Bought app.. and iphone 4 / itunes 9.2 stops syncing and wont load any apps
Hi, been using itunes and iphone 4 all dandy on win 7
Bought a sat nav app in itunes today, downloaded.. shows in itunes "apps" folder.
-From now on when I hit sync, it locks the phone while doing sync.. for like 5 seconds.. then stops as if a full sync has been done.
Have done the total uninstall as per apple support page, and rebooted and re installed. Exact same. I cant load any new apps or back up new ones bought on phone.
What's goin on? Any ideas pls?
dylan1981 wrote:
The EXACT same thing is happening to me. My phone is brand new, so the fact that I can't activate it due to this problem is really frustrating. I've uninstalled and reinstalled iTunes several times, followed apple's instructions in its problem solvers guide...nothing seems to work. I've messed around with the drivers a bit too, with no luck. Anyone have any ideas?
Go to the Event Viewer (Control Panel || Administrative Tools || Event Viewer) and look under Windows Logs || Application. Do you see any Bonjour errors? Since Windows 7 recognizes the camera part of the iPhone (nicely done Win7 integration!) Microsoft is probably not the culprit here.
Uninstall/reinstall iTunes is part of the process, but you also have to make sure you uninstall all the other components Apple installs (Apple Mobile Device Support, Bonjour for Windows, QuickTime), do a reboot, and then install everything from scratch. That may fix the problem.
This is exactly what an Apple guy talked me through over the phone. (I think I even uninstalled Apple Software Updater) I had a similar problem with the iPad on Win7 x64 - it was Bonjour that is the culprit. The x64 flavor of Bonjour for Windows is not as stable as the 32-bit version.
But everything has been golden for me since the reinstall...
Give that a try.
Then if not, you could start looking to see if there is another ZeroConf/SSDP provider that is conflicting with Apple's somehow.
SS
Similar Messages
-
hey all just trying to set up my ipad synced up with itunes but now if i try to download any apps i put my password in then comes up with unknown error and wont download any help would be great
Reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My iphone wifi problem wont detect any wifi networks and wont detect any bluetooth networks.
my iphone wifi problem wont detect any wifi networks and
wont detect any bluetooth networks.https://support.garmin.com/support/searchSupport/case.faces?caseId=%7Bb62e0460-4 d48-11e3-f27b-000000000000%7D from the Garmin Support site. The iPhone 4 is not compatible because it does not support the low energy bluetooth transfer that the iPhone 4s and later do.
It should connect properly with your iPad mini, but it requires an App. Also mentioned on Garmins' site. -
HT1386 ITunes says 'preparing to sync' but never goes any further (IPhone 5c)
ITunes says 'preparing to sync' but never goes any further (IPhone 5c and Outlook 2010
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
Have you selected manually manage music?
-
I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.
The iphone is not storage/backup device.
The sync is one way - computer to iphone.
The only exception is itunes purchases. File>Devices>Transfer Purchases
You should copy everything from your old computer, or your backup copy of your old computer, to your new one. -
i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help? Please??
You can try going to iTunes with your device connected, select your device, then click view, show duplicate items
-
I updated iphone 3G to latest software and since then it doesnt recognise sim card and wont restore, any thoughts yall?
iPhone 3G, iOS 5.1Turns out restarting my mac fixed it.
-
I just got a new itouch and cannot load any music or media onto it using the newest version of itunes. Every time I try the loading bar at the top says "finding purchased items" and then everything locks down and I have to force quite out of itunes. How do I make this stop???
Make sure the computer is authorized. From the iTunes menu bar click Store / Authorize This Computer.
iTunes for Windows: Troubleshooting security software issues
And try disabling anti virus software and turning off the Firewall, then try syncing with iTunes.
Disable antivirus software
Turn Windows Firewall on or off -
during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #
In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right???? -
I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
IPhone will connect to network but wont load any internet pages.
OK, I have an iPhone (1.1.1) and an apple airport graphite base station which is connected to a D-Link G604T router.
iPhone will connect to the airport but wont load any internet pages. My iBook works fine on the internet when connected to the airport.
Any ideas?
Thnanks.Daniel Langer,
Make sure the graphite base station is configured as a bridge, and not assigning IP addresses itself if the D-Link is doing DHCP.
If it is acting as a router, you will have NAT occurring twice, which can have a variety of issues.
Hope this helps,
Nathan C. -
My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
== This happened ==
Every time Firefox opened
== Today ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16Read this somewhere else: Can't find it again so can't reference - apols.
fixed by entering
about:config into the nav bar
toggle dom.storage.enabled to 'true'
worked for me - but don't know what it does or why :) -
still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud
Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2. -
still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?
Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.
Maybe you are looking for
-
Wi-fi greyed out on iPhone 4s after updating to ios 6.1.3
I was given an iphone 4s after a friend upgraded to the 5, I plugged in to itunes to set up and it said there was an update which I did and now the wi-fi is greyed out and will not turn on. I have tried the suggestions that apple give, the reset netw
-
Exporting PDF to Print - Zero Bytes
Hi All, I am trying to export my brochure design 104 pages. A4 size. It is a furniture brochure so you can imagine there are hundreds of linked files. Once I have selected Export PDF for Print as I usually do with my flyers and posters, I select the
-
dear gurus i have added a field U_awkey in rfposxext structure and when i run the t-code fbl1n it shows me the document reference key which is linked to the table bkpf-awkey. i have made my own report and i want to fetch the data from structure rfpos
-
Why can't I save an icc profile to a template?
Why can't I save an icc profile to a template?
-
Regarding Collaboration Team room group getting stored in LDAP
Hi , i have a requirement to met at earliest . Presently we are running with EP 7.0 SP 17 with MSADS as UME datasource. Requirement is that collaboration team room are getting stored in LDAP directory in mass. i have to store collaboration room grou