Bought a used imac but its locked by old username and password

bought a used imac but its locked by old username and password

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Similar Messages

  • I am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    i am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    You can likely download the last compatible version by:
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Hi I bought an iPhone from my friend who forgot the username and password, and now my iPhone Aktyvyshn code and that it wants to register Forgot your password to her email, please guide me

    Hi I bought an iPhone from my friend who forgot the username and password, and now my iPhone Aktyvyshn code and that it wants to register Forgot your password to her email, please guide me

    You can NOT do so. Only the owner of the account used to lock the phone can remove it. Instructions for how to do so can be found within or linked from within the document I already linked to.
    Activation lock is an anti-theft feature designed to make the device useless to anyone other than the rightful owner.
    If your friend refuses to give your money back and can not or will not remove the activation lock, there is a fair possibility that the phone was not theirs to sell in the first place.

  • I downloaded firefox. I want to use it to make phone calls etc but do I need a username and password?

    This is my first use of firefox. I downloaded the firefox as on internet. I tried to use the hello phone but to no avail. Do I have to fill out a form with username and password? What else?

    Sorry, Hello is not for making "phone calls", as such. It is a browser to browser form of video / audio "chat" communication, using the WebRTC API.
    http://www.webrtc.org/home.
    https://blog.mozilla.org/blog/2015/01/13/firefox-hello-makes-connecting-by-video-as-simple-as-in-person/
    https://support.mozilla.org/en-US/kb/firefox-hello-video-and-voice-conversations-online
    https://support.mozilla.org/en-US/kb/which-browsers-will-work-firefox-hello-video-chat

  • Can I use a stored procedure to validate a username and password?

    We are using Discoverer on a standalone server but we have a database link to our reporting database.
    Our standalone Discoverer is on a 10g database with a database link. Our reporting database is an 9i database using oracle applications. I have a stored procedure that i can call to validate username and password in the apps.
    Is there anyway to call that stored procedure from Discoverer so that my users don't have to have 2 different passwords?
    thanks
    Angie

    Michael.
    Let's rewind this discussion for a sec as I have not the faintest idea what you're referring to with the dblinks, query prediction, etc.
    I didn't think that was the main thrust of the thread and thought it was if the user could validate a username and password. If they happen to use a dblink, that's another issue.
    1. What I"m referring to as good design is the concept of the eul$ triggers that Discoverer offers (the link offered by the user before my response).
    I like triggers in Forms, I like trigger in Reports - and I like them in Discoverer. I think they potentially have a great use - the problem is finding that use.
    One use I can forsee is setting up an environment or table everytime one enters Discoverer. Or maybe some cleanup after Discoverer is exited (ie: delete that setup table).
    2. You mentioned dblinks.
    What do I think about 'em? Don't know ... don't care. Haven't had to work with them too much and until that point comes - I'm not worried about them either way.
    3. You mention query prediction.
    What do I think about it? IMO, turn the darn thing off. I don't really care what it's SUPPOSED to do according to Oracle - in 9 out of 10 client sites I go to ... it's not doing it. It's waste time, processing power, coffee time, whatever ... to come up with a bogus estimate that makes Discoverer looking like a toy.
    For example:
    prediction time: it takes 6 minutes to come up with an estimate
    prediction: Query will take 364 days, 11 hours, 9 minutes, 18 seconds. Do you wish to continue?
    me: Duh ... okay.
    query runs for: 1 minute, 2 seconds
    It's like a Vulcan in that it's incredible detailed on it's assessment on how long it will take. Unlike a Vulcan though, it's completely bogus. Sure it supposed to be better over time but again - in 9 out of 10 client sites I go to, it's a joke and once turned off ... the client couldn't be happier.
    So again, let's rewind here. Maybe I'm missing something, but I had no idea this thread was angling to dblink and query prediction, but my views on what I thought we were talking about are above.
    Russ
    PS. And no I'm not PO'd ... just want to fix what appears to be cross-purposes.

  • I have changed my username and password but the apps are still asking for my old username and password. How do I change that

    I have changed my username and password for my apple account but the apps previously linked to it are still asking for the old info. And I don,t know it so that's why I updated it

    Apps are permanently tied to the ID and password used to purchase them. If you do not remember that information, you cannot update them. If you ned these apps, you will have to repurchase them under your new ID.

