Bought iWork 09 physical disks; installed on MacBook Pro; App Store recognizes it. Any way to download it to another Mac using the Mac App Store?
Hi. I bough iWork 09 and installed it on my MacBook Pro. When I launch the Mac App Store, it recognizes that Pages, Keynote and Numbers are all installed. Unfortunately, I've now lost the discs and I now want to install it on my Mac Pro. Is there any way to do this through the Mac App Store?
Thanks..
No, only the version bought through the MAS is avaiable from the MAS for download to other Macs.
Similar Messages
-
I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!
Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html -
Is iWork a standard install for macbook pro?
wondering why I don't have iWork on my new MacBook Pro or on the "Everything Else" disc.
Only iLife is pre-bundled. iWork has never been pre-bundled.
-
I just bought this macbook pro, if im watching a sport event and doing something else on the net it is so slow moving back and forth between sites with constant freezes and shutdowns. my old sony viao was much much faster.
It appears I have 4 gb of ram my receipt says 2 x 2gb. and when I check using the apple icon in upper left corner it says 4 gb. is this my max? is there anyway to speed this up? I will buy more memory if needed, if not Im returning this comp as Im very unhappy with it.
ps. Im ****** that my pc is better, i so want to be a mac.
please adviseIt's possible the DNS setting your ISP is using are interfering. Although your PC works OK Macs can be sensitive to DNS settings. Here is a MacWorld DNS Troubleshooting article that explains the issue and below is how to fix it.
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
11. Try out your MBP and report what happened.
Roger -
I bought a Macbook pro this July. Everything has been normal except about a week ago I started noticing I had to plug things in a few times in order for them to connect. Today I realized that one of my USB ports has been the problem, not my devices. THey connect right away when plugged into the right USB port next to the SD slot, but not at all when plugged into the left slot by the firewire hookup. Is this a problem that has a quick fix or am I going to have to go to the mac store?
Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
HT204347 if my macbook pro was stolen, is there any way i can find it ?
i bought my pro two years ago, but it was stolen yesterday, is there any way I can find it ? please help. it hais important documents and pounds of memeries.
If you had iCloud enabled...
Go to www.icloud.com > iCloud
then login then click Find My iPhone (works for finding your Mac also)
This will only work if the Mac is turned on and Find My Mac was enabled in System Preferences > iCloud
If you did not sign up for iCloud before the Mac was stolen > Reporting a lost or stolen Apple product
A stolen or lost device cannot be located from the serial number. -
really have a hard time when leaving the computer on when attending other matters in the house. When returning, the screen is completely black and unable to wake(?) by touching the mouse or touch pad to put my password and be able to use the computer. When I move the mouse pad looks like I am using the eraser like in photoshop and it clears the screen little by little. Now I am able to point to the middle of the screen and erase the area where the password is in order to get to the screen and use the computer again. Anyone else having this problem? Took the laptop to the apple store near home and they told me there is nothing that can be done and I have to wait untile the new operating system, Mountain Lion comes out and supposedly this will fix the problem. HELP!!!!
I was so frustrated I call the Apple Tech Support and they walked me through. It has been doing great. The screen still turns black but now, when I touch the mouse or touch pad, I get the password prompt. The Apple Store did not help but talking the the Apple Tech has helped a lot. Thank you.
-
Can retina macbook pro ssd be upgraded in any way?
so can 13 inch models ssd be replaced with bigger storage option? are there any apple or third party replacements available? if yes then what is aproximate cost for each and how fast can replacement drive be(can it measure up to original) ?
For late 2013 MBPs, only Apple could do any repair in the situation that you describe. Exactly how they would do it, I cannot answer with authority, but if the SSD was the only issue, I would think only that would be replaced, not the whole logic board. The SSD is held in place by one T5 Toex screw.
Ciao. -
Both connected to wifi. Both are using same FaceTime account email address ( both my devices)
Eh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved.
For future reference.
My TC is a 3rd gen.
I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
The airport utility then signaled to issues remaining:
1) Internet access was cut - this I solved by simply reseting the cable modem
2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
I did have AppleCare....
I'm online again and I hope for good.
Thanks a lot
PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration -
I purchased this macbook pro last month, is their any way to upgrade my laptop for free?
it's just been a month. do i really have to spend money again?
i ordered it on 31st of may..... but the shipment was received on 8th of june..
are there any hopes still to get a free upgrade? -
If i dont have original install disks for my macbook pro 2009 can i create one?
if i dont have original install disks for my macbook pro 2009 can i create one?
No, but you might be able to purchase replacements:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site. -
OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
I phoned to Apple (AppleCare) and they don't know why this happens.Hello,
Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
From the MBA, install on the 15" MBPr's disk, in that order :
The 10.9.1 update for Mavericks except MBPr
Download
and then the 10.9.1 update for Mavericks specific for MBPr
Download
The MBPr should be bootable again. I did it for an external HD.
Hope this helps.
Best,
ÉrIC Miclo -
Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?
I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?
-
I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.
64 bit.
32 bit won't use all your computer's ram.
64 bit allows you to run 32 bit programs
Your computer is 64 bit
New programs use 64 bit.
There is no reason to use the 32 bit version of Windows. -
After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?
Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.
Maybe you are looking for
-
Renaming and/or adding genres in iTunes
I am organizing my albums in the recently updated iTunes and wish to (1) add some new genres and (2) rename some of the genres currently listed. Is either possible? Thanks!
-
How can i add a new row in System Matrix passing itemcode and quantaty
Hi All, I have to add new lines in the matrix system only through the itemcode and item quantity. I tried several ways without success. Maybe the following code help to explain what I'm trying to do. Someone already inserted rows in the matrix system
-
Topic really says it all. I have a PC and have been using Safari as my browser, now a free download from Apple. I need to download/install Flash for the Safari. Which download will work, etc.?
-
hi, how to use bdc in abap , and give one example program .
-
Hi there! How can I dezone my DVD (I am in region 2 and I would like to be able to see dvd in region 1) Cheers