Box in main window extend to next page in sapscript

Hi all,
I am trying to put box in main window in sapscript.
contents of main window extends to more than 1 page.
Box is appearing on first page but is not extending to other pages.
Pl help,
Regards
Senthil

Hi,
Please refer this thread.
Link: [sapscript box nto printed on all pages;
Hope this will help you.
Regards,
Renuka S.

Similar Messages

To display vline if main window flows to next page in SAPScript.

Hello,
We are facing issue that we have to put vertical line at the end of page , if main window flows to next page.
In our case, we have payment done for different currencies as well, so that means if for first currency USD we have 20 records then after 16 records page gets break then we want sy-vline to print there and next 4 records in next page, similarily for next currency EUR, then if we have 4 records it gets displayed on one page only, so no vline is required then.
So like this if we have 3 pages to be displayed then on first page it should displayed vline as records gets overflowed.
May be in Script we can have more than 3 pages as well, so at different currency when we have more records then only it should show vline, otherwise not.
Also we have signature window inside main window, so on next page it should not display line after signature.
So please help us for finding the solution to this issue as its really urgent.
Thanks.

Hi friend,
So as of now you know that the line count for a page is 16.
So after displaying records in main window just check the sy-index or keep a variable incremental for the loop.
Check whether the variable count is 16 and put a sy-vline. So if we have less number of records or if we have a signature window the vline wont be executed.
This will only be executed when there are 16 records for a page. So for better handling you can use the number of lines per page dynamically. Ie to know the size of lines in the page dynamically.
Else use of end of page command to draw lines at the end of page. But the end of page command should be used inside an if else command.
See the link below for more options in Scripts Link : [Editing Format Actions|http://help.sap.com/saphelp_nw70/helpdata/en/ce/6f0f82ea6311d18e2f0000e83dd9fc/content.htm]
I think this solves your issue. Please revert back to me if you face any issues. I will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 31, 2012 4:27 PM

How to print items in the MAIN window of the NEXT page (smartform)?

Dear forumers,
There are two pages (FIRST and NEXT) in my smartform with the same MAIN windows in each of the pages. Whatever that are changed in FIRST-MAIN window will also be seen in NEXT-MAIN window.
I will need to control the printing of table TABLE3 contents (already contained in the MAIN window) such that if a variable V_MAT_PRINT is 'X', the TABLE3 contents will only be printed in NEXT page and not printed in FIRST page at all.
How may I achieve this? Please help.
Thank you.

>
Mohammed Ahasanullah Mulla wrote:
> Hi Deborah,
>
> I had also faced a similar situation,in my case it was three pages..However i will try to tell you for 2 pages..After the second table .Add a program lines and force a page break only if V_MAT_PRINT is 'X'. After the program lines add a command and make the go to new page as second page.This will solve your problem.I have done the same and its working fine .If you have any questions do ask.
>
> Thanks,
> Ahsan
Hi Ahsan,
Here's my case.
If V_MAT_PRINT is 'X', print the following:-
FIRST page, MAIN window
- TABLE1
- TABLE2
- TABLE4
- TABLE5
NEXT page, MAIN window
- TABLE3
If V_MAT_PRINT is not 'X', print the following (no additional controls / changes are needed, everything remains unchanged):-
MAIN window
- TABLE1
- TABLE2
- TABLE3
- TABLE4
- TABLE5
In this case, is a page break suitable? I doubt it as TABLE4 and TABLE5 will still need to be printed back on the FIRST page regardless of the V_MAT_PRINT value.
Please advise further. Thanks.

How to skip secondary window if main window goes to next page

hi gurus,
i m having a table in main window which lists items and its rate n quantity.
the total price,discount and discount is calculated in secondary window.
now if the list of item get more than window size it goes to next page but with calculation in both page in secondary window . i want to skip the calculation on 1st page.the calculation should only apear in scond page.
thnx in advance.

Hi..
******Case 1******************
Suppose if you want display the Totals only in Last page :
In the Secondary window:
/: IF &NEXTPAGE(C)& = '0'
<<DISPLAY YOUR TOTALS HERE>>
/: ENDIF
***********case 2**************
Suppose if you want display the Totals only in Last page :
In the Secondary window:
/: IF &PAGE(C)& = '2'
<<DISPLAY YOUR TOTALS HERE>>
/: ENDIF
reward if Helpful.

