Bounce with effects

Hi Forum
i've a 6 part vocal line and one each track via bus a reverb.
When i do bounce in place i get a dry track without.
What is the banal basic procedure for bouncing with effects.
addendum : I dont want a full bounce I want the 6 traks separat but bounced...
Yours
B

Dear Erik
Thanks,
I've done that now...
Is this a stupid way to do work or is this simply not a normal way to use audio material...
i thought it should be quite straight forward
But thanks ;.)
yours
B

Similar Messages

Export multiple regions with effect

Hi guys,
I have some hundreds of regions of a vocal recording. I'd like to apply the same amount of reverb and compression to all these regions and export them all at once (mp3).
What I did: all regions in consecutive order on one audio track with insert effects.
I tried the export feature but it allows to export one region at a time even when I select all regions. This seems to be work for a week....
I'd also like to be able to define an additional length for the newly created regions, so the reverb would not be cut off.
When I export from the audio bin it doesn't include the effects.
I also tried creating markers from the original regions, bounce the whole track and then...? Is there a way to cut the bounced filed corresponding to all these markers?
Thanks for help,
Eddie

How many 100's?
Reimporting the regions will give you the option to put them on seperate tracks....you can do 50 or 100 at a time... Logic will put them on seperate tracks for you... don't import from scratch or Logic might have to redraw the overviews
Make a channel strip of the desired pluggins...
Adding a channel strip to 100 tracks takes about 15 minutes...depending upon which pluggins you are using, you might run out of system resources
then export all tracks as audio
I'm thinking 300 audio files with effects could be created in about maybe 3 hours...unless they are over 1 minute each, or you have system resource issues
Of course, I have to add every 15 minutes checking the forum, so make this at least an 8 hour job!
Message was edited by: Scott Roewe1

How can I create a video with effects using my ipad?

How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad? I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
Thanks

Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
Apps:
iMovie
CinemaFXV
VideoFix
Cartoonatic
Video illusion
VidEditor
Software:
Windows Movie maker (wont accept .mov files)
After Effects (Too little time, so much to learn)
Wondershare (Very easy but little choices)
VideoPad (Again. Few choices)

My iphone doesn't show me the effect on picture that are taken with effect is shows me it as a normal pic with out any effect but when I press edit it shows that the effect is already on but u can see it

my iphone doesn't show me the effect of the picture that Are taken with effect it just show them to me as a normal picture with out any effect and when I go to edit it shows there that the pic already has an effect and when I see the picture in group it shows that it has effect only when I tap on one to see it larger the effect disappear

I'm having the same issue, i restored my phone to Factory settings, even tried restoring it to my backup, half of my music bought from itunes won't play on my iphone and i'm super annoyed, this only happened once i updated to ios 7.2 so i assume its another glitch to go with my imessages not sending, getting sick of this.

GL Trial Balance Report with Effective Dates as Parameters

We have a requirement to show the GL Trial Balance report with Effective dates as Parameters.
Current Analysis:
The Journals get updated with corresponding CCID in GL_BALANCES table when the Journal is posted. GL_BALANCE is SOB specific, if the SOB has month as period then the balances in GL_BALANCES would get updated against the month(period).
To overcome the period problem, we explored the option of using a View based on GL_JE_HEADERS and GL_JE_LINES for 'Posted' Journal Batches of a SOB. We are checking whether the GL_JE_HEADERS.default_effective_date lies between the :p_from_date and :p_to_date which is sent to the Report as a parameter. The above idea does not return expected data when the custom Trial Balance Report is run.
Following is the Query being used:
SELECT cc.segment4 ACCOUNT, bal.code_combination_id,
bal.begin_balance_dr
+ SUM (NVL (gljel.accounted_dr, 0)) opening_bal_dr,
bal.begin_balance_cr
+ SUM (NVL (gljel.accounted_cr, 0)) opening_bal_cr,
ffv.description,
(SELECT SUM (NVL (gljel.accounted_dr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
--AND gljel.code_combination_id =
-- bal.code_combination_id
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_dr,
(SELECT SUM (NVL (gljel.accounted_cr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_cr
FROM gl_period_statuses per,
gl_code_combinations cc,
gl_balances bal,
gl_je_headers gljeh,
gl_je_lines gljel,
fnd_flex_values_vl ffv,
fnd_flex_value_sets ffvs
WHERE cc.chart_of_accounts_id = :p_chart_of_accts_id
AND bal.currency_code = :p_currency
AND bal.actual_flag = 'A'
AND bal.period_name = per.period_name
AND cc.template_id IS NULL
AND cc.code_combination_id = bal.code_combination_id
AND per.set_of_books_id = :p_set_of_books_id
AND per.application_id = 101
AND :p_from_date BETWEEN per.start_date AND per.end_date
AND gljeh.period_name = per.period_name
AND gljeh.default_effective_date <= :p_from_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'JSWEL_ACCOUNT'
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND cc.summary_flag = ffv.summary_flag
AND cc.segment4 = ffv.flex_value
AND gljeh.actual_flag = 'A'
AND gljel.code_combination_id = bal.code_combination_id
GROUP BY bal.begin_balance_dr,
bal.begin_balance_cr,
cc.segment4,
ffv.description,
bal.code_combination_id
Kindly suggest if I am missing anything. I am sure that the great guns here can help me out.
Thanks
Sumit

