Box just reset itself, now wont bring up guide, dvr, or info about shows

my hd dvr box just randomly reset itself for no reason, and now it only displays the channel, wont let me bring up a guide, dvr or information about the program, athe channel up and down work, however it wont bring up information about the channels at al, any help on this would be appreciated, i reset the box and router and nothing happened..... ive had nothing but problems with these CROOKS at verizon, cannot wait to leave them
Solved!
Go to Solution.

Your box is probably taking new code. Leave it be for 15-20 min. Each time you reset it, you re-start the code download - just making it take that much longer.

Similar Messages

HT5577 phone just reset itself and wont let me activate?

Any Suggestions...it all of a sudden reset itself and now asks me to activate...each time i try over wifi it says it is offline and to try thru itunes...try through itunes and it wont let me activate...says all is good...very confused and stressed!

Vanerian
Re: phone decided activation required, won't activate
Oct 5, 2013 8:46 PM (in response to jperkins007)
If you are not a developer:
You have to restore your phone.
Open iTunes
Plug in your phone
Hold down the home button and power button at the same time
When the screen goes black let go of the power button but not the home button
Restore the iPhone
Wait for about an eternity
Tell god you are sorry you stole from apple in the summer and you will never do it again.

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

Just updated itunes now wont connect to ipad or iphone

just updated itunes now wont connect to ipad or iphone

Do you have a mac or PC? If a PC try going into the control panel, add/remove programs, find something named Apple device driver, apple mobile device support, something like that (the exact name has changed from version to version)
Uninstall that then restart your comptuer
Open iTunes and then plug in your device and see if the drivers install

Cellular data usage statistics just reset itself - iOS 5.0.1, iPhone 4S

My cellular data usage counter just reset itself.
It is not the first time I noticed it, it is 2nd or 3rd time since my upgrade to 4S with iOS 5.x.x.
It never happened to me previously (iPhone 3GS, iOS 4.x.x).
Any idea why?
My 4S is factory unlocked, bought in Europe if it matters.
It is on the latest iOS 5.0.1 but it happened at least once with 5.0, too.
Any help will be appreciated.
Regards,
Gitarzysta

Well I can't really say it is a problem yet, as I have only seen it happen once. There has to be logs somewhere that I can find. Might have to do some web searches. I was just wondering if anyone else has had this or seen it.
I do thank you though.

IPod Randomly Reset Itself, Now Apps Are Not Working!(4th gen)

So, I was just browsing websites in Safari when this happened. I'm pretty sure I got linked to Tumblr and then my iPod decided to reset itself. After that, many apps refused to work, including Safari. Puffin Web Browser still worked, but it said that I was located in the United Arab Emirates, when I'm in the United States. Many YouTube videos refuse to work now also. I honestly have no idea what happened, and any help would be much appreciated.
Thanks!
Noah

Software glitches happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My phone has been activated for over a week, and now it just reset itself and won't activate. What do I do?

I had this iPhone activated at my AT&T store last week. I have had no problems with it, until tonight. I was using it and then the loading screen with the apple came up and it said activation required. When I try to activate it on the phone it says the servers aren't available, and to use itunes. When I go to iTunes and plug it in, it says the software on my phone has expired and I need to upgrade. It was running iOs 7. When I go in to iTunes, no updated iOs is available and I can not activate it, it shows up with all my apps and music. What do I do?

So I had to manually update form a download on the iOS dev portal.
https://developer.apple.com/devcenter/ios/index.action
I used A1429 but apples info link didn't help for me deciding, luckily the wrong download just wouldn't install.

HT1918 I am trying to change the country of id on my apple store payment details. The button does not bring up options, just resets itself. I need to change the country as I have moved and payment is no longer valid, I can't download any new apps. Help

I am trying to change the country/ region on my store account. When I press the 'change country/region' section in 'my account' it does nothing.... I have moved country, so I cannot enter valid details of payment and so the store is refusing all app requests.
Has anyone a way around this please?

