Bought new Audigy SE, unable to install new Vista Driv

I just bought and installed a new Audigy SE, immediatelly after turn on the computer via Windows Update download and installed the drivers and that worked fine with playback but the mic sounds in very low, I even tried to manually edit the mic boost registry but still the mic is practically useless. These are the drivers:?[img"]http://img.photobucket.com/albums/v385/javiersf/AudigyDrivers.jpg">?Another trouble: At the same time Windows Updated downloaded the Audigy Vista, I downloaded the new Audigy drivers for Vista posted on June 25th, but when I try to install them I receive this error message:[img"]http://img.photobucket.com/albums/v385/javiersf/ErrorVistaDrivers.jpg">?I even restored my system just before the windows update driver was downloaded and installed but?still I receive this error. I tried to manually delete the drivers, uninstall the audio card and the restore it, but still I am getting this error and I'd like to take advantage of this driver and software to see if that will fix the problem with the low power mic.

@javiersf; if I were you, I would give back that soundcard back and wait further for some support from Creative. 'cos , there is not a good support for Audigy users, especially for "LS/SE/Value" users; I don't recommend that card to anyone.
BTW, there is not a driver for Mic Boost, since the first Vista driver released. You should find an alternati've way (like using mic from Onboard sound card) or you have to use your mic like it's now.

Similar Messages

Installing 7.2. Says "Unable to install the gear driver set at this time...

Hello, Im trying to Install ITunes 7.2, and I get this error:
"Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
I'd be indebted to any suggestions or resolutions!
Thank you!
E Machines T6216 Windows XP

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

"Unable to install the GEAR driver set at this time...."

Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
Please help!
--Jon

When you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
It requires editing the registry so be careful.

"Unable to install the GEAR driver set." in Vista Premium solution!

If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

Is this 64 or 32 bit Vista?

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

New Vista driver 2_10_0000 for build 52

Surely there is some mistake with the Vista build number in the driver description (523). Was the driver description on the download page just copied from the 2_07_0004 Vista Beta driver description?
I don't understand why a newly released driver would be designed to support a Vista build from last year. Unless the Creative driver team was all hit by a bus late last year, which would actually explain quite a few things...

Excellent. I'm happy to see that not only was the supported build corrected, there is also now actually some information about what works and what doesn't. Progress, no matter how small it is, is always refreshing around here.
I don't think my statement was too far out of line. I was just trying to figure out why only such an old build was supported. I'll try to keep my sense of humor under control in the future.
I didn't have a chance to download the driver this morning, so I didn't see the included readme file.
I'm off to try to install the Vista driver now, which appears to support the Elite Pro, unlike the recent XP driver.

Bought chaos rings game, unable to install to phonr

I purchased a game via the app store on my phone, but had to download on my pc because it was almost 300 mb. I tried syncing it to my phone, and get an error everytime, even after restarting the phone. Heres the screenshot
http://i52.tinypic.com/316k9c8.jpg

@javiersf; if I were you, I would give back that soundcard back and wait further for some support from Creative. 'cos , there is not a good support for Audigy users, especially for "LS/SE/Value" users; I don't recommend that card to anyone.
BTW, there is not a driver for Mic Boost, since the first Vista driver released. You should find an alternati've way (like using mic from Onboard sound card) or you have to use your mic like it's now.

Unable to install Network Adapter Driver for Windows Server 2012

Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak Shah

It is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki

Satellite L650-10D - Unable to install any graphic driver

Hi,
I have just spend most of the day trying to get this laptop to use proper resolution. Story:
The HDD failed and I had to get a new one. I downloaded Windows 7 Home Premium and installed everything from the scratch on a new HDD. The serial from the back of the machine worked fine with the Windows (fortunately).
After downloading a lot of drivers from Toshiba website I got working everything except the Display. At the moment the Windows is using: "Standard VGA graphics driver" which can not go furher then 1024x768, very annoying.
Steps I tried:
1) I downloaded "tc70077100m" AMD driver from the website.
Installation of the ATI Catalyst went thru, but the drivers were not changed.
2) Double clicking on "tinstall" or "tinstallwb" in the unpacked driver directories resolves in briefly seeing the icon on task bar after which the installer exits, nothing else, no error. Very professional ...
3) I tried manually updating the driver using the Device Manger pointing to directly to the file from the package. First I got warning, that the driver is not compatible, but I forced it to continue. I picked "ATI Mobility Radeon HD 5650". The installation failed saying that my version of Windows is not compatible.
4) I also tried downloading drivers from ATI website, which failed each time saying my software/hardware was not compatible.
5) I also tried downloading drivers for other L650 notebooks (the Intel ones) which failed for incompatibility.
Please advice how can one install graphic driver on this device. I am not after gaming, I'd just like to get reasonable resolution.
Regards

Hi kotatko,
Your notebook is equipped with ATI graphic card so other display drivers like Intel will not work. You have to install the display driver from official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start with display driver installation make sure that *chipset driver* is installed. The chipset driver can be downloaded on Toshiba page too.
May I ask you why you dont use the Toshiba recovery disk with all drivers and tools that is more comfortable?

New VISTA DRIVER RUINED MY COMPUTERS AUDIO WITH AN UPSET FAILURE!!!!!

My Computer Ran great with the last vista driver. But i was curious and decided to download the lastest one that came out yesterday. I installed this and if had me replace my audio console. Then i restarted and i went to double click my audio console to change modes and adjust sound. But it said "No Device supported, choose one from the menu" there was nothing. I also noticed that there was no more sound at all only beeps from my computer for sound. So under device manager it said it was working. SO i uninstalled it and then i put in the driver cd and then it still had the same problem even with the original driver back on it. So something is very very very wrong with your new drivers since it destroyed my sound!
If you guys can think of a solution then please please help.

Uninstall all Creative software and drivers, reboot, apply driver cleaner, reboot again and install latest driver. The new one is working great for me.

Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Insufficient disk space, unable to install on different drive.

I forgot to change the install path and tried installing photoshop, illustrator, and indesign on my C drive which was full.
I uninstalled everything and switched the install path to my D drive and tried again. But now im getting an error when trying to install on D that my C drive is full.
I'm unable to install any of these programs despite uninstalling everything including creative cload manager.
any help?

Okay looks like I might have solved my problem.
Since C: was seriously full >330mb I cleared about 10 gigs.
Seems to be installing now. Must have some kind of file the has to be installed on C either way.

I can't hear my SPIDF IN on my Audigy 2 Platinum afer installing Windows Vista Dri

After installed the latest driver 6.03.07, i can't her me digitial coaxial in, it's recording but i can't hear anything in realtime, also i can't recieve information over my MIDI in and Out-puts at the front panel! It's also impossible to downgrade the driver to the beta versions, the problem stays the same!?Who can help?!

I have the exact same problem. Anyone have a solution?

Bought new Audigy SE, unable to install new Vista Driv

Similar Messages

Maybe you are looking for