Bounding box appears with pen tool.

Currently I am trying to make a mask around text so I can reveal text to make it look as if it is being written by hand. I place the text down with the text tool, I then used the pen tool to trace the text. For some reason though, I can only place a few anchor points before a bounding box appears around the anchor points. I can no longer add anchor points to my current path.
If I use the pen tool to select my created path, I still cannot add more anchor paths. If I restart after effects I can sometimes place a few anchor points on the path then the bounding box reappears and I cannot place anymore.

I usually set a solid to a vibrant color, change the blend mode to screen or multiply so I can see through it, and create and animate may masks on this solid. The solid is then used as a track matte. It lets me accurately see what I am doing.
If you close your path or miss a click when drawing a path you will occasionally get a bounding box. Pressing escape or deselecting the layer, then carefully selecting the path again should let you continue. It just takes a little practice to be able to add points to a mask.
BTW, if your mask is complex and has a lot of vertices then you should make sure that you have all of the points in place before you start animating mask position. You'll get better interpolation between keyframes that way. Here's an example:
I"m using both the marquis selection and transform option as well as animating single points here to do a simple roto job.

Similar Messages

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN

Problem with Pen Tool CS5

Hi,
I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating. In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path. Is this a setting I can fix?
thanks

I was having 32 bit while I upgraded from CS3 to CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installation will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to ins

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott

1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows

I open any page on Firefox and the page dimms and a box appears with number 2 and a button (ok) ,I have to press ok to continue Why does this box keep appearing on every page and site and hyow do i stop it ?

I have uninstalled and reinstalled a few different versions of firefox to check if this was the problem but no. As soon as firefox has started the box appears with the triangle with ! in it the number 2 and the button ,ok.
I have to press ok to get the page on every page i open. I need help!

This is caused by the InternetEngine - Powering Applications! extension. If you uninstall that extension it should stop this happening.
https://support.mozilla.com/kb/Uninstalling+add-ons

Why when I go to my account by entering my Apple ID a dialog box appears with inscription: "This Apple ID has not yet been used with Itunes Store.Pleas review your account information."

Why when I go to my account by entering my Apple ID a dialog box appears with inscription: "This Apple ID has not yet been used with Itunes Store.Please review your account information."?
Почему когда я захожу в свой акккаунт в Itunes Store ? всплывает окно с надписью "This Apple ID has not yet been used with Itunes Store. Please review your account information"?

I would be very grateful if you could help me as soon as all know ourselves))

Slow down when processing image clipping in photo shop with pen tool

Adobe cs5 slow down when processing image clipping use with pen tool. The path is applying after few seconds when we draw on the image. My system supporting 4 GB memory with 64 bit.

The main thing i use paths for in photoshop is extracting objects from photos.
Other uses include stroking paths with the paint tools. For example, if you had
a powerline to remove, one could trace the line with the pen tool and then stroke
the path with spot healing brush set to content aware fill.
more info on photoshop paths:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-73ada.h tml
MTSTUNER

When I downloaded the cc desktop app, the box appears with no info inside to select terms and conditions

when I downloaded the cc desktop app, the box appears with no info inside to select terms and conditions
any help would be much obliged

Realsports365 which operating system are you using? What computer? Have you verified the graphics driver is up to date?

Problem with pen tool, lines and blend tool

I draw line 1.
Then I break (click the arrow key and then click the pen tool again) and draw line 2
When I finish there is a puzzling gap on line 1 after where line 2 intersects:
Then when I use the blend too the resulting abstract looks like - non-continguous with broken lines:
instead of something of a continuous wave and unbroken lines like:
To me, the problem is clearly the gap show up but I don't understand why it is appearing, when as picture 2 shows, I clearly I'm drawing complete lines.

Thanks. That fixed it. I was able to select no fill in the pen tool bar (when pen tool is active), but could not select no fill when I clicked on the fill box in the regular tool bar (unless there is a trick) - all that comes up are color gradients to select.

Bounding boxes appear in Acrobat after exporting from InDesign

Whenever I create outline fonts in my CS3 version of InDesign (I haven't upgraded to CS4 on this one program yet), I'm left with some very strange thin white lines surrounding some or all of the resulting letters that look suspiciously like bounding boxes. This never seems to occur if I don't create outline fonts, but simply embed the fonts and create a PDF using the Export command, so I have to believe the anomaly has something to do with this conversion process within the program. If I use illustrator CS4 to create outline fonts and then place them within my InDesign documents, I don't appear to have the problem. However, that's not a very desirable solution as it negatively impacts the fluidity of layouts and the ease of design, both of which I use in design for.
And yes, these small thin white lines do print, so the problem is far more than merely academic.
Has anyone else ever experienced this issue, and if so, how did you solve the problem (assuming you did)?

Sorry about that, I apparently forgot to attach the file; have done so now.
The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
We cowboy up and seek solutions, eh?

How to Extrude a path created with Pen Tool

Hi All
I have created a path with the pen tool (the brown part), and now I want to extrude it, but it extrudes the whole containing block (See image below)
Now I have tried everything, from grouping to compound paths etc, but nothing works.
How do I extrude my path?
Thank you

...and Texturized it AFTER the extrusion....
Applied a Grain Texture after the extrusion.
For clarity:
Always pay attention to the Appearance palette. The order of the items in the Appearance stack reflects the order in which they are applied.
A so-called "live effect" (of which both 3D Effect and Grain Texturizer are examples) is an operation which is automatically re-applied after you make an edit to the object to which it is applied. The effects are applied in the order in which they appear in the Appearance stack, from top to bottom.
1. Ellipse Tool: Draw an ellipse. Leave it selected.
2. Apply 3D Effect.
3. Apply Texturize Effect.
Look at the Appearance palette. 3D Effect is listed above Texturizer, and the whole 3D rendering is texturized.
4. Appearance palette: Drag 3D Effect to below Texurizer. The unwanted extrusion of the entire texture image appears.
JET

Newbie problem with pen tool: shape not evident on any layer

I am trying to learn the pen tool. I made a line with the pen tool but now I can't find out which layer it is on, and I can't stroke it as I wanted. All of my layers are turned off and the shape still appears. However on searching through the layers there is no vector layer which contains my line. Also, I can't stroke the line as the stroke and fill options are greyed out on my paths panel. I have attached a screen dump to hopefully explain what I mean. I am using CS2 on Windows 7.

Okay thanks and as you can see from the screen dump, I have got the paths window up. So I can see the workpath. But I can't stroke it, the stroke option is greyed out. Also how can I get the path onto a shapes layer? Basically I want to stroke the path so I can show the shape of a roadway on a map. Maybe I am using the wrong method, maybe there is a better way to do this?

Problem with Pen Tool contrast...

I noticed this the other day. When I'm using the pen tool in Photoshop CS4, it sometimes takes the color of what I'm using the pen tool on, ie; if I'm working with a picture with a bright green or pink, the path is bright green or pink (see link below) The picture isn't the worst that it does, but if I took a screenshot when it's at it's worst, you wouldn't see anything. I went through all the preferences and saw nothing. I do have the OpenGL acceleration turned on. Thanks for any input!!!
http://www.flickr.com/photos/32892564@N06/3120591723/

Thanks. That fixed it. I was able to select no fill in the pen tool bar (when pen tool is active), but could not select no fill when I clicked on the fill box in the regular tool bar (unless there is a trick) - all that comes up are color gradients to select.

Bounding box appears with pen tool.

Similar Messages

Maybe you are looking for