suggest to create customize TB report.

Bounce with time stamp

hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
thx, w

Hi, Acmarie.
Thank you for visiting Apple Support Communities.
To see what time a message was sent or received. Drag any bubble to the left. Below, I have included the user guide which references this new feature on page 66.
iPhone User Guide
Cheers,
Jason H.

Outer join with effective date in peoplesoft query

Hi,
I'm trying to join two tables using outer join. Both tables are effective dated:
Dept_Tbl: dept_id, status, effdt
Tips_Tbl: dept_id, tips_id, effdt
Not all records in Dept_Tbl are in Tips_Tbl. I need to get all active depts and their most recent tips_id if they have one.
select a.dept_id, b.tips_id
from dept_tbl a, tips_tbl b
where a.status = 'Active'
and a.effdt =
(select max(a_ed.effdt) from dept_tbl a_ed
where a.dept_id = a_ed.dept_id
and a_ed.effdt <= SYSDATE)
and b.dept_id(+) = a.dept_id
and b.effdt =
(select max(b_ed.effdt) from tips_tbl b_ed
where b.dept_id = b_ed.dept_id
and b.tips_id = b_ed.tips_id
and b_ed.effdt <= SYSDATE)
The query only returns records that are in both tables.
Is there a way for outer join to work with effective dates?
Thanks in advance,
Reg

Here is an example of one solution. Note the use of NVL on both sides of the equal sign since both sides could be NULL in the case of the outer join
with dept_tbl as (select 1 dept_id, SYSDATE effdt FROM DUAL),
     tips_tbl as (select 1 dept_id, NULL effdt FROM DUAL)
select a.effdt
from dept_tbl a,
       tips_tbl b
where b.dept_id(+) = a.dept_id
   and NVL(b.effdt, SYSDATE) = NVL((select max(b_ed.effdt)
                                      from tips_tbl b_ed
                                     where b.dept_id = b_ed.dept_id
                                       and b_ed.effdt <= SYSDATE), SYSDATE);
EFFDT
5/7/2007 3:25:00 PM

Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

I am having incredibly long lag times when working with effects in Premier Pro CC 2014. Like 60 seconds or more. This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point).
I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3.
I have seen that some people are having different versions of the same problem. I do have RedGiant plug-ins, but I am not using any of them in this project. The Red Giant plugs (again, not being used in the project) include MOJO and Universe. The previous version most certainly did not work like this. Any ideas? I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences. Still having same problems.
A specific example is I have an interview shot. I add brightness and contrast. Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays. I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect. Same deal -- ridiculously long times for effect changes to take place.
Does anyone have any clues as to how to fix these problems?
THANKS FOR ANYONE'S HELP!!!!!!!

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Export clips from a sequence seperately with effects as a batch export in CS 5.5

Hi there,
I'd like to know if there is any possibility to export all clips from a sequence/timeline seperately with all applied effects as a batch export or similar in CS 5.5.
I know there is a chance to do that via the project manager, but a far as I know this way doesn't include the applied effects on each clip.
Thanks for your help in advance...
Marc.

The only way to export a single clip with effects is to manually set up each individual export. This applies to all version of PP.

