Bouncing files in Logic Express 9

I am using Logic Express 9. I brought some GarageBand files into Logic to mix. I then bounced the mix to an AIF file for mastering. Later I decided I didn't like the mix and decided to remix the song. I bounced the new mix to a new AIF file but the new AIF file still plays the old mix. I even trashed everything in Logic Express and went back to square 1 and started all over again. But every time I bounce to an AIF file it still plays the old mix.  Why is this happening?  How can I get it to recognize my new mix?  Please help.
Thanks in advance.

Hi, assign a new name to your new bouce, like "project1.aiff" instead that "project.aiff",
Then rename if you want to call it as the past bounce. cheers

Similar Messages

  • Import midi-file to logic express 7

    hi there
    i'm trying to import a midi-file to logic express 7.
    always when i import it, there comes a window with "new smpte-frame rate". when i click ok, it doesn't import anything... what can i do?
    ps: sorry for my english!

    thanks, it works with some midi files. but when i'm saving a file in finale 2007 as a midi file, it doesn't work... i checked the sync prefences and they don't look wrong... it's really strange!

  • Using non apple wav files in logic express 9

    Does anyone know how i can use non apple files in logic express 9.i have put them in Bin but cannot get them to play via my midi keyboard.thanks

    chazbass wrote:
    Does anyone know how i can use non apple files in logic express 9.i have put them in Bin but cannot get them to play via my midi keyboard.thanks
    Actually i am not sure i really understand your question because it seems to me that in your subject heading you are asking about " wav " files which are audio files but in your message you refer to playing those files via your midi keyboard which indicates you are trying to play " midi " files and not " audio " files.
    If you want to play a audio file:
    Create and audio track in a project and the import the "wav" file into that audio track and it should play as an audio file when hit the play button in the transport controls.
    Please clarify what type of file you want play using LExpress 9 to give us a better idea as to how to help you.

  • Transfer Digital Performer files into Logic Express?

    I have some old recordings that are on a ADAT tape. A friend of mine said he could transfer them to Digital Performer. Does Logic open DP files?
    Paul

    Unfortunately, as was pointed out, Logic Express does not open Digital Performer files.
    Not does it import OMF files, nor Broadcast Wave files, which means you can't export time-stamped waves from DP and import into LE. If you know someone with Logic Pro, it DOES support Broadcast Wave. This could be one work around.
    Otherwise, you'll have two options.
    1) Import the ADAT recordings directly into LE using an interface that supports ADAT In (MOTU 828mkII comes to mind). This will only work if you can re-assign the inputs of the interface to be the first 8, since LE only "sees" the first 12. This is one of the major limitations of LE, and why it's not really suited for "pro" work.
    2) Import into DP, and then bounce the tracks in DP as separate WAVE of AIFF files, then import them directly into LE in the Audio Window. As long as each file starts (and ends, preferably) at the same time (i.e. as set in the DP bounce), you should have no problem aligning the tracks in LE7.
    Number 2 is probably the best solution. Just remember that each of the WAVE files created in DP should begin at the same time (i.e. 0 0 0 0). This will GREATLY simplify the import into LE and make aligning the tracks a painless procedure. You can edit later in LE.
    Hope this helps.

  • Master volume adjustments aren't translating when i bounce projects from Logic Express, any tips?

    hi folks!
    whenever i bounce a track from Logic Express it's always significantly quieter than any other aiff, mp3 or wave file i have, including those that i have bounced from garageband. Even if i crank the 'master' volume in the mixing window, it sounds loud in Logic, but  the bounced file is a big 'wanh wanh' and has absolutely no change in volume.
    i must be doing something stupid.
    is there another place i can adjust the master volume that the bounce will read?
    does anyone else have this problem?
    i'm pulling out my hair.
    any suggestions would be very welcome!
    thank you!

