Bowers and Wilkins P7 Compatibility with Mac Notebooks

I have a late 2008 13" Al unibody MacBook, and a mid 2011 11" Air MacBook. Are they fully compatible with Apple Store NZ listed Bowers and Wilkins P7 headphones? As these can be driven by some iPhones and all iPads, it would seem my MacBooks will have enough audio 'grunt' to adequately drive these headphones... Is this so?

Hello Aussie00
Having the same issue. Any luck resolving this? I've put a troubleshooting ticket into B&W. My MM-1's headphone jack works fine and my comp's internal speakers work. Odd. Here's what I wrote them:
My MM-1 speakers have stopped producing sound. The headphone jack for the MM-1 works fine. And my comp's internal speakers work. My Sys Pref says "The selected device has no output controls." What I've done to troubleshoot the problem.
1. Unplugged and replugged all connections (power, USB @ comp and speaker, and other speaker).
2. Powered down speakers and computer. Restarted.
3. Confirmed that audio is SysPref/Sound/Output/MM-1
4. Updated firmware (V6.0.00)
dc

Similar Messages

TS2634 My ipod touch will no longer play in both my docking stations, Bowers and Wilkins mini zeppellin and a Logitech, yet it plays in my car. Is the ipod about to die? Do I repair or buy another? It's only 2 years old! thanks!

My ipod touch will not play music in my Bowers and Wilkins mini zeppelin nor my Logitech. Yet, it plays in my car. The music can be heard playing in the ipod itself. It is only 2 years old. Should I repair or just buy another? Thanks!

Did it start not working after updating the iPOs on the iPod? SOmetimes updating an iOS breaks compatibility.
You can try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Logic Pro 9.0.2. compatability with Mac OS Lion

My old Mac crashed and I had to get a new one. Now my Logic Pro 9.0.2. version which was fully compatible with Snow Leopard, for some reason does not want to work with the new Mac OS Lion. Is there any way around getting an upgrade to get this program working again? Thanks!

Hi
You need to download and install an updater from http://support.apple.com/downloads/
Logic 9.1.5 and up is compatable with Lion.
CCT

Are ntfs files compatable with mac os lion

are ntfs files compatable with mac os lion

Files aren't ntfs or hfs or ufs or zfs.
Those are file systems that is the basis for how the OS stores the files on the computer. Files are store inside a file system, but the file system doesn't normally affect the file itself.
Mac OS X can natively read nt file systems. If you want to write, then you'll need something like Siddharth Khanna pointed out. I've also used Tuxera's product. You can use a combination of MacFuse and NTFS-3G for free, but if you need normal everyday access, that's going to fall short, I think.
On the other hand, Windows can't natively handle HFS+ at all. If you need to format an external drive to work with both, I'd suggest using exFAT. Mac OS X from 10.6.6 on can read and write it, and Windows back to some version of XP can read/write it. As the name implies, it is much like FAT, but on steroids. It can handle very large file sizes and disk sizes.

Is Adobe Elements 10 compatable with Mac OX version 10.9.2 ?

Is Adobe Elements 10 compatable with Mac OX version 10.9.2 ?
I have just bought a new Mac and would like to know if Elements 10 will work on it please.

flon
I am strictly an Elements Windows user but try to find common ground between Premiere Elements Windows and Mac to give a viable response to Premiere Elements Mac questions.
On this one, I suspect that the bottom line is going to be "try it" and see what happens in your specific computer environment.
Please review the discussion in the following thread
Re: Premiere Elements 10 crashes on disc templates
Also, you are in for major display problems with Premiere Elements 10 on a computer that uses a NVIDIA GeForce video card/graphics card.
There the fix is to roll back the driver version to May 2013 in order to get Premiere Elements 10 to function properly.
Please review, consider, and then let us know the outcome when your schedule permits.
Thank you.
ATR

Powercadd 6 is compatibility with mac osx 10.6?

powercadd 6 is compatibility with mac osx 10.6?

That's a pretty old version, significantly predating Mac OS X 10.6, so I doubt it will be compatible. I'd suggest you contact the developer of PowerCADD and ask them:
[email protected]
Regards.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

Photoshop Elements 6 compatibility with Mac OS X 10.7 Lion

Has anyone tested PSE 6's compatibility with Mac OS X Lion?
Thanks in advance.

It's Intel based so it should work.

Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks

Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks

Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions!
You will continue to hear different opinions here, where thoughts range everywhere between "anti-virus software is the evil spawn of Satan" to "anyone not running anti-virus software is a fool."
Truth is, this is still a very personal decision on a Mac. Depending on circumstances, it is still very easily possible to stay safe without using anti-virus software, but circumstances and personal preferences vary widely. Besides which, anti-virus software cannot even remotely provide you a guarantee of protection!
To learn how to stay safe (with or without anti-virus software), and how to decide whether to use anti-virus software, see my Mac Malware Guide.

Photoshop compatability with Mac OS 10.8

Which versions of photoshop are compatable with Mac OS 10.8, Mountain Lion?

tgm42 here in response to my own question. I don't have ready access to web to monitor this site for answers to my question. Please email me directly, in addition to posting; as I have limited access to my email.

Compatibility with Mac

I have a new Nokia 5300, before it i use a SOny Ericcson W600i fully compatible with Mac Os X and iSync never had problem and the compatibility is awesom easy to use. Now in This case with Nokia 5300 i can't find software to make it compatible in a automatic way, i have to do it by manual methood, would like to have some compatibility software.
Com'on help me nokia!! i'm concient of the great technology nokia have. I cange for the harware superiority not make me change for the software deficient.
Tanks from México.

dumbago wrote:
HI GUY
I need the plugin for my nokia E51..if I click on the link of E51 from the nokia isync page appears a page with an error: the page doesn't exist...may you help me?
Hi dumbago
Don't know which link you are trying to access, but no issues with Safari browser here:http://europe.nokia.com/support/product-support/isync/compatibility-and-download
Happy to have helped forum in a small way with a Support Ratio = 37.0

PS CS4 Compatibility With Mac OS X Spaces

I'm using Photoshop CS4 with Mac OS X version 10.5.5, and I can't seem to have different Photoshop documents (different windows) open in different "Spaces". I have no problem doing this with other applications. Is this a known issue with Photoshop, or is it the intended behavior?
Thanks for any help or insight you can provide,
-Steve

@Ramon:
this means:
if you would work with the actual mac os, you have to use a old creative suite.
if you would work with the actual creative suite, you have to use a old mac os.
i am using a actual mac too :-) (mac pro intel)
so i have to downgrade to a older system, because adobe isnt able to do, what all other programmers can do? i dont believe this!
because i would use the actual os x and the actual creative suite, my question is another one.
why can support all other NON-APPLE-applications spaces and why can CS4 not. this question is not answered in this thread.
CS4 is the most expensive application on my mac and shows the worst compatibility of all applications.
for me, CS4 is not a app, i use sometimes. i used it several hours every day.
its no argument for me to say: we would not support the actual version of the operating system we develop for.

Panasonic gh2 compatable with mac

anyone know mac compatibility issues with panasonic GH2 cameras? one problem i've encountered, after shooting yesterday for the 1st time, is that there is a horrible green cast and choked up shadows with files in iphoto.

1. What version of iPhoto?
2. You shooting Raw or Jpeg?
Regards
TD

Sharing windows printer with mac notebook

i've been trying to get my windows printer to print something from my MAC notebook. so far i'm as far as the print icon appearing on my MAC pc showing a print job in progress but also showing that the windows host (my ISP) is busy and that the mac will try again in 30 seconds. i run a links wireless system and i don't know what would make the windows unit give off a busy signal to my MAC

Welcome to Apple Discussions!
See my printer FAQ*:
http://www.macmaps.com/printersx.html
which may have some solutions for you.
Also note, printing labels for CDs is unwise. It has nothing to do with Mac or PC. Labels shorten the length of CDs. http://www.macintouch.com/cdrfailure.html covers that and much more. Basically for CDs, you should buy CDs that are prepackaged in a jewelcase, and not a spindle, and make your own jewelcase inserts or write on the jewelcase exterior the contents of the CD if you want to prolong the media life.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Earpods mic compatibility with Macs?

Hi,
I have problems with my earpods. I have an iMac early 2008 and my earpod mic dosen't work. I don't know if it's iMac sound input problem or an incompatibility issue microphone.
There are a list with macs compatibility?
Thanks.

read
http://www.theinstructional.com/guides/using-earphones-with-remote-and-mic-with- a-mac-ipad-and-ipod
http://support.apple.com/kb/ht3554
the google that gave those 2 hits
https://www.google.dk/search?q=which+macs+support+iphone+headset+mic&oq=which+ma cs+support+iphone+headset+mic&aqs=chrome..69i57.8774j0j7&sourceid=chrome&es_sm=9 3&ie=UTF-8

Bowers and Wilkins P7 Compatibility with Mac Notebooks

Similar Messages

Maybe you are looking for