Bounding and Free Transform Boxes do not scale properly for small objects.

Illustrator CS5 Windows:
When using the bouding box or the free transformation box to scale a small object, Illustrator will add some padding between the box and the object.
This would really be helpful, but the scaling box now scales the object based on the transformation handles.
This would be fine if the transformation corners fit the object, but because of the transformation padding, the resulting height, width, x, and y are way off.
To replicate (CS5 Windows):
1. Go to magnification of 100%
2. Create a box that is 100 pixels wide by 4 pixels high
3. With the object selected, take note of y: coordinate.
4. Select the free transformation tool
5. Drag the bottom middle transformation handle down a good distance.
watch the outlines you'll see the problem.
6. The top edge (y:coordinate) of the new object is now much lower, but the bottom middle handle should never change to the top edge position of an object (unless you invert it)
Is there a setting or something to turn this feature off?
Jeff

See here:
http://forums.adobe.com/message/3086491

Similar Messages

CS6 Free Transform ctrl drag not working properly

Anybody on this ...
When I use the free transform tool crtr-T and use the ctrl drag button, the corners do not extend properly. It extends universally as aposed to a distorted corner-pull. I uninstalled CS6 and reinstalled still getting the same result. Any help would be greatly appreciated...
Thanks

What conroy wrote convert a smart object layer to a smart object layer may seem a bit strange but he is correct. All smart object layers are not created equal they may contain many types of smart objects. An illustrator vector file placed in can most likely be reopened in illustrator by double clicking on the layers smart icon in the layers palette and transform the vector object in illustrator and when saved in illustrator the embedded smart object will be updated to reflect the changes made in illustrator. If you encapsulate a VSO into a Smart Object when you transform the resulting smart object layer it will be transformed like a raster layer using interpolation like all Smart Object layers are transformed. If you want to transform a layer that contain vector graphics using vector graphics you need to correct tools. Transform I would think would only transform Vector Shape Layer using vectors and change Text layer by changing font size all other layer types would be interpolated. An embedded smart object the contains many Photoshop layers some which are text and vector layers like a places PSD file may be transform better using Photoshop Image Size and then transforming the resulting updated smart object layer if your increasing the layers size.

Source monitor and program monitor boxes will not display video in full only half

I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797

+, - button and inherited tick box is in disabled mode for account assignme

In the attribute tab of org structure (PPOMA_BBP), we are not getting +, - button and inherited tick box is in disabled mode for account assignment category (attribute is KNT).
We want to enter two values for the account assignment category with inherited tick box (ticked).
Please suggest me how to get the +, - and inherited tick box (ticked) for the account assignment.
Regards.

Hi Imam,
Unde attributes
You will find one Application Toolbar...
Overview, Select Attribute, Check Entries,Insert line,Delete line..
So under All values you will find AcctAssigCat, Exculded, Default, Inheried
Select the row and click on Insert Line, now you should be able to insert the new acct Assignment category
rg
sam

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

Acrobat XI Pro/Standard doesn't support MS Access 2010: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Third-party version/ Acrobat Version (ship date)
Acrobat 6
(April 2003)
Acrobat 7 (January 2005)
Acrobat 8
(November 2006)
Acrobat 9 (July 2008)
Acrobat X (November 2010)
Acrobat XI (October 2012)
MS Access
Office 97
x
x
x
x
x
x
Office 2000 (Office 9)
N/A
√
√
x
x
x
Office XP (Office 2002/Office 10)
N/A
√
√
√
x
x
Office 2003 (Office 11) (11/17/03)
N/A
√
√
√
√
x
Office 2007 (Office 12) (11/30/06)
N/A
N/A
√ (8.1)
√
√
x
Office 2010 (Office 14) 32 bit
x
x
x
x
√
x
Office 2013 (Office 15) 32 bit
x
x
x
x
x
x

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

Outlook 2013 are not opening and showing pst files are not closed properly

Hi
Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
Need your support at the earliest to fix the issue.
Thanks

Hi,
What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
.pst file?
Kindly answer my questions so I can understand the situation better.
I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
simply disable the anti-malware software temporarily to see the result.
Regards,
Melon Chen
TechNet Community Support

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

Left and right arrow keys are not working properly now

I searched the forum and didn't see this posted. My left and right arrow keys are not working properly now.
For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
The issue persists after shut down, and even when logged on to other users, e.g. Guest.
All other keys seem to be working fine, including the up and down arrows.
I don't think it's a cleaning issue because fn + left + right produces the "[" character on the screen.
Any ideas?

I'm having the same type of issue on my MacBook except not with arrow keys. The volume keys do different things when I click on them. For example, the mute key brings up the dashboard and the volume up key makes all the open screens smaller (don't know what this feature is called). I did a software update then restarted the computer when this starting happening. Any help would be greatly appreciated, thanks.

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

ORA-10631: SHRINK clause should not be specified for this object

Hi
I was trying to shrink table to reset the high water mark but some unknown reason it failed.
Please help me
SQL> declare
stmt varchar2(100);
cursor cur is
select object_name from user_objects where substr(object_name,1,1)='A'
and object_type='TABLE';
begin
for i in cur loop
stmt :='alter table '||i.object_name ||' shrink space';
execute immediate stmt;
end loop;
END;
declare
ERROR at line 1:
ORA-10631: SHRINK clause should not be specified for this object
ORA-06512: at line 9
Regards
Jewel

http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#CJA
The shrink clause lets you manually shrink space in a table, index-organized table or its overflow segment, index, partition, subpartition, LOB segment, materialized view, or materialized view log. This clause is valid only for segments in tablespaces with automatic segment management. By default, Oracle Database compacts the segment, adjusts the high water mark, and releases the recuperated space immediately.
Compacting the segment requires row movement. Therefore, you must enable row movement for the object you want to shrink before specifying this clause. Further, if your application has any rowid-based triggers, you should disable them before issuing this clause.

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Bounding and Free Transform Boxes do not scale properly for small objects.

Similar Messages

Maybe you are looking for