    Hi,
    first of all: The "Master" Fader is for trimming your mix to your monitors only. The bounce will be taken from the "stereo output" channel, so look there for the correct volume.
    Now for the loudness issue: Garageband has kind of a built in foolproof bouncing. Normally, you would have to adjust not only volume to be an loud as you wish, but you have to insert some plugins into the stereo output channel to ensure that the signal doesn't get any louder than 0db, because this will produce clipping and with raising volume, distort the sound. But:
    You can raise the volume if you insert the LIMITER plugin as very last plugin into the stereo output channel. Make sure it is the last plugin so there are no changes to loudness after it, not even an eq!
    Any change of loudness before the limiter will be limited (hence the name) to a maximum of 0db by default (you can change the value - i use -0.1 db just to be sure.) while the softer parts of the music are being raised in loudness. If you listen to it, you'll notice the whole song is louder without distorting. Of course, if you overdo it, you'll hear the squished dynamics. Experiment!
    Garageband seems to have a built in preset to perform these tasks fairly well. In Logic, you have the freedom of using or not using these settings and to customize them, which is quite normal for a pro tool.
    Fox

  • Can't open any files in Logic Express 8

    Hi out there,
    I just installed Logic Exp. 8 out of the box. Runs nice as far as i can tell, but has a major bug with me: It won't open any projects or other files.
    If i click the Projects in the Finder, they will open just fine. But I can't open them in Logic.
    Import of Files into a project works fine.
    Ideas anyone? Update anyone (wink, wink to apple)?
    Cheers,
    Fox

    You may be having the same problem I observed, and I think it may be a bug.
    After upgrading to Logic Express 8, when I save projects they appear as a folder rather than a file in the finder, with the .logic suffix. Previous versions saved projects as a .iso file. On another machine I upgraded Logic Pro to Logic Studio 8, and here projects are saved as a .logic file. My guess is the .logic file created is supposed to be a file for both Logic Pro and Express, with package contents under OS X ... but for some reason this is appearing as a folder when created by Logic Express, with the package contents visible ... so you can't double click on anything to open them.
    Has anyone else seen this? is there a workaround or is this a bug?
    In the meantime, note that you can launch the Logic Express .logic 'folders' by dragging the and dropping the entire .logic folder onto the Logic Express icon in the dock.

  • Opening Garage Band files in Logic Express

    I'm a school music teacher and have just started using Logic Express 7 to open kids' Garage Band files for tidying up and polishing.(Still a beginner with logic I'm afraid!) Have just purchased Logic Express 8 update, but haven't installed it because I heard that it won't open Garage Band 3 files. Is this true? If so, is it possible to have both 7 and 8 running independently on the computer? Any suggestions would be greatly appreciated.

    The original release of LE8 had a bug which required a workaround to open GB files. The subsequent 8.0.1 update fixed that. After you install LE8, go to Software Update and install the 8.0.1 update and you will be fine.

  • Garageband Files on Logic Express and vice versa

    My daughter uses Logic Express at school (sorry, I don't know which version). She has been trying to do her homework on our eMac (OS 10.3.9) using Garageband 1 and her M-Audio midi/usb keyboard via USB.
    Her teacher says that Garageband files should work fine with Logic Express and vice versa.
    The problem is they don't. We have tried importing files, also saving in one programme and opening in the other - all to no avail.
    Presumably we are doing something wrong somewhere. Does anyone know how to get Logic Express to use Garageband 1 files and vice versa, please?
    One more point of information, she saves the files to a 'PikaOne Slim Flycase' 40gb Portable HD to take to school to use on an Apple Laptop type computer (Powerbook?). Both home and school machines appear to be working perfectly with this device.
    She also has some software called 'Logic Hit Kit' but I don't think this is has anything to do with Logic Express. It's files do not work with Logic Express either
    PM6500/300 (603e)   Mac OS 9.1.x  

    That is correct, and you still have your level
    status, it just doesn't show. I read in The Lounge
    (for level 4 & 5) that they were planning to return
    the level status and custom icons to the forum. But
    it has been a long time now, and they haven't. I miss
    my custom icon
    Yes, apparently they intend to at some point. But, they have more pressing things to attend to first, so it might be a while. I have discovered that there's a special forum about this.

