Botton video on menu gets pixelated and pulses when burt DVD is played back
Created a menu with buttons that contain video from the same asset it plays. They were HD mpegs that were converted to SD for the project. When viewed in simulator, everything looks fabulous. However, when I burn the disc and play it back on a laptop, the video in the button looks really compressed and has a weird pulse. Note-The target track plays fine. Can anyone help?
Created a menu with buttons that contain video from the same asset it plays. They were HD mpegs that were converted to SD for the project. When viewed in simulator, everything looks fabulous. However, when I burn the disc and play it back on a laptop, the video in the button looks really compressed and has a weird pulse. Note-The target track plays fine. Can anyone help?
Similar Messages
-
Why iphone get on and off when battery is good
why iphone get on and off when battery is good
iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for this
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music
Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.
-
I'm trying to use quicktime on my macbook pro but I receive the message below when I make an attemp to use it. Any suggestions?
Media formats supported by QuickTime Player
QuickTime Player natively supports the following media formats and codec components. You can also extend QuickTime to support additional codecs and components.
Below are the media formats and codecs that QuickTime Player can play back in Mac OS X v10.6.x or later:More alternatives to Quicktime. VLC is recommended a lot.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC -
I'm getting a 42110 error when I try to play my rented movie from the istore. I've downloaded the movies twice but it's saying they aren't downloaded !
Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.
When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
How have you listened to those bounces? iTunes? Quicklook? Quicktime? -
I unplugged my usb without ejecting it and now when i plug the device back in it won't see it
i unplugged my usb without ejecting it and now when i plug the device back in it won't see it
Click on the desktop, then go up to the Finder menu > Preferences... > Sidebar > and check all the boxes under Devices.
-
how can I easily video screen capture my interactions on an ipad2 so I can play back to demo content I have created?
Hi,
Thanks for the response but I know how to do a screen capture but wanted to be able to capture myself interacting with the ipad ansd turn into a movie i.e. showing all the movement / animation etc as I interact.
I have now figured out a good solution. Using AirServer you can wirelessly connect you ipad to your mac/pc then using a video capture solution like Snapz Pro you can capture what you are doing to create the video.
Cheers -
Recently when I try to play a video on Firefox I get the same message that I need to download the latest version of Adobe Flash Player. At least 5 times I have downloaded Adobe Flash Player 11 Active X and Adobe Flash Player Plugin 64 bit. Problem is that even though I have the latest version I still get the same message when I try to watch videos on Firefox. The frustrating thing is I can watch videos on Internet Explorer and Google Chrome as well as on Safari. How does that make sense?
Today, I upgraded to Firefox 10.0.2 (x86eng-us) hoping that would enable me to watch video on Firefox but it made no difference either. I would rather use Firefox as my default browser but if I can't get help so I can view video on it I will be forced to use another browser.Hi arpriltime,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
Hopefully this helps! -
Previews in Bridge get pixelated and discolored after adjustments?
Hello, I'm using Bridge 5.0.1.23 x64 via Photoshop CS6. I'm processing some low-light nighttime photos that require me to boost the "shadows" slider most of the way to the right to get the look I need. After doing this, I've noticed that the previews in Bridge look pixelated and purple in all of the shadow areas.
Is there a way to solve this?
Screen shot attached. It makes the previews nearly worthless.I don't see that option. Here's what the "Thumbnail" tab of my options looks like:
The thumbnails do show the same weird color effects, but I'm far more concerned with the previews than the thumbnails.
Other settings that seem like they might be relevant:
"Keep 100% Previews In Cache" is checked (under Cache tab)
"Generate Monitor-Size Previews" is checked (under Advanced)
"Preserve Embedded Color Profile" is checked (under Output)
Thanks for troubleshooting with me . . . -
The navigation menu gets jumbled and I need to restart Firefox
After I use Firefox for a period of time, the navigation menus get jumbled and words within grids in some applications overlap.
I have emptied the cache and still the problem persists.
After I close Firefox and reload, everything works fine until some resources is reached and the jumbling begins. I have a 4gb high-end laptop.
I currently have Firefox 12.0
I can provide a screen shot but I don't see an upload capability in this forum.Did you try to disable all extensions to verify that it isn't caused by one of the extensions?
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available" -
Why do I get a no plugin when I need to play some videos
Sometimes I get a message no plugins and cannot view videos how can this be rectified
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
I updated quicktime a few days ago and now I keep getting error 2048 whenever i try to play back my Maya file after saving it as a qt movie. I had no issues with this before I did the update, after the update I keep getting the error 2048 message. QT will play my earlier Maya movies and other video, it just won't play back my latest work. Help me please, I need this for school.
The 2048 error message usually suggests the files use MPEG-2 format which is not supported natively on Windows via QuickTime without the additional MPEG-2 Playback Component ($20 from Apple).
-
E66 get hanged and restarted when selecting any th...
Hi friends,
I just purchased E66 3 week ago.
Its just awesome phone.
But when I tried to change theme from Grey to White steel directly without preview it gets hanged and restarted.
Anybody having this type of problem?
let me knowIn the search window, if you can, search for "com.apple.finder.plist". Trash it, and restart.
If you can't do it, put your machine in Target Mode, and connect to a buddies machine. Search for, and remove, that same file.
Maybe you are looking for
-
I have an old apple id that has a number of songs on it that i want to transfer to my new apple id. it keeps asking me to authorize the old id but i have no password and the email is no longer. thanks
-
How can I make slides NOT advance automatically?
I'm building a project manually by making new slides and putting graphics and text on them. It's not a recording of software. I would like the user to read each slide for as long as they want to, then click to go to the next one. I can't find a se
-
Hi, I am having a little problem with java. When I try to compile code I have to type the whole path to where the javac compiler is.(by the way, I'm using linux) /usr/java/j2sdk1.4....you get the idea. I tried looking in the java tutorial and the box
-
Lion Install will not allow me to use my Mac HD
I managed to download Lion last night using the App Store. Tried installing, I can't get past the "Select the disk where you want to install Mac OA X window. I only have one partition, 100% MAC, screen states "499.76 GM Total . 350.22 GB availabl
-
Hi I created the project with DSC (LV 2010). Then I created the Installer. After I Installed this project on another PC (Win XP) without error. And when I run my project on another PC I have the ERROR. I added the Error. Where is my Error? Regards Is