Bounced song always comes out the same volume

One of my songs is exporting too loud, so I tried lowering the master volume in the mixer but it still results in the same loud volume. What is causing this and how do I fix it? TIA!!!

Turn off "Normalize" in the bounce menu?

Similar Messages

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

I'm trying to get the image to print correct size. i've tried center image, fit to media image, and they all come out the same size...smaller than the size in "image size". is this an Epson problem or Photoshop problem. Thanks!

I just got a new printer...Epson R3000...but have had this problem before. It's probably a simple fix, but I can't figure it out. I'm asking for printing on 8.5 x 11 and the image comes out 6.5 x 9.5 every time. Help please! And thanks!

The Epson site stated that the R3000 printer can print borderless however the quality will suffer in the expanded print area. Borderless is not supported on some heavy paper. To me the means your better off limiting you images size to the standard print area. There will be magins about 1/8" on the four sides so the print area on 8.5"x11" paper is 8.26" x 10.76"....
Take note of the print size set by the epson driver it may change depending on the paper type set. Note my first epson 4800 setup where I set 8.5" x 11" sheet paper from tray into the printer setting the driver set a smaller size for the paper which was reflected into the Photoshop Print preview. It shows paper is 8.499" x 10.999 with a small unprintable area across the top....
Paper
Use paper under normal conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single-sheets
Size
A4 (8.3 × 11.7 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
4 × 6 inches
5 × 7 inches
8 × 10 inches
11 × 14 inches
12 × 12 inches
Half Letter (5.5 × 8.5 inches)
B (11 × 17 inches)
A3 (11.7 × 16.5 inches)
Super B (13 × 19 inches)
Paper types
Plain paper
Special papers distributed by Epson
Thickness
0.003 to 0.004 inch (0.08 to 0.11 mm) in the sheet feeder
0.012 to 0.051 inch (0.3 to 1.3 mm) in the manual feed tray
Weight
17 lb (64 g/m2) to 24 lb (90 g/m2)
Printable Area
Note:
When printing borderless, quality may decline in the expanded printable area. Borderless printing is not supported with poster board.
Sheets
Top: 0.12 inch (3 mm) minimum
Left: 0.12 inch (3 mm) minimum
Right: 0.12 inch (3 mm) minimum
Bottom: 0.12 inch (3 mm) minimum
Roll Paper
Standard margins
Borderless printing margins
CD/DVDs
Caution:
Avoid printing in the clear plastic areas of your discs to prevent staining the disc with ink.

N82 - 4th time repair...always comes back the same...

Hi, I really don´t know if my post fits well in here, but I´m getting bored about the repair service that has been made to my N82, and I hope I can get some help in here.
My mobile phone only has 6 months and when it reached the first 4 months started to heat a lot, even when turned off. The battery only lasts for 5 hours and then the phone just dyes. I took it to my Nokia distributor in Portugal and today I´ll take it there again for the 5th time to go to repair... Last time I pick it up from repair it was yesterday, and they say the phone went to the factory to be repaired 2 times, but it always comes back with the same problem.
I just want to know what can I do, because it´s a new phone and it was expensive, it´s an N82... can someone tell me what do I need to do so that I can move forward on this?
Do I need a miracle so that Nokia can give me a new phone or at least "really" repair this one?
Sorry if my frustrastion doesn´t fit 100% on this forum, but the Portuguese Nokia is not really helping me on this... and it hurts to buy an expensive phone from the top brand and cannot used it...at least I have my 7yr old 6210 which is still working as new!
Thank you...

You need to contact Nokia Care in your country (click on the "Contact us" link at the top-right of this page). Not a Nokia Care Point, but Nokia themselves, in order to put your case to them.
The Care Points are not run by Nokia but by third-party organisations operating with a Nokia licence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Mac book goes into sleep mode it won't always come out the keyboard lights up but the screen will not

it seemed to start after i updated to OS X lion.