Can I to execute two times the MAIN window in the same page?

Hello, friends:
How I can to execute 2 times the MAIN window in the same page in SAPscript, this without modify the program link a SAPscript?
I create in the same page two MAIN windows, but I can to print only one MAIN window, the second window is not appears.
Thanks for advance,
David

You can't - only one MAIN window is allowed per page.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

Smart forms- when i print a report it print main window data on same page

hi,
when i print a report it print main window data on same page .
i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
pl. help why it is happening
i create page in page i set next page and in second page give first page.
mukesh

mukesh,
what happened to this: smart form
close that please.
by the way,did you tried with what i suggested?
lets say mainwindow in 1st page.
copy the first page to second page.
now.
for 1st page: next page is : page2
for page2: next page is also : page2

Printing of MAIN window details on different pages

Hello,
I have creates a smart form with 2 pages (invoice & packing details) containing MAIN window in each page. Also created secondary windows for respective pages with changed data. There is one interface table. When I print this form all the details are getting printed correctly on both the pages except MAIN window details on 2nd page (i.e. packing details). On 1st page MAIN window is getting printed correctly but on 2nd page it doesn't. I try to put break point on MAIN window in 2nd page both it doesn't get triggered. Can some one help me to know the reason.
Rgds
Rajeev

Hi,
A small writing mistake in my earlier reply.
Hi,
I believe you have two pages ( FIRST page layout is for Invoice details ).
If the first page is spilled over to second page then you have problems with the packing details which is to be in the second page.
In that case design another page as NEXT page same as that of the FIRST page and for the FIRST page you mention the subsequent page as NEXT.
Then use a command in the NEXT page and mention Goto--> SECOND page for the layout of packing details with proper condition.
And display the packing details under the command.
regards,
Ram

2 main windows in 2 different pages with different layouts

Hi Guru's,
I'm working on Smartforms.
My problem is, i have 2 different pages with 2 diiferent main windows.
The First Page lasts after 7 pages of Data Printing.
It is coming corrctly.
I've assign the Next Page as Second Page in the First Page and i'm maintaining a condition in the First Page to go to the Second page.
Everything is working fine, but in the second page i'm not getting the Main Window.
What could be the Problem??? Why the control is not going to main window of second page???
Thanks in advance.
Regards,
Adi.

Try like this:
1. Set the Next page of the FIRST as FIRST
2. In the MAIN window of the FIRST, after completing the TABLE, create a command which calls the SECOND PAGE.
3. In SECOND page, create a MAIN window, with differnet name. If you create a same name, system will automatically refer the MAIN window in the FIRST page.
4. Set the next page of the SECOND as SECOND.
Regards,
Naimesh Patel

Printing dynamic box in main window in scripts

hi ,
I want to print the dynamic box in main window of my script.
Ex. Suppose the content of the main window is 5 lines so it should print box for 5 those lines only.

Hi,
Create a Main window with only 2 lines, Give a BOX command it will give u Border for entire Main window.
/:BOX FRAME 10 TW
For giving vertical lines Syntax is
/:BOX XPOS 16 CH YPOS 0 LN WIDTH '0' CM HEIGHT 2 LN FRAME 10 TW
It gives u a vertical line at 16 character. so for ur requirment add another command at another XPOS.
Try this below just below ur ITEM ELEMENT which has the display fields.
Main Window
/E ITEM_A
A,,,,&ITAB-ABC&,,&ITAB-XXX&,,&ITAB-CDE&,,&ITAB-GEF&
/:BOX FRAME 10 TW
/:BOX XPOS 16 CH YPOS 0 LN WIDTH '0' CM HEIGHT 2 LN FRAME 10 TW
/:BOX XPOS 26 CH YPOS 0 LN WIDTH '0' CM HEIGHT 2 LN FRAME 10 TW
/:BOX XPOS 36 CH YPOS 0 LN WIDTH '0' CM HEIGHT 2 LN FRAME 10 TW
/:BOX XPOS 46 CH YPOS 0 LN WIDTH '0' CM HEIGHT 2 LN FRAME 10 TW
Change XPOS according to ur requirement.
Now add another main window to the same page with changing UPPER margin, U can add upto 99 Main windows in one page.
So add upto ur Page is full.
For headings
Create a Variable window same as Main window, in place of fields, give descriptions.
Make sure that u give BOX command below the field declaration, if u give above, for last record it will not print box.
Regards
Bala Krishna

