2010 and 2013 mix
2. Our email is in 365
3. We are using ADFS and FIM for SSO, Dirsync.
4. We do not domain join our Macs. (back when Lion wrecked all our domain joined accounts we stopped with that foolish practice)
It worked with previous versions of Lync 2011.
It works for zero Lync 2011 users. Lync 2013 on-prem domain joined machines work. We see the same thing where a Mac users also logged into 2013 on a Windows machine will help update the Lync 2011 client... but its not an acceptable work-around.
I suspect its having difficulties with the external cert. -
My i pad is not responding. I have a security copy in my iTunes. But my iTunes is not updated. Will i lose my Security copy?
I have an iPad 1 as well that I updated when the iOS was first released a few weeks ago and I think that the new update really sparked my iPad into "new life" again. It's so hard to tell what will happen when you update - ideally the performance of the device should improve - and not fall off.
Have you tried closing any/all open/running apps in the recents tray? Close them all and restart - see what happens.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
So, my IPod touch is running 5.1.1 and is slow and sometimes unresponsive. According to Apple it will not update to iOS 6. It is a 32GB, 3rd Generation. I want the new features but it's making me mad. I do not want to jailbreak. As this would void my device from Apple. I love the features iOS 6 has to offer but I don't want to put out anymore money. IPods are expensive enough, Should I use blobs? Or would that make my device worse. Plus I do not want to pay $20.00 for a chat and have to wait all day to someone who I can't understand on the telephone. someone help me please.
For the slowness:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?
The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ... -
Why will my I pad not update to the latest iOS version for uploading apps
Why will my I pad not update to the latest version of ios for apps
Hi 245 yorkland,
If it is an iPad 1, then the highest it can go on iOS is 5.1.1
Cheers,
GB -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I PAD RETINA DISPLAY NOT ABLE TO BROWSE AFTER UPDATING TO IOS 8.0.2
i am facing the problem in my i pad retina display after updating to ios 8.0.2
I pad is not able to check for updates even. plz help.Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
HT3204 heloo, i updated my i pad it is not installing
heloo, i updated my i pad it is not installing
provide details - with what you have given us to work with the only suggestion is to fix the problem
what version of iPhoto do you have installed (in your applications folder select iPhtoo and get info)?
What version of the OS (under Apple menu ==> about this Mac)?
What does "not working " exactly mean?
LN -
Why can I not update apps on my I pad
Why can I not update my apps on my I pad
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Team members are not displaying in Team Calendar
For some employees.... Team members are not displaying in Team Calendar in Portal what would be the problem Could you please resolve this Its very urgent Edited by: Kumar.saphr on Aug 18, 2011 9:38 AM
-
Hi Experts, I have configured LDAP with LDAPAUTHENTICATOR as Provider. I set it as sufficient and tried to restart server. But the admin server is not starting and it is giving error as shown below in the logs, JPS-02597: You configured a custom Auth
-
ORA-29857: domain indexes and/or secondary objects exist in the tablespace
I tried to drop tablespace APPS_TS_TX_DATA using drop tablespace APPS_TS_TX_DATA including contents and datafiles cascade constraints. I got error ORA-29857: domain indexes and/or secondary objects exist in the tablespace. After I have dropped all do
-
What is iMessage error code:0732-3334-3378?
What is iMessage error code:0732-3334-3378? Does this mean that iMessage is not supported on my late 2008 MacBook?
-
Giant increase in backup storage
I had an older macbook pro that when my external hard drive was backing up my files, only backed up a max of about 15 gb. I recently got a new mbp and restored my older mbp on that one, so I currently have my old mbp as a user as well as the new user