Bought video adapter for orig ipad, it does not fit

I bought a new composite video adapter cable for my original ipad.
It came in and does not fully seat. Ipad doesn't recognize cable.
Apple sent a new one...same story.

And?

Similar Messages

  • I'm Looping for an european Mains adapter for my iPad air but not the hole adapter just the compatible top

    Hi everybody, I'm looking for an european mains adapter for my iPad air, but not the hole adapter just the compatible top. Do You Knowledge if I can Bus ist anywhere?

    Perhaps this.   Or any ordinary travel adapter you can buy at any airport or electrical store.

  • SAP DSD - geocoding for customers - field format does not fit to examples

    Hello to all,
    We have a customer requirement behind this. We intend to use the DSD-Addon for several issues. One of these issues is to store geocoding information for our customer data within SAP. The SAP-Release is 4.7 with the DSD-Addon active. I checked all threads within the network and also checked SAP-Help and OSS-messages. Now our issue:
    When I look at the fields for storing the geocode (Longitude and Latitude) they do not fit to the testdata I got from our customers. The data look like this:
    customer:       x-Coord           y-Coord_
    10001             744264,3384   6657823,32
    10002             813368,6494   6699051,344
    10003             790475,8379   6702787,298
    10004             862729,1893   6690792,612
    The fields in the DSD-Customerdata have the format "123.123456789012". So I wonder how my data could fit into these fields. Is there anybody who has experience with this? I did not find any information or examples in the SAP-Help for this. What is wrong the format of the fields or the format of the x/y-Coordinates?
    Thanks in advance!
    Best regards,
    Gerlinde von Calle and Thomas Vomhof
    Edited by: Thomas Vomhof on Oct 8, 2008 6:12 PM

    Hi Srinivas ,
    Let me confirm which version of SAP your using
    As per your post -
    1. Table total does not fit into window 
         Check your table is fit in the window or not (window will be main window)
    2.Error occured while sending mail SO_OBJECT_SEND, return code L (message type: warning)
    Check your parameters that passing to the SO_OBJECT_SEND
    3.Page format with orientation unknown (message type: warning)
         Check your styles that are using  in the form 
    4.Form TOTALS has wrong page format (message type: error)
         Chekc your page format that is going to to support printer what your using - check the printer settings.
        I think your are using the u r own z page format
    Let me know if any concerns...

  • Recommends memory for Equium M50-164 does not fit

    I have the Equium M50-164 in its original configuration.
    I wanted to add more memory so, on the recommendation of the Toshiba Product Support page, I purchased the Toshiba PA3411S-2M1G memory module (from eBuyer).
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?service=UK&OPTION_ID=118626&t oshibaShop=true&selCategory=4700
    On attempting to fit the memory module into my machine, I found that it does not fit! The plastic 'divider' between the two contacts in the laptop does not match the position of the notch between the two sets of pins on the memory module.
    Tosh recommends Part Number: PA3411S-2M1G 1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
    The memory that arrived has PA3411S-2M1G 1024MB (1GB) Memory PC2-4200 DDR2 (533MHz) on the box.
    Someone in the forums says PC2700 PA3313U-2M1G is the part number.
    The manual that came with the M50 states that PC2700 memory is required.
    Does anyone know the correct part number, or a suitable alternative by a different manufacturer?
    I'm quite annoyed, as the support helpline suggested I phone their Sales department! So they can sell me more incorrect memory modules?!? Now looking forward to the running the returns gauntlet with eBuyer...
    Cheers,
    Andy

    Hi there,
    I believe its annoying since they told you the wrong information. I wish you good luck for returning the memory module, maybe you can also try to sell it to another ebayer.
    Regarding your memory: I agree with Ghost UK, you have to use DDR1 memory and not DDR2.
    Dont forget to assign some reward points to GhostUK, I think he would appreciate it. ;)
    Cheers guys

  • Bought video that shows up on itunes does not show up on ipod

    i have many episodes that i bought from itunes that once worked perfectly but are now messed up. I can play them on Itunes, but I only hear audio and see green and pink lines. When I look for them on my Ipod, they are nowhere to be found. How can I fix this? I hope I didn't waste money on all these episodes without being able to watch them.

    GO HERE:
    http://www.apple.com/support/itunes/store/download/
    At the bottom of the page is a light blue box. Fill it up with detailed info about whats goin' on. They usually reply withing 48 hours!

  • I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

    The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2.  Has anyone seen anything like this before? I've included a picture

    You can return a new Mac within 14 days of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.

  • I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

    I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
    Thanks, Steve

    This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
    This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation).  http://support.apple.com/kb/TS4085

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • VGA to Video adapter for a late 2004 iBOOK

