Bouncing individual tracks

Hey, I have just finished a CD and I am trying to bounce the songs one by one...Thats not the problem the problem is that the CD is somewhat of a compilation in which every song mixes with the other as it could be a one hour single track. I am trying to put in like a mark or a division to identify where the next track should begin. For instance the first song on the CD will have audio from two different tracks and when i tried to merge them it delayed. I just want to be able to easily do it.

Bounce the whole thing down into one track and then import it into Waveburner. There you can set "start points" for the songs.
I think the better way to do it, however, is to take each individual song out and place them in Waveburner. There you can easily shuffle them around, add mastering tools to individual regions and burn CDs from there.
My 2¢

Similar Messages

Bouncing individual tracks creates 2 wav files for each..why?!!

When I bounce individually selected tracks from Logic Express, it creates a double wav file in my folder for each track I bounce. It didn't use to do that and I haven't changed any settings... Please HELP :/

By "double wav" do you mean that you are getting a separate audio file for left channel and another for right channel, something like this?
Be sure to check in your bounce window that you have "interleaved" checked instead of "split."
Depending on how you're exporting/bouncing your tracks this may not help, but you can always solo the desired track and bounce your song with "interleaved" selected to get a single stereo file of that individual track.

Bouncing individual tracks in mono

I'm currently working on an album, and I'm soloing and bouncing all my individual tracks so my friend can open them in his protools. The problem is, all the tracks come out stereo. Any help would be appreciated. I'm running Logic Pro 8.

I don't know if others are affected by this, but any track panned to the right is not bounced - effectively the master mono function just disables the right channel rather than summing to mono.
Let me know if this is the case in general so it can be reported...
Cheers

Exporting individual tracks

Hello everyone,
If this has been discussed somewhere else I apologize, I wasn't able to find this information.
I have recorded an ep for my band in logic express 7. We are planning to send it off to be mixed. THe problem is they will be mixing on pro tools. is there an easier way to set this up for them then just bouncing each track one at a time. Is there an export for all tracks individually on LE7? I saw on the forum that freezing tracks would work. does this make a copy of the whole track length of each each track even though there is different sections? Any help would be greatly appreciated.

Here is the question.
I have recorded an ep for my band in logic express 7. We are planning to send it off to be mixed. THe problem is they will be mixing on pro tools. is there an easier way to set this up for them then just bouncing each track one at a time. Is there an export for all tracks individually on LE7? I saw on the forum that freezing tracks would work. does this make a copy of the whole track length of each each track even though there is different sections? Any help would be greatly appreciated.

How can I change the tempo and pitch of individual tracks on Garageband 10.0.3?

I just recently started using Garageband 10.0.3 and it's been updated completely, which is good in some ways. However, many things have been cleaned up and/or hidden and it's taken me a while to find certain tools or do certain things.
I've been trying to change the pitch of tracks in my project and it's taken me forever to find out how, but eventually I did. I think, though, that it changes the pitch of the whole project? (I changed the pitch by using one of the plugins, I think it's called AUPitch?) I have to double-check that, but that's how I've been changing the pitch of the tracks.
To the bigger problem... Tempo. I have searched for a good 2 hours trying to find out how to change the tempo of tracks individually and I'm really frustrated. I tried the BPM solution (changing the BPM at the very top), but that seems to change the whole project. I just want to change the tempo of individual tracks, not the whole thing. Is it even possible now?
I'm really considering using a different program. Hopefully this is just me being slightly clueless and not Garageband's fault.

The AuPitch filter will work on individual tracks, no problem.
But you can change the tempo only for the entire project with the global tempo setting or the Tempo Track.
As a work-around: To change the tempo of individual tracks solo each track, change the tempo, then bounce the track as an audio file and reimport that audio file with the changed tempo to an audio track.

Burning mixed 5.1 songs to DVD-A as individual tracks?

Hi All,
A noob around these parts and to Logic Pro 9 so please be gentle
After a fair bit of looking online I can't find the answer to my particular problem, which is...
I have recorded & mixed a jazz band in 5.1 on Logic Pro 9.
I have bounced the whole session as a 5.1 DVD-A disc with no problems but I want to be able to have each song as an individual track, not one long track with no breaks.
Is this possible to do in Logic 9 Pro or do I need another 3rd party bit of software?
Any help much appreciated,
Jon

Hi, noisyjon.
Can you select each track as a separate region and use save as to write them as in dividual tracks. Another way is to use the locators ans select how much of the full track [the entire dvd] you want to bounce and save that file.
ie. say track 1 is from bar 0 to bar 71. select that in your bounce menu and logic will only bounce that portion of the project. You can also name it whatever you want in the bounce drop box. Repeat for each track.
Hoe this helps,
Regards,
Scorpii.

How to show individual track information (like in the old iTunes) of a single artist (or that artist's album) without all the noise of every single other artist close in the alphabet?

The new iTunes has truly added extra visual noise.
I am trying to view a single Artist and the individual track information of that artist. This used to be how itunes was, you could click on a single artist and then the tracks would all have their various categories.
I can still see this but only in the "songs" category and in that I have to see every single song or artist alphabetically.
How do I simply see the artist, and that artist's tracks, as well as the different info about that track I want to see, such as "name, track #, time, year, genre, bit rate, kind, etc."
Please don't counsel me on what information I need to see, or suggest that I stop caring about this, or ask me why I want to see this various info.
It was simple and accessible in the older version and I would probably stop complaining to all of my friends about the latest version of itunes if I can see this old format.
Or... is there a way to re-download the old version? It's okay that you've made mistakes, every company makes mistakes, if I can revert to the old version that would be great.
Thank you.

