Bounce DOESN'T sound like Mix Playback, Mid boost, stereo field smaller

Anyone had this one happen yet? Your mix is rockin along, client is happy, you hit bounce and it sounds like someone just threw a comforter over your speakers and cut your low end at 100 during playback?
Freaking out. Never had this happen in years of use. No plugs on Master, bounce Interleaved, AIFF, 48k 24 bit.
Help!
Thanks

I've struggled with a similar problem i.e my mix will sound awesome and perfect when I play it back through Logic and my (pretty decent) monitors. I will bounce the mix and say, bring it into WaveBurner. When I play the mix in WaveBurner is sounds a little different. This makes since as the file has to be dummied down a bit to fit on a CD. The real shock comes when I play the song in say, my car. I expect it to sound little different (different speakers) but what I find is the bass is gone...Or way too loud. Or the vocals are completely soft. Or (I work with bagpipers) the pipes will be so loud you can't hear anything else! This drove me nuts and wasted tons of blank CD's and time running back and forth, re-mixing this or that.
After some discussion with other groups it occured to me that maybe it's my audio interface. If you have a cheap AD/DA converter in your interface then your mixes will not be true. I used a Mackie 400F then upgraded to an Apogee Ensemble. The Apogee doesn't sound as good as the Mackie but I think the output is more true to what you hear on the final product.
I don't know if this helps (and I may be completely off about cheap converters!). I wanted to share my experience with a similar problem. -T

Similar Messages

  • I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area.  Very annoying, besides that it works fine. Gonna

    I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area.  Very annoying, besides that it works fine. Gonna go to apple tomorrow maybe to ask.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Bounced files don't sound like mix

    Help! My mixes sound great but then after I bounce them they sound totally different.
    I get a nice mix going in the "arrange" section. Every track is going to "output 1-2". No clipping, everything sounds sweet. Then when I bounce the project and listen to the mp3 that was created it clips and sounds like it has entirely different eq/compression settings. What am I missing?
    THANKS!

    It seems to be specific to iTunes. If I listen to mp3's through quicktime they sound true to the mix in Logic. But if I take THAT mp3 and drop it in iTunes it clips and sounds like a different mix. I'm stumped and frustrated.
    Thanks for any help.

  • Legacy Doesn't Sound Like 6.0.5

    I need Vocal Setting Help :O) I've updated from Garage Band 6.0.5 to 10.0.2. I tried using the legacy settings. Specifically,  Live Performance, but it does not sound like the Live Performance on the previous version. How can I tweak the settings so that it sounds like 6.0.5?

    Search this forum.  You'll see this issue has been addressed ad nauseum.  However, if you feel there's something wrong with your phone, then by all means make an appointment at the Genius Bar and get it checked out.

  • Spam?????????  anyone know if this is genuine. Doesn't sound like it to me

    Dear Customer,
    It has come to our attention that your account Billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination.
    Click on the reference link below and enter your login information on the following page to confirm your Billing Information records...
    Click on http://store.apple.com to confirm your Billing Information records.
    Thanks,
    Apple Customer Support