    I found a free TV and thought maybe i could use it as a larger screen format. so i went searching for cable adapters.
    I did do a search here in the search query box on word search vga to video and results show related to clam shell versions.
    while looking around the Apple web site for a VGA to Video adapter for a iBOOK G4 that shows a CPU speed of 1.2 GHz and a designation of PowerBook6, 5 yes that is how it is written in the System Profiler 'PowerBook6, 5'.
    Using a tape measure the screen itself with out the plastic frame shows a width of 9.5 inches , including the plastic frame shows: 11 and one quarter, that could round off to 12 inch even though it is not at or beyond the point 5 mark.
    The original paper work is some where ?.
    I found a VGA adapter that could possibly work at
    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    yet the wording states: The video adapter cable plugs into the video output port (mini-VGA) built into the back of the computers listed in the compatibility section below.
    Compatible with:
    iBook without an external reset button, eMac, iMac G5, or 17-inch iMac (1GHz) with mini-VGA port.
    does not say much for the laptop.
    There is shown a VGA adapter for the iBook here:
    http://support.apple.com/kb/HT2721?viewlocale=en_US
    yet finding it at the store ???
    if i copy the part number in a search query at the store the results show a Lexmark copy machine.
    I found many DVI adapters at:
    http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY#overview
    And then here:
    http://support.apple.com/kb/TA27124?viewlocale=en_US
    as copied and pasted here:
    The Apple Mini-DVI to S-Video/Composite Adapter does not work with PowerBook G4 (12-inch) computers,
    the one thing i have notice is that no compatibility charts actually show support for the 1.2 GHz iBOOK G4.
    I also see that there are Mini DVI to VGA adapters, Mini ?, does mention pin numbers ??.
    I was wondering if i could crossover the DVI to VGA thru the adapters using VGA and DVI cables, yet pin numbers and compatibility questions still remain.
    Suggestions ?
    Thank you.

    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    The adapter in the above link is the one you need.
    ~Lyssa

  • Apple digital AV adapter for the ipad 2 or a Apple TV

    What should I get a Apple digital AV adapter for the ipad 2 or a Apple TV?
    Wanna use it for showing photo and movies:)
    thx

    Assuming that you already have the iPad 2, you're looking at a $99 purchase versus as $39 purchase. Why to spend over twice as much on the AppleTV?
    Another thing it would depend on is how often you plan to use the connection. If it's going to be an everyday constant thing where you're likely to find yourself wanting the surf but the iPad is connected to the TV (so you have to disconnect then re-connect each time), then maybe that will be enough of a hassle to get the AppleTV. If you only want to use it every now and again (like after renting a video from iTunes, or to share content when people come over), then you may just get the Digital AV adapter and be fine.
    Actually, I just thought of a third option. You want the connection to be more convenient, but would still rather not have the AppleTV sitting there unused most of the time, you could add the iPad 2 dock for $29 which would be $69 dollars and you're still under the $99 of the AppleTV.
    Oh, and one MORE thing to think about If you've got a computer connected to your network (that's connected to your media library) you may find that having the AppleTV is an easy way to get all that content to your TV, so it would be an additional benefit to the whole situation above and beyond just the iPad.
    For me, I purchased the AppleTV, I have one stationary computer (a Mini) that serves all my music and videos that are in my iTunes library, plus an iPad which I can use as a remote control to control the AppleTV, or I can use AirPlay to push video/audio to the TV from any connected device. I like being able to freely switch between modes at any time without disconnecting and reconnecting cables and this setup allows that (also allows making my TV's sound system a broadcast station for all my music!)

  • Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8?

    Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8? I had one that connected my Ipad2 to my tv so I can stream netflix on a TV that does not have the internet. As soon as I updated my iPad to iOS8 it no longer works Help!

    You can speak & make notes. Get Dragon Dictation app.
     Cheers, Tom

  • Will the HDMI adapter for the Ipad serve as an output AND an input?

    I do a lot of video productions and could use an extra moniter on site. The camera I use has an HDMI out, and I noticed there is an HDMI adapter for the Ipad. Would the Ipad recieve/display the signal being sent from my camera? If not, is there another way?

    The Apple Digital AV Adapter only output to TV. It cannot be tethered to a camera.

  • Best Video Settings For The iPad.

    Hi everyone,
    Does anyone know this ? "Best Video Settings For The iPad".
    Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video. it's rather frustrating to have many technical jargons online without anyone giving real pointers at real values in conversion settings.
    Thanks in anticipation.

    Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video.
    It is impossible to answer your question without knowing both the aspect ratio of the source file and your personal preferences for displaying it on a 4:3 iPad screen.
    Basically, you have two options here when converting files of one aspect ratio for display on a screen of another aspect. You can distort the original display to "fill" the ipad screen. (E.g., you can make a widescreen movie exactly fill your iPad screen but then people and objects will look tall and skinny.) The other option is to convert at the original aspect ratio and simply use the iPad "zoom" option to force your widescreen movie to fill your 4:3 screen by scaling the height of your movie to fill the screen and allowing the left and right edges of you movie to be cropped from your view. You have no other choices here other than living with the defaulted black areas.

  • Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.

  • My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    You need to connect to iTunes and restore.
    iOS: Not responding or does not turn on
    You may need to put the device into recovery mode, this is covered in the link on this page.
    Did you back up the device?

Maybe you are looking for

  • Https pdf links won't open in IE8

    https pdf links won't open in IE8 but do in Firefox.

  • How to view BIW  data in XML format

    hi guys ...              just wondering if it is possible to view BIW data in XML format ,if yes how .                     I am looking to pass this  XML formatted data in to another server. venkat

  • Extracting an .xmp sidecar from an ACR-edited RAW smart object layer...

    Hello all.  Given the following situation: Several thousand TIFF files, each containing two RAW files embedded into separate Smart Object layers.  The RAW files were named with sequential numbers prior to being composited into the TIFF files via a sc

  • Set define off

    Hi, Everyone, I am using oracle 11g version on windows server 2003 R2. i am writing a procedure in a pacakage. My procedure is as follows: PROCEDURE PROC_SUBDEPT_USER_LKP IS v_command_1 VARCHAR2(30000); v_command_2 VARCHAR2(30000); v_command_3 VARCHA

  • Free Admin PSD

    To help with App designs and mockups for your App development, I developed this quick Admin PSD 4/5 months ago and shared it to the Alpha testers of apps. So here it is for you guys as well: https://github.com/thenexus00/bc-admin-helper