Import text with effect

Hi
is there a way to import text with effect (like bevel and emboss) from Photoshop into Flash CS4?
Thanks

You are more likely to get an answer if you ask in the Flash forum (this is the Flash Player forum).

How to get textItem width with effects by using photoshop script

HI，guys
Is there any one met the same problem? I want to write a script can generate pics according the text content size dynamically, but I cant get the actual size of textItem with effects.

#target photoshop-70.032
var bounds = activeDocument.activeLayer.bounds;
alert (bounds[2]-bounds[0]);
seems to include Layer Styles like Outer Glow.

CT differences with Effect to Net income

Hi,
I am running CT for the current month i.e July 2010.
For one of the company code (9019), it was showing two steps under differences as below:
CT differences without having effect on Net income: XXX amount
CT differences with EFFECT on net income 1200 USD
Our group currency is USD
For all the months it will have postings like above, but with effect on NET income will be negligible i.e. always less than 1 USD. so there is no issue.
Now when I look into the balances using total records, the PNL items (All accounts) are equal to Zero in LC.
But In GC is showing the balance which is equal to USD 1200, exactly same amount as "CT differences with EFFECT on net income "
Could someone explain what is CT difference with effect of Net income and why PNL items in GC are not equal to zero.
Thanks in Advance,
Richard.

Hi Dan,
The issue is resolved after following the steps provided by you.
Also i have done one more mistake of assigning account type balance sheet instead of PNL in fs item, so it was mis leading the results.
In fact the issue is because of wrong accont type. But the solution provided by you works 100% but in the next period again i faced the same issue.
After correcting the account type the issue is resolved. Also executed previous month process again for better reporting.
Thanks a lot for your help provided. In the entire project you have helped a lot.
Many thanks for your support.
Regards,
Richard

Imovie Recorded with effects....

Ok, so I was tasked with recording 2 90 minute presentations. Simple job, one camera plugged into my laptop with a firewire cable and iMovie set to import. Worked great for the first presentation. File looks good, no problems. A few hours later, same camera same settings and iMovie recorded to the disk the video with effects being added on a rotating basis, pixelated, shaking, sepia ect ect rotating around every 10 minutes or so. I saw it while it was happening but figured it was just doing that to the video I could see and not the files...
As you can guess, it recorded that to the file so when I play it back it plays with the rotating effects. Am I doomed or is there any way to get those off? I really need to salvage the whole presentation....
I assume I'm doomed but thought I'd ask
Robert

It can't possibly be the same settings.
Did you on the second occation start a "Magic Movie" instead of a "New Project".
Did you set the camera to a sort of "Demo" mode?
Did you record to tape at the same time? Is the tape OK?

Need to create a textinput with effects

I need to create a textinput with effects- it should show a blue icon infront of it when the icon is focused and the blue icon should fade afterwards. I am pretty sure I need to use skin but the problem is I have only two states with textinput control and not sure how I would use those to ensure a handling mouse hovering effect. Right now I am not able to create a custom component bacuae I have to modify the whole code wherever there is textinput control.
Thanks in advance.
Rachel

You might find this blog post useful: http://flexponential.com/2010/01/24/custom-focusskin-for-spark-components-in-flex-4/

Paint with effects

Paint with effects with Photoshop Touch
Make the subject of your photo really stand out by painting your images with special effects.
1. After selecting the "Paint with Effects" tutorial, press "Begin Tutorial" to start. Tap and drag to select the Effects paint tool.
2. Tap Mode > Effect to paint with an effect instead of color.
3. Select the Black & White effect
4. Reduce the brush size to about 30
5. Paint everything but the horse to make the entire background black & white.
6. Now select the Saturation effect.
7. Increase the saturation to 100%. Tap OK.
8. Paint only the horse with the saturation effect to enhance its color.
9. Tap the back arrow in the top options bar. This will prompt you to save. Press Save to save your project.
Download the attachment to view this tutorial in PDF format.
Janelle

I tried to make this tutorial, but the saturation tool does not work. Instead of saturating the colors, the filter of the alters. As an example, instead of making the brown horse, turns a greenish color. My tablet is a BQ Edison. Everything else seems to work fine except this filter.

Bounce with effects

Similar Messages

Maybe you are looking for