I have this same issue. When experiencing this issue I connected a wired mouse and selected/reviewed bluetooth device status which showed blutooth devices not connected. Trying to reconnect and/or restart the bluetooth devices (keyboard, mouse, and trackpad) did not work. Only a reboot solves the problem. Reseting the hardware does not prevent this issue.
Apple support informed me that this is a known bug and they are working on it. There is a bluetooth issue with supporting three bluetooth devices that manifests after sleep. My work around was to use only bluetooth keyboard and magic mouse. This solves the problem. After each OS patch is applied (in future) I plan to check and see if the issue is solved. I did not upgrade yet to to patches released in Feb. 2012 - so it might be fixed there (as part of the wifi sleep issue solution).

When i create genius playlist the sort album columns always comes out how can i remove this?

i dont know how it got included in the generated playlist when i click on a song but the sort alum column always comes out. How can I edit the columns included in this genius generated playlist?

Generally setting a common Album title and Album Artist will fix split albums.
For compilations of tracks by different artists set the album artist to Various Artists and also tick Album is a compilation of songs by various artists if using the new version of Get info or set Part of a compilation to Yes on the Options tab if using the old dialog box (which you can invoke by holding down shift as you right-click > Get Info).
For deeper problems see Grouping tracks into albums.
tt2

ICloud keeps asking my password and it always comes out incorrect even though i know i input the right one. When i tried to reset the password by email, nothing was sent to me. Tried it again thru security settings, they asked for my birthdate but st

Please help!!! iCloud keeps asking my password and it always comes out incorrect even though i know i input the right one. When i tried to reset the password by email (many times already), nothing was sent to me. Tried it again thru security settings, they asked for my birthdate but still, it's incorrect! anyone have the same problem?

Hi,
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID Account Security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

Hi. I'm using illustrator cs6 on pc. I've made a scientific figure for a paper and now I'm trying to export as a png or save for microsoft office. Despite my figure being in the middle of my artboard, it always comes out bottom left in the png file or jpg

Hi. I'm using illustrator cs6 on pc. I've made a scientific figure for a paper and now I'm trying to export as a png or save for microsoft office. Despite my figure being in the middle of my artboard, it always comes out bottom left in the png file or jpg. Must be making a school boy error! Please help!

In similar cases, my solution is to "select all" then "deselect" only the artwork I want to keep and "delete". If I'm curious I may "cut" then "paste" to see what shows up in the center of the screen. it is usually some stray point. or other element out direct sight.

TS3297 itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same

I just purchased itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same error message. Somebody has to have an answer to this.

Did you try setting itunes to run with administrator privileges?
Since I changed that I no longer have this issue

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

HT1399 How can I modify my playlist so all songs play ay the same volume?

How can I modify my playlist so all songs play at the same volume?

mlagrandeur wrote:
How can I modify my playlist so all songs play at the same volume?
Turn on iTunes Sound Check, which you can do by going to Edit > Preferences > Playback and checking the box.
Let us know if that does the trick. If by any chance it does not, use the 3rd party program iVolume.

My Itunes library is skipping some songs which is also affecting my ipod, it is always the same songs that skip at the same place, it is not all songs.

Since moving my Itunes to a Vista, it found songs that I downloaded a long time ago and added them to my library but now some songs (not just the ones that were lost in apple land) are skipping after playing a few seconds then it moves onto another song. The same songs are skipping at the same place when played on a computer and also my ipod.

i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

I would start with some basic troubleshooting.
REPAIRING DISK PERMISSIONS -
NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
- click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it. Then double click on 'Disk Utility'
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'Repair Disk Permissions'
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html. Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
- restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
- select english as your main language then the continue arrow
- select "Disk Utility" on the resulting screen then 'Disk Utility' ---
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays "The Macintosh HD appears OK".
Once done, restart the computer as normal

Bounced song always comes out the same volume

Similar Messages

Maybe you are looking for