    Surprisingly, apparently, three months later, and this guy is STILL active. I wonder why Apple hasn't put a stop to it yet. I just woke up from a nap and discovered that I had received the very same email. Whoever this wannabe scammer is, he must be very young and stupid, because if you hover over the link in Apple Mail, it clearly says "http://kingofcostumes/apple/apple.htm". Being as it is so evidently a ruse, only very novice users are going to fall for this, at least I hope so.
    I did a WHOIS on the domain, and here is what the Terminal spits back for the guy:
       Domain Name: KINGOFCOSTUMES.COM
       Registrar: GODADDY.COM, INC.
       Whois Server: whois.godaddy.com
       Referral URL: http://registrar.godaddy.com
       Name Server: CP3.SIMPLEHELIX.COM
       Name Server: CP4.SIMPLEHELIX.COM
       Name Server: CP5.SIMPLEHELIX.COM
       Status: clientDeleteProhibited
       Status: clientRenewProhibited
       Status: clientTransferProhibited
       Status: clientUpdateProhibited
       Updated Date: 18-jun-2011
       Creation Date: 26-mar-2009
       Expiration Date: 26-mar-2012
    Registrant:
       Crazy Visionz
       265 52nd Street
       Bronx, New York 10469
       United States
       Registered through: GoDaddy.com, Inc. (http://www.godaddy.com)
       Domain Name: KINGOFCOSTUMES.COM
          Created on: 26-Mar-09
          Expires on: 26-Mar-12
          Last Updated on: 18-Jun-11
       Administrative Contact:
          Julio, Aguilar  [email protected]
          Crazy Visionz
          265 52nd Street
          Bronx, New York 10469
          United States
          (646) 300-2612      Fax --
       Technical Contact:
          Julio, Aguilar  [email protected]
          Crazy Visionz
          265 52nd Street
          Bronx, New York 10469
          United States
          (646) 300-2612      Fax --
       Domain servers in listed order:
          CP3.SIMPLEHELIX.COM
          CP4.SIMPLEHELIX.COM
          CP5.SIMPLEHELIX.COM
    The guy isn't even smart enough to cover his tracks. Tsk, tsk!

  • Make clean ADR sound like a large room

    I'm a newbie to Soundtrack Pro and could use some help.
    I have ADR that I need to adapt to sound like the live footage.
    We recorded in a large, empty storage room with 3 metal and 1 concrete wall (wall info just for specificity).
    I taped ADR in a small, normal room with the actor close to the mic. It sounds crisp and clean. It doesn't sound like the large room recordings.
    Is there a specific effect, or a chain of effects I can use to create this sound?
    Thanks.

    Just an additional tip for the future, but try to get the same mic used in the original recording when doing adr, and avoid the temptation to mic it like it's a voice over, cause all the reverb in the world won't turn a very present recording into a location sounding one.
    Having said that the previous advice is good.

  • IPhone Vibrate doesn't sound right.

    When my iPhone 4 vibrates, it has this weird rattling sound to it. I just got a new one from sending mine in, and my last one didn't sound like this.. Should I get in contact with Apple?

    If you are not satisfied then of course you can, a refurb is meant to be as new and yours doesn't sound like it is.

  • "Sounds" like someone is taking a snapshot of g5 without my permission

    Hi There,
    I'm concerned I'm being hacked because from time to time I hear the sound of a camera lens shutter.
    Is there a way of detecting if there has been activity?
    Any advice or help will be much appreciated.
    Kindest regards
    Rob Slaney

    Sorry, Console is in Applications>Utilities, run that and watch the System & Console Logs around the time of the click.
    But if you don't have an iSight or Camera hooked up, then the Sound is likely a Hard drive going bad, or a Fan, or...
    If you wish to check further on the Hacking possibility, (doesn't sound like it to me, but), might look into this...
    Flying Buttress/Brickhouse...
    http://personalpages.tds.net/~brian_hill/downloads.html

  • When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    Hi Eriksimon,
    Firstly, thanks for your message.
    What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
    I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
    I bounced my work to MP3 with highest BIte Rate.

  • Sound disappears on playback in imovie, and is mixed up on exported file.

    What would cause this. i recorded in HD and all files imported just fine. However when i reach a certain scene on playback the sound goes away. if i stop and start again it's there. So i got to export the file using quicktime and when i get to that same scene in the movie the sound is mixed up with other scenes. The wrong sound is playing. it's like the sound files get all mixed up.
    Should i reimport that scene? i don't get it. it plays fine in the event line.

    To the original poster: did you modify the speed in ANY of your clips? After some searching I realized there is a bug and this audio problem pops up if you have modified the speed of any clip to any non-tick mark speed (I wanted 150%, but the tick marks were only 100 & 200%). I deleted the one I thought was a problem, but I had another one at the end that was modified. I reset that one back to 100 and bingo, no more audio problems upon exporting. If you really want the off-tick speed (like I did!) just export a short video with that clip at the off-tick speed, then import THAT movie into your project at 100% speed.

