Bought the new iphone and tried to restore it to my old iphone settings. It synced some of the old data onto it, but then it froze and continues to. It says to restore it but I'm afraid to lose my contacts. Will the contacts be lost?
Bought the new iphone and tried to restore it to my old iphone settings. It synced some of the old data onto it, but then it froze and continues to. It says to restore it and erase everything, but I'm afraid to lose my contacts. Will the contacts be lost or will they be there when I sync it back up?
Hello timotim56,
This can be achieved by removing the device via iCloud.com
iCloud: Remove your device
http://support.apple.com/kb/PH2702
Cheers,
Allen
Similar Messages
-
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I sold my iphone and the new owner is trying to register it under his apple account. How do I delete the serial number from mine?
https://register.apple.com
-
I already had itunes downloaded to my desktop but my laptop froze and so it got removed. Anyway i can restore it.??
There's a few ways of doing it. The following article is worth checking through.
iTunes: How to move your music to a new computer -
and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(
The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ -
I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !
Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook. -
I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?
You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
Thank you for your recent iPhone 5 purchase at the Apple Store.
We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
Thank you for shopping with Apple.
Sincerely,
Apple Online Store Team -
i updated my ipod touch to iOS 6 and it downloaded. hen i went on itunes to restore it but then it frooze and now it will not come off if the apple sign.
I presume you mean to say that the iPad is not being recognised in iTunes! If so,
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are not faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/ -
I have a new ipod nano to replace a previous one. I can't copy over my old playlists on to the new ipod. have tried selecting the playlists I want to sync but when I click sync , nothing happens
You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
I bought an iPad 2. The first charge i made Was from the 86% to 100%. After that i used it. But then i read and in some sites say that it has to be charged 24 hours. So Now i have that question i did it well of wrong?
You can charge anytime. You can also plug it in over night if you want because you can never over charge it.
http://www.apple.com/batteries/
http://www.apple.com/batteries/ipad.html -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?
Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern -
i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern -
I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.
Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
HT5621 It says that the new email i tried to enter as my new apple id is not available. Why?
It says that the new email i tried to enter as my new apple id is not available. Why? I was trying to change my email to a email i always use instead of one that i never do. When I went to change it it said that the email was not available. I have never used this email before for apple. Can someone please help me?
Hello Jessica
If you have on your previous Apple ID a rescue email address and that email address is what you are using to create a new one, then it will not let you use it. See if you can log in to your Apple ID and remove that email address. Check out the article below for more information.
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620
Regards,
-Norm G. -
Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?
GB and iMovie pre installed?
http://www.apple.com/ipad/built-in-apps/
Click: Browser All Built In Apps
iMovie and GB must be purchased.
If you have installed GB and iMovie on the iPad 1 and synced using iTunes, just sync the those apps to the newer iPad with iTunes. No re purchase necessary with the same iTunes account.
Maybe you are looking for
-
I'd like to go back to previous os
I would like to go back to the previous iOS for the iPhone 4S
-
This iPod cannot be used because the Apple Mobile Device service is not
I have a Dell 32 bit Windows XP and an iPod touch. Recently I tried to sync my iPod but received the following error: This iPod cannot be used because the Apple Mobile Device service is not started. So I googled the error message and someone suggeste
-
JSF page goes blank when using with servlet filters...
Hi there, I have a JSF page, which shows up fine (in both IE and Firefox) in normal scenarios. But as soon as I apply servlet filters onto the faces extension, I get into trouble. So after setting up the filters, when I load the same page(s) in each
-
I am haveing problem watching video's after downloading adobe flash player
i am haveing problem watching video's after downloading adobe flash player, how can i make it working?
-
OBIEE: incorrect selection of fact table when generating SQL
I have 2 dimension tables ("DimA" and "DimB") connected with one fact table ("Fact1"). Also (only) "DimB" is connected with another fact table "Fact2". When I want to make a report with one attribute ("Attribute_A") from "DimA" and another one ("Attr