Before you can change countries in iTunes, you will need to have a valid payment information addressed in Ireland. When you have one, you can go ahead and change the country on your account.
- sign in to iTunes
- go to Account Information page
- enter your Apple Id and password
- click on Change country or Region
- enter your new information then save
If you will have a hard time, I suggest contacting email support.
https://expresslane.apple.com/GetproductgroupList.action

Just reset Ipod, now I have to register again?

I just had to reset my Ipod, now it tells me I need to register the Ipod which I've already done when I bought it. Do I really have to???

Resetting the iPod does not usually result in the need to re-register, so it may be that you (still) have some sort of problem on the PC itself (which resetting the iPod was no cure). If you fix that problem you may not need to re-register.

My droid just reset itself...

Two nights ago, my droid log in screen started displaying numbers and deleting numbers by itself around midnight (yes....the phone has gremlins). Obviously, I thought this was a bit odd then suddenly it shut off. The next morning when I hit the button to view the login screen, it welcomed me and said my phone had been successfully activated and then proceeded through all the setup screens. All of my photos...texts....apps...etc. are all gone. Any clue what happened???!! And no, the phone didn't get wet, dropped, or damaged in any way prior to this very odd occurrence.

I like the cute little Gremlins, just not Gizmo and it sounds like that may have been what took over your phone, gabigal2.
It's hard to say what may have happened to cause your phone to act like this. It appears as though it did a hard reset on it on it's own, but again I don't have a hard core reason as to why.
How has the device been acting since this odd incident?
Tamara H.
Follow us on Twitter @VZWSupport

Computer just resets itself for no reason

I just customer built a computer. Im using the MSI (ms-7030) k8n neo platinum and sometimes my computer just reboots for no reason. I reinstalled xp pro because i was thinking it was that cool adn quiet software but it still does it. (it doesnt do it as often) when i reboots to xp it say a device driver cause ti and microsoft doesnt know the cause. I do have some cheap memory. im using the corsair 3200 value memory one stick of 512 Could it just be that. THe other problem is i cant over clock for crap thats why i bought the board because of the dynamic overclocking feature. ive been reading a lot of FAQs on the subject. Still same results liek increasing the vcore a bit etc. but ill post that later on a different topic. Basically why is my computer unstable. I got 5 fans blowing from front to back. Can anyone help.

Well hope its not bad mother board! My power supply is an antec 350w the funny thing is the first power suppy was some generic 350w i purchased to save money but it didnt work it would let me boot the comp up once. and that was it. IF i unplugged it and plugged it in it would work. After that my mouse and keyboard would be lit up really bright like a power surge was going through them(keep in mind the computer would be off) then i couldnt get the computer to boot up or even a bios screen and the power suppy would make a wierd buzzing sound even though it was off. then next day i took it back to frys electronics here in san diego. and got me an antec 350 watt and all those problems went away. Could the first power supply i bought fry something causeing my comptuer to reboot from time to time. i also noticed that i hooked my HDD to one of my 5 cooling fans power supply chain making me think the fans could be draining power from my hdd. the fans chain together one off the other the last device on the power chain was the hdd. I moved the HDD off of that and on to its own free white plug strait of the power suppy. THe computer hasnt self reset so i cant see a blue screen of death as of yet im still waiting. It restarts like 1 out of every 10 uses. I noticed its when im doing something like buring a dvd or using many windows programs at once. never just idle. It never restarts during games either like doom 3 unless the core cell crap was running. (not installed in this copy of windows) I dont know where to look in windows to see the cpu temp. The cpu is properly inserted im very confident of that. But i must confess. the first time i put it together i didnt lift the lever for the cpu and i forced the fan clamp and heatsink on top. it took awhile to realize thats why my computer would work but none of the pins was bent! Does this help any diagnose the computer. Also i keep hearing about corsair ram. Thats what i got. Anyone else got similar problems? Thanks alot for your help guys.

I recently bought a 13" Mac Book Pro i7 dual core processor and everything was just fine until now. I have been using iMovie for about a month and it runs perfectly, but now I can't seem to use it for more than 20 minutes without iMovie crashing. Help?

When iMovie crashes it