  • Opening GarageBand files in Logic express

    I cannot get my GB files to open in logic express. It says i need to update logic. I have Logic Express 9 and GarageBand 11. Anybody know why it's doing this?

    KhakiNinjaOtter wrote:
    I cannot get my GB files to open in logic express. It says i need to update logic. I have Logic Express 9 and GarageBand 11. Anybody know why it's doing this?
    Hi,
    Have you tried running Software Update...
    Cheers,

  • No sound when i import garage banmd files into logic express 7.1

    i have garage band 3.0.4 and logic express 7.1. i just acquired both of these recently and have been trying to transfer my old garage band 2 files into LE. i have no problems putting my songs into garage band 3 but when i open them in logic theres no sound output. everything appears to be working, all the meters light up except the output master all the way at the end of the mix window. i dont get it. some of my GB2 files opened in LE with no problems but others, made with gb3 or exported from gb2 to gb3, wont work. i messed with the preferences, the sound is set to core audio but im still perplexed. anyone else had this problem? help!

    thanks, ill give it a try. ive noticed that i dont have any problems when i open my GB2 files directly into LE. its only when i go through GB3. its really a drag, because i just updated and it seems theres no going back. pretty disappointing if you ask me. i updated to GB3 because of its much hyped "resolutions" of old problems, and here i am stuck with new problems. bah! thanks for the help anyway. if anyone knows of an easier/more efficient way to deal with this issue, let me know! thanks again.

  • Garageband3 files and Logic Express 7.1.1

    I gather there's a problem bringing GB3 files into LE 7. (I know I'm having a problem. They seem to import OK -- well, except for the error message about a missing plugin -- but then when I hit the play button, I don't get any sound. GB2 files don't seem to have that problem.) But exactly where is that information stated plainly and simply for those us who are very new to LE? I've been searching this site now for an hour and all I found was one post that said something like "you know by now that you can't open GB3 files in LE," which confirms that there's a problem, but it isn't precisely true. (They do open. I just can't do anything with 'em afterward.)
    So the question -- is there any plainly stated information on this site about problems with GB3 files and LE3? And if so, where? I'd like to know what the story is.
    PowerMac G5 2.3 GHz / PowerBook G4 15" 1.67 GHz   Mac OS X (10.4.3)  

    I am pretty new to Logic Express, so please bear with me while I mumble...
    I found that when importing GB-3, Logic brings in all tracks set to have no output. Going through the tracks and giving each of them Output1-2 instead of a bus in their I/O section made everything seem to work fine.
    Powermac G5   Mac OS X (10.4.4)  

  • Can I use LogicPro .plist file with Logic Express?

    I've set up a whole bunch of nice keystrokes in my Logic Pro.  I want to give them to a buddy who is only in Logic Express (which may not be possible I know).  These took me hours originally to set up ... and when I go to his Logic Express the keystroke assign window seems to be different from the time when I originally created the keystrokes (I've been transferring the .plist file through the last two versions of Logic).  So it would take me a lot of effort to reassign the keys in his Express.  Is there any way the preferences can be transfered from the Logic Pro to the Logic Express?
    All ears,
    Ben

    Hi
    You can export keycommands from within the Keycommand window (under the Options Menu in the KC window).
    You can then import them into Express on the other Mac.
    CCT

  • Opening a Logic Pro file in Logic Express

    Hi my Nephew is thinking of buying Logic Express (He can't afford Logic Pro) so we can collaborate together on some toonz. Now if I send him a song I have created in Logic Pro will it be OK for him to open in Logic Express to work on that song?
    What will have happened to all the parts that I have created on the instruments in Logic Pro which are not available in Logic Express? would it just be MIDI notes/ data? and vice versa.
    Many Thanks