Main window data to be page protected in smartform

Hello Experts,
I want to make Main window data to be page protected.
But page Protection check box is in Noneditable mode .
Please let me know, how to make main window data to be page protected.
Regards
Mohit

Hi,
    Try this way
    Under the Main Table node, you will find, Header, Main Area and Footer.
    Select Main Area, right click Create> Folder
    Drag the Row item inside the Folder
    Select the Folder node, for Folder node out put options, you can select Page Protection check box.
Main Window
    Header
    Main Area
      Folder
        Row Items
    Footer
Regards
Bala Krishna

SMARTOFMRS - If Table get extended to next page!!!

Hi Experts,
Am working with SMARTFORMS.
I hv a situation in which, my_window shuld trigger, only if the table(entries) r extended to next page.
I can put a condition for triggering of my_window, like, SFSY-PAGE > 1, but, this idea wuld NOT work in my case/scenario.
So,
Is there any other idea, to let the system/SAP to get know that, the table(entries) r extended to next page(so, that I can keep a flag condition, by using that idea)?
I mean, other than SFSY-PAGE concept!
thanq.

Hi Srikhar,
You can try SFSY-PAGEBREAK.
If sfsy-pagebreak = 'X' that means there is a page break.Next page is available.
if sfsy-pagebreak = 'X' print the window.
Hope its helpful.
Regards,
Nikhil Moghe

Reg: Displaying all the items of main window in the same page itself.

All,
I am developing an SAp Script form which is using five windows. Out of which third window is the main window. In the main window i am displaying details of item sold. The form prints perfectly when the number of items is with in the limit of the main window height. When it exceeds the main window height a second page with the same format of the first page is displayed with the remaining items in main window. ie 1,2,4,5 window is repeated in both pages.
I want to display all the items of the main window in the first page itsel and if it exceeds first page show the remainng items in the next page and then display 4th and 5th window. IS it posiible using SAp script. Am i to do some configuration for this?
Note: I have assigned Next page to first page itself.

Thanks Anji.
I understood about display of first and second windows.
About main window and Fourth and Fifth window i still have doubt. I have given specific height to main window and after that put the fourth and fifth window with specific height in first page itself. So what happens is that When mainwindow overflows it will print up to specified height in the first page. Then prints the Fourth and Fifth window in first page. Then it goes to second window prints the remaining items in main window then again displays fourth and fifth window. Could you please find a solution for this too.
Regs
Rakesh

Box in main window of script is not printing

Helllo Friends
Box in main window of script is not printing but the same is available in print preview. I have use the following commands.
Please help me.
/:           BOX WIDTH '23.40' CM FRAME 20 TW
/:           BOX XPOS '0.00' CM YPOS '1.40' CM WIDTH '23.40' CM FRAME 25 TW
/:           BOX XPOS '0.00' CM YPOS '8.10' CM WIDTH '23.40' CM FRAME 25 TW
/:           BOX XPOS '0.00' CM YPOS '9.00' CM WIDTH '23.40' CM FRAME 25 TW
/:           SIZE WIDTH '0.00' CM HEIGHT '8.10' CM
/:           BOX XPOS '0.00' CM FRAME 25 TW
/:           BOX XPOS '0.50' CM FRAME 10 TW
Thanks In Advance
Regards
SUNITHA

Try changing X postion to not equal to zero something else for example.
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.1' CH YORIGIN '+0.4' LN
/:           SIZE WIDTH +0.7 CH HEIGHT +5.0 LN
/:           BOX FRAME 7 TW
/:           BOX HEIGHT '1.1' LN INTENSITY 15
Nabheet

How to output particular text in main window only in first page

Hi experts how to ouput particular text in main window only in first page after that actual transaction data will be continued.....any ideas....Answers will be rewarded.....

Hi,
Try this.
/: IF &PAGE& = '1'
/: ENDIF
Thanks,
Naren

Box in main window extend to next page in sapscript

Similar Messages

Maybe you are looking for