  • Hi everybody, my Macbook air mid 2012 MD 231 suddenly shut down then i can not turn it on. I heard a sound like a fuse is blown or something like that. Did any system break or burnt? I did not charge at that moment. Plz help

    my Macbook air mid 2012 suddenly turn off after a strange sound (like the sound òf a fuse has blown or something like that) and I also feel a burnt smell too while i am watching a film on the internet and did not charge the laptop at this moment. The sound was from the left of it, and now just a dark screen , even I tried charging it (still has green light at the charge tool). I bought it on 13st April 2013, not often use.
    I love apple and i am so sad that a new product which i seldom use could be break so easily and outstanding. It's so late in my country now but i am too disappoint about the trouble so i am writing with hope of supporting from Apple and the community.
    Please help , thank bro

    You will have to take it to an Apple Store for repair.

  • Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

    is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

    is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

  • I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't.

    I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't. What is going on? Can it be fixed? I'm really not liking this new phone!!!!

    Could be an issue with your Carrier and/or location...
    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup...  Restore as New...
    Try a Reset...
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    http://support.apple.com/kb/ht1430

  • I just took in my macbook to the apple store to clean the fan because it was starting make a little noise but instead of making it stop it sounds like an airplane about to take off all the time, it doesn't matter what i'm doing. I dont know what to do now

    I just took in my macbook to the apple store to clean the fan because it was starting make a little noise but instead of making it stop it sounds like an airplane about to take off all the time, it doesn't matter what i'm doing. I dont know what to do now? any ideas on how to make it stop?

    take it back asap.  If it wasn't doing it before they cleaned the fans, they may have accidentally done something that is causing this behavior.

  • Cap loc doesn´t work or light up and when I use shift for cap, it sounds like a typewriter typing

    I have a 2011 model and am running Lion.  My cap lock does not work or light.  When I use he shift to cap a letter, it makes a sound like a typewriter, wierd.  Also when I depress the shift, the symbols on top of the numbers are not as designated.  In order the get the @ sign, I have to depress the option key for it to appear.  The other symbols do not appear correct when I am typing when I depress the shift.  I have to hunt for what key will give me the correct symbol  Very Aggraviating.  I hope I have made myself clear.  I am 70 and not to literate on comps and then an APPLE.  That was my dream and I got but now am having this problem.....  Could anyone please help me.  If you need more info, please let me know as I don´t always make myself clear, so says my husband.

    Go to System Preferences > Keyboard > Modifier Keys. It should look like this:
    If not, press :Restore Defaults".
    With regards to the sound of typewriter, if it's not an actual mechanical sound, by which I mean it's a computer generated sound, you might have installed some application like Typewriter Sound:
    http://www.macupdate.com/app/mac/12077/typewriter-keyboard
    Is that the case? Removing it should solve the problem.

Maybe you are looking for

  • Error while activating enhancement in va02

    Dear gurus i have made an enhancement point in program MV45AFZB t-code VA02 below is the code if sy-uname ne vbak-ernam.   if vbap-ABGRU eq 'Z1'.     MESSAGE 'You are not Allowed to Change RM Block' TYPE 'I'.     ENDIF.     ENDIF. The Code is syntact

  • Install Builder error

    Error message from Install Build LabView 2014 on Windows 7 What might this mean? Call Library Function Node in NI_MDF.lvlib:MDFProdInfoList_Close.vi->CDK_DistParts_GetInstalledProducts_CORE.vi->CDK_DistParts_GetInstalledProducts.vi->CDK_Validate_Dist

  • Xrefs in .fm files vs. .xml files

    Hi all, We have a doc set that we need to access by remote doc teams in various locales. All Frame documents are currently stored under version control as .xml files. Team A wants to retain the document set entirely in .xml files, open and edit them

  • Totals in Break

    Is this possible? #COLUMN_VALUE# substitution in break report

  • Apps that go free & VPP - what are the rules?

    Hi, Just wondering what are the rules once an app goes free & volume licencing? If an app goes free for a certain amount of time & you download it & use configurator to distribute to iPads is this ok? Thanks