    Hi there...
    When i'm in the studio I work with LP7, but on the road (and its more often then not) I use LE7. This 12" powerbook 1.5gz w/ 1.25mb 80hd has the FULL LP7 install and the FULL LE7 install, as well as lots of Garageband loops, and most free, AUs.
    In Express (with a LP7 install, on the same machine) the ONE thing that is poor, is opening a LP7 project that leverages PLUGS for LP7. But that's ok as Sculpture and all those other goodies are too cpu hungry for a single G4 (IMHO).
    So you will not get those working, BUT, with a real LP7 install the EXSp24 can OPEN the instruments from the much much larger library of material inside LE7. It's kind of like Logic Express-PRO...sounds strange i know.
    Oh, and don't forget that LE7 need to really be the 7.1.1 version as that one adds the HybredMorph inst from GB. Keep your bus counts down and no auxs in the LP7 sessions if you KNOW a LE7 users will pop them open
    YMMV... but Good luck.

  • Logic express & pro file diffrences

    im sure that its possible to open LE files into LP but is it also possible backwards? (open logic pro files in logic express)?

    Yes, it should be possible.
    But be warned that Logic might not find all the plugins needed, so you'll have to replace them with substitutes of lower quality. Example Space Designer -> Platinum Verb. Or EVB3 -> EVB.
    Fox

  • Logic Express 9 and and  Boss RC-30 looping pedal--incompatible?

    I recently purchased both Logic Express and a Roland Boss guitar looping pedal, hoping to use Logic Express to create/edit loops for the pedal. But when I tryto import them to the pedal (via USB), I get an error message of "unplayable file". The manual for the looping pedal states that the wav files must be in the format wav, 16-bit linear, stereo, with a sampling frequency of 44.1 kHz. I am able to match all of those in the "Bounce" export dialog, except I don't see an option for linear--only "interleaved" or "split". And I'm not sure how to tell if I'm exporting a mono or a stereo track, but I think that since my signal goes on both sides of the line in the arranger window, that it is stereo. Has anyone been able to get this to work? I'm thinking the issue is that I need a linear rather than an interleaved file.

    Have been really busy, but finally tried your suggestion. Logic Express seems to be able to export WAV files only as interleaved or split into two tracks. My Roland/Boss looping pedal says "unreadable file" for both flavors. After much experimenting, I did finally find something that will work. I have to first export my file as a 16 bit (interleaved) stereo WAV file from Logic Express. Then I have to open the file in Audacity, and re-export it as what Audacity calls a 16 bit Microsoft WAV file. Then my pedal reads the file just fine. I'm disappointed that Logic Express won't export a file that is readable by the pedal, but at least I found a work-around.

Maybe you are looking for

  • How to install and use endnote?

    I have a problem using endnote in pages in order ti insert bibliografic references. I purchased pages from the app store and in the resources web page i was able to notice that i had to download and install it, so i did but it didnt work furthermore

  • Problem with SQL query pulling info out of a collection

    Here's my issue, I use a PL/SQL query to pull info from an XML file and put it in a collection. I then query the collection with a SQL statement to pull the info from the collection and put it into a table. I can see that the collection is being crea

  • Help with "distint count" in query

    Hi I have a query that returns the following error: ORA 00936: Missing Expression and also after running it again I get ORA 00900: Invalid SQL statement. The query is as follows: SELECT         DISTINCT student_id,         COUNT(student_id),        

  • ROCANCEL Field problem SD 2LIS_11_VAITM

    Hi I am facing a problem in which one SD report i am getting few sales order which are cancelled in R/3 but still coming in my report. I checked in 2lis_11_vaitm and there is no value coming in ROCANCEL field. 0STORNO is reversal indicator but there

  • "About" Window for Plug In in OS X

    Hello, I can edit the text inside the "About" Window for Plug In's in Photoshop under Windows. I was wondering, how can I have an "About" window for plug in's in OS X? Is there any sample code with working "About" window in OS X which I can edit its