Select the Songs tab, then under iTunes Menu select View then click Show Column Browser. You will see the familiar GENRES ARTISTS ALBUMS header, click on one artist and you will have only the artist's albums and songs showing in the window below with all the specific info you selected under View options. If this is not what you wanted, simply reply with a nice "no thanks".
Search this forum for instructions to reinstall iTunes 10.7, there are quite a few posts explaining the process.

Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

HT1473 I purchased a cd and downloaded to my itune library, but I can not see it as an ALBUM, only individual track?

I purchased a CD and downloaded all the 16 songs in Itune Library? When I went to my Itune to open the album of 16 songs, instead I saw 16 individual track with no name or title? I don't want to see individual track, I want to see as an album. Can any one help?
Thanks
Mark Moradoff
email:[email protected]

Not sure what would cause that. Try deleting all the songs and re downloading them.
From iTunes Store go to Purchased in Quick Links on the right.

How do I bounce a track to include the... lead in?

Sorry I didnt know how best to phrase the question. I am implementing music into a game in unity, and due to technical limitations, I need a track that serves as the introduction, and another one that starts at measure X for the purpose of looping.
Is there a way to bounce a track, say, starting at measure 4, where it includes whatever audio would still be "left over" from previous measures (release trails, reverb, etc). The only way I know of is to bounce it from the beginning and manually chop off the audio, but I'd like to avoid that if possible.
Hope that made sense.

Hi
Maybe the Bounce checkbox "Use 2nd Cycle pass" will help... but it may depend on the material
CCT

Cover Flow w/ Individual Tracks

I have a number of singles in my library with no album info listed. When I view in grid or cover flow, each individual track shows up with the generic iTunes icon as cover art.
Is there a way to either:
a) consolidate all the singles for each artist so that they only show up once in grid or cover flow views, and/or
b) select if you want certain tracks/albums to be hidden in grid or cover flow views?

Some albums may not be what would normally be called a compilation album (e.g. Now That's What I Call Music Vol X is a compilation album), but might have tracks with differing artists. The classic example is Queen's Greatest Hits III.
Microsoft of all people came up with a good idea on how to cope with this which is an additional meta tag called "Album Artist" which is different to the individual track artist. Using the same Queen's Great Hits III album example, the entire album would by any sensible person be considered to be a Queen album but track 2 (Under Pressure) of that album is jointly by Queen & David Bowie (not just Queen).
I (and I presume others) requested Apple add support for this Album Artist tag and it was indeed added in iTunes 7.0. Unfortunately in my opinion, Apple's implementation is not as good as Microsoft's.
Apple in iTunes do not let you browse by Album Artist at all, nor do they let you properly sort by Album Artist (in my opinion this sorting is broken).
I direct you to this other older message thread http://discussions.apple.com/thread.jspa?threadID=843028&start=15&tstart=0 in which you can see a screen capture by myself listing just two albums - Queen's Greatest Hits II, and Queen's Greatest Hits III. Despite the fact that I have filled in all the tracks to all have the identical Album Artist entry (of Queen), you can see Coverflow incorrectly breaks it in to two copies of Queen's Greatest Hits II, and three copies of Greatest Hits III.
The only way I have found to get iTunes to correctly group all the tracks of an album together is to use any of the three sorting by Album name options (all accessed by clicking on the column heading called Album).
Note: Microsoft do let you browse and sort properly by the Album Artist tag in Windows Media Player.
[I suppose Microsoft have to get something right eventually!]

Creating albums and moving individual tracks

I have quite a few compulation CDs that were created in the mid to late 80s and when I imported them into my iTunes library they were imported as individual tracks with no MP3tag info. Is it possible to create an album and move these individual tracks in that newly created album? I know that I can add the song title artist and album name to the tracks but I cannot fiqure out how to create an empty album to put them into. Please help.

Hi, welcome to Apple Discussions.
There's no such thing as an empty album in iTunes. Simply select some tracks that you want to link together, *Get Info*., give them a distinct Album title and set the *Album Artist*. For a compilation you should also set *Part of a compilation* to Yes on the Options tab.
For more info. see http://www.samsoft.org.uk/iTunes/grouping.asp
tt2

Individual track start and end times: Fade in & out?

I can set start & end times for individual tracks.
Can I also fade in & out?

You can set start and stop times for individual tracks using Get Info>>Options tab.
iTunes Preferences>>Playback tab has a crossfade option that you could check out to see if it does what you want on fading in and out.

Function to bounce single tracks of a project automatically?

Hi guys
Is there any function i can use on logic 9, which bounces all the single tracks of a project automatically?
I have to bounce everything in Audio, cause I am about to send the stems to someone..
The project has 88 tracks so its quite a job to do it manually..
Ca anyone help me?
cheers!
Jon

Hi !
Thx for the answer!
It worked, but it bounces the tracks without the volume settings..
Means that the tracks doesn't fit each other what volume concerns..
I think I will have to do it manually
cheers

ITunes 7 has split my albums up into individual tracks in cover view!

In the two new views in itunes 7 many of my albums have been split up into individual tracks. Is there anything I can do to 'consolidate' them back?
Power Book Mac OS X (10.4.7)

Hi there, I have the same problem, Albums I've imported from CD and albums I've bought through itunes now display as separate tracks in both views with album art. Also in list view if I click on an album all its tracks are now not in the correct album order but mixed up, so if I use the album view im left with 10 album covers for the same album with 1 track per cover and in list view everything is all mixed up. I wish I'd never upgraded from itunes 6 as this is now a complete mess and almost unusable with 300 albums of music "WELL DONE APPLE" as a 12 year mac user Im starting to feel like im back using windows 3.1 again

Bouncing individual tracks

Similar Messages

Maybe you are looking for