  • I just got a new phone and I'm trying to use iMessage but its not taking my apple id password

    i have my new phone and it has all my pictures an contacts and I've been putting in my password but the only apps that arnt taking it is my FaceTime and imessage

    Especially check Settings > General > Date & Time and make sure your time zone is set correctly.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support

  • I recently bought a used iMac with OS X 10.6.7 and I can not get to the adminstrators account. I do not have the OS disc. Any help is greatly appreciated.

    How can I reset the Administrators password to create a new one?

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you are unable to boot from an installer DVD:
    (these will only work on Leopard or earlier)
      1. Boot to Safe Mode by restarting and after the chime press and hold down
          the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each
          command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command
         until you do.  If after seven tries you still do not receive a "Filesystem OK"
         message, then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    Reset Admin Password Using The Terminal
    You can reset the password by printing out (or writing down) and carefully following these steps.
    First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
    Now, start in Single-user Mode. It should boot into a command line.
    Enter these exact lines. Press RETURN after each.
    mount -uw /
    ifconfig lo0 up
    cd /var/db/netinfo
    netinfod -s local
    Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
    The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
    Now, enter:
    sync
    reboot
    and the machine will reboot. The admin password should now be changed.

  • Using a guest wi-fi network with changing username and password

    I am trying to access a "guest user" wi-fi network at my office. For security purposes, the guest network username and password are changed periodically. The connection worked fine until the username and password changed. Is there any way to access the setup of a specific wi-fi network on the iPhone and update the user name and password? I would like to be able to do it without resetting ALL the networks used?
    I tried to use "Forget Network" and then restored the connection, but it appears the iPhone retains the old username and password in memory.
    Thanks!
    liv3itup

    Well, I tried to duplicate what you talked about. I have my wireless here at home, and I chose, "Forget this network" and when I went to rejoin, it asked for a password. Many public networks take their username and password through the browser. Have you tried to open Safari to see if it will default to the username/password screen? I've used mine at hotels that change their access every 24 hours and if I try to log back on after the time, it defaults back to the login screen. That is the only solution that I can think of. And yes, if you go to settings and reset network settings, it will clear all of them.

  • Help! Bought a used iMac (2008) and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot.  How do I retrieve or reset the password?

    Can anyone help...
    I just bought a used iMac (2008) from an ebay seller and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot. 
    How do I retrieve or reset the password?
    It came with the upgrade of Mountain Lion but I cannot find quicktime in the applications.  When I try to install anything this Installer Password thing comes up... so I'm stuck.

    ShirlFromNC
    I think you're slightly misunderstanding something, so maybe I'll try to chime in, even though everyone has said it in various ways.
    Before OSX 10.7 (aka Lion) came out, the upgrades to OSX belonged to the Mac and not the user. Probably there was a technical legality in the user agreement that you couldn't do that, but everyone did. I could sell a Mac with Snow Leopard (or anything before that) by just erasing the hard drive, and reinstalling OSX. Then ship it to the buyer. Now, I was pretty honest as a seller, and including not only the original installation discs but also any upgrade. I would only sell a Mac if I was replacing it, so I always was getting the brand new version.
    With OSX 10.7, upgrading was done online, with no disks. So the upgrades were tied to an Apple ID rather than the machine. Recently, I sold a MacBook Pro (to upgrade to a 27" iMac), which came with Lion. I had promised the buyer that it would come with Mountain Lion, but I didn't know that the upgrade was tied to my Apple ID. I made good with the buyer by sending along a $20 Apple App Store card so that she could upgrade to Lion.
    So what everyone is saying here is that you need the original Installation discs or Snow Leopard disk to reinstall and wipe out the Mountain Lion that is on your Mac. It doesn't belong to you, it belongs to the seller, and without his Apple ID and password, you cannot use it. Once you do a reinstall of Snow Leopard, then you can upgrade to Lion and then to Mountain Lion. I do not believe you can upgrade directly to Mountain Lion from Snow Leopard, but I'm not sure.
    If the seller claimed that you were getting Mountain Lion, then he was lying to you (or being more civil, maybe he just didn't know like I did). If you bought the used machine from Amazon Sellers or from eBay, then you have recourse through the feedback system or through PayPal. If you bought it any other way, you're on your own.

