Bounce not working in Logic Pro 9.1.7

Longtime LogicPro user (going back to Creator!). Recently, when I Bounce a mix, it doesn't stop at the end point I've set. Sometimes it keeps going indefinitely... I eventually hit Command/. to stop it. but nothing is bounced; sometimes, after I hit Command/., it does bounce but with all the added silence at end.
As far as I can tell, I'm doing everything the way I've always done it, and it's always worked.
I usually set the Cycle points for beginning and end, but this problem happens wheteher I've set the points that way or whether I do it manually in the Bounce window. It happens whether it's an audio file, mp3, or both. It happens Realtime and Offline. And it's gone from being an occasional glitch to the norm...which of course makes finishing work impossible! Big problem!!
Any help/suggestions/solutions... even workarounds, most appreciated. Thanks.

If you're still using Snow Leopard you might try this fix, although it's not exactly the same problem they could be related. Don't delete the file, just move out of the location they describe, then apply the fix they recommend.
http://support.apple.com/kb/TS3968
Also, In the bounce dialog, make sure "Include Audio Tail" is not selected.
On some occasions that will cause a bounce to go on forever, even more so if "Normalize" is also selected.

Similar Messages

TS4628 onscreen keyboard does not work in logic pro x

onscreen keyboard has stopped working in logic pro x - latest version.
There is no indication of midi in or out on control bar when keys pressed.
also, certain keys do register do not trigger from outboard keyboard instrument.
when playing back tracks, the relevant keys auto depress on the onscreen keypad.
audio output is fine on the system. all keys on piano roll keyboard work fine.
The onscreen keyboard works fine in garageband
have reset all midi assignments in prefs.
have reinstalled the program but the issue remains
silvejon

You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
Turn off all iOS devices to test for iOS App
Delete CS prefs to test for conflicting Midi Controller issues...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.

GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

Overdubbing not working in Logic Pro X

Hi everyone,
I am running LPX 10.0.5 on my Macbook Pro (Mid 2012) with OS X 10.8.5 and unfortunately midi overdubbing (for software instruments and external midi tracks) seem not be working for me. The Replace button is of course deactivated and the midi recording settings are set to "merge when cycling" (translated from German, I don't have the English version).
Any help would be much appreciated.
Regards

Hi
I've looked at the info posted above and I still can't get this to work consistently in Logic Pro X - 99% of the time it just doesn't work. I'm beginning to think this is a bug. I have also ensured that the "Drag: Overlap" is set as I think by default it is set to "No-Overlap" - not sure if this makes a difference but I read in the Apple Discussions Forum that this affected some other users.
My project setup is a follows:
Record->MIDI Recording Options->Join with Selected Regions
Punch/Overwrite - Disabled
OSX Mavericks 10.9.1
Logic Pro X 10.0.5
Any help on this would be appreciated as I just can't this to work as it did in Logic 9
Thanks
Neil

MIDI Keyboard Not Working With Logic Pro X

I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
Take note....thanks for your replies!

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Amp designer and pedal board not working in Logic Pro 8

Hello! I am new to LOGIC PRO 8 and maybe my silly question has a easy answer. When I want to record a guitar or a bass in the audio channel created for it, and want to insert for example a complete rig, the sound won't load and a message will apper saying "pedalboard not available" "amp designer not available" or pedal not available". If I open Mainstage 2 or Garage Band and I play, pedals are working and all amp modulation as well. If I go and look into the application support and plug-in settings folders it seems to me that everything is there. What am I missing or doing wrong? how can I solve the problem and make these enable for recording? THANK YOU FOR HELPING!

primocaster wrote:
"pedalboard not available" "amp designer not available" or pedal not available".
Hi
Amp Designer and Pedalboard plugs are in Logic 9 only...
CCT

Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

Midi keyboard key A2 not working with Logic Pro 8

Hello
I was using an m-audio keyrig 49 for a good 3 months, when all of a sudden the A2 key stopped working properly. The transport bar in logic shows that midi data is being received when I press A2, however there is no velocity value. The key only makes a sound when I'm going from another key to it, and even when that happens there is a sustain effect on the note, which aren't on any other keys.
I have tested this on midi keyboards from m-audio, novation, and edirol... keyboards that require drivers and keyboards that don't require drivers.
Any ideas?

Try redefining the key commands. Sometimes they can be a little flaky when importing earlier key commands. Redefining them might "unstick" them...

Garritan, Aria Player not working with Logic Pro X

heading says it all. Spent all day downloading latest Arai PPlayer and Logic will not recognise...
Currently ARIA works with Windows 64 bit, but not yet with Mac 64 bit OS.
There is this in the pdg Manual...
Steve

Sorry, that's the only option I didn't cover in my answer - I should have said: fades only work on unflexed audio regions that are not in take folders.
You can create a comp, export or flatten that and create takes on the exported track/regions, but you can't create fades inside take folders.

Export audio to video AAC not working in Logic Pro X

Hi
Anyone else have this.
When I choose to export audio to movie, and select AAC, it exports but when I chack the file, it has actally used PCM.
Regards
Keef

Did you ever manage to get this figured out?

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

Bounce not working in Logic Pro 9.1.7

Similar Messages

Maybe you are looking for