  • I bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

    i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

    If it's activation locked, you can't; go back to the shop and ask for a refund.
    (120778)

  • I buy second hand phone, but its lock, now i want to use zain SIM in it so how i can unlock it

    i buy second hand phone, but its lock, now i want to use zain SIM in it so how i can unlock it

    Contact the original cellular provider, as they are the only ones that can provide unlocking.
    Stedman

  • Bought a used imac, need to wipe but have external dvd

    I bought a used imac that was not wiped clean. I want to start fresh and reinstall the original operating system (which I have the disks for).
    However, the built in dvd player does not work, and I have an external DVD player. Will I be able to use this? My concern is that when I wipe the hard drive, it will lose the drivers for the external player. I'm not techie enough to figure out what to do next if that happened, and I don't want to have to make a trip to the apple store (very far away).
    Also, is there a way to tell if the install discs that I was given are the right ones for this machine? I also don't want to get stuck finding out that I have the wrong discs and then have no operating system anymore.
    Thanks...

    My concern is that when I wipe the hard drive, it will lose the drivers for the external player.
    If you can boot from a disc in the external drive, it should be OK.
    Also, is there a way to tell if the install discs that I was given are the right ones for this machine?
    Start the Installer. If it doesn't show an error message, you have the right disc.

  • I bought mew iphone 5c i want to copy songs from my laptop but its all in mp3 format and i installed itunes in my laptop and synced all songs are sit in my iphone.but my doubt is iphone support only itunes na.then how mp3songs played????

    i bought mew iphone 5c i want to copy songs from my laptop but its all in mp3 format and i installed itunes in my laptop and synced all songs are sit in my iphone.but my doubt is iphone support only itunes na.then how mp3songs played????

    Hello there,
    Thanks for using Apple Support Communities.
    If you would like to sync music to your iPhone, you will need to use iTunes on your computer, and then follow the directions in the article linked to below.
    Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
    Cheers,
    Alex H.

  • HT201328 I bought iPhone on eBay but its IMEI is still linked with an existing AT&T account. Seller doesn't reply on my messages. As far as I know this eBay seller isn't a contract holder. It's just a second-hand shop. I have retail box but don't have a r

    subj
    I bought iPhone on eBay but its IMEI is still linked with an existing AT&T account. Seller doesn't reply on my messages. As far as I know this eBay seller isn't a contract holder. It's just a second-hand shop. I have retail box but don't have a receipt  
    AT&T support can't unlock it until its IMEI is in use on a customer account. What I can to do?

    Nothing you can do, if you the seller won't respond to you.  Sell it back on Ebay.  Lesson learned, only buy iphone from an authorized apple dealer.

Maybe you are looking for

  • My USA purchased iPhone 4S factory unlock is not working in India as it gets no signal bars

    Hi, I got my iPhone 4S from USA, which came with AT&T sim in it. It was sold as factory unlocked but when I inserted Indian sim card in it , there appeared the name of the service provider but no signals. Can anybody help as what best can be done to

  • Help: Batch Renaming in Predefined Order

    I couldn't find the answer on here, hopefully someone can redirect me or help me out. There's a feature In Photostation, another metadata editing software, that I assume should be in Bridge although I can't figure out how to do it. I frequently get a

  • Filecache.cpp 988 and trancoding error resolved by archiving

    After a couple of days of editing I tried to export a DVD (or any format), but I got only errors. Even "render" resulted in errors. These are examples of errors I got: filecache.cpp 988 Transcoding error The only format I was able to export to was MP

  • GDR2 update failing with error 8018830f

    Hi! Lumia 920 phones on the norwegian carrier Telenor all seem to have this issue. (myself included)  Is there a flaw in the update? or is there a fix ? (and don't say "hard reset" Moderator's note: We have removed the link as it contains a link to a

  • Quicktime causes ehrecvr.exe in Windows MCE to crash

    I'm not sure why I am getting this problem now but every single time I install Quicktime it causes an error with ehrecvr.exe saying that the memory could not be written and gives memory addresses. When I uninstall it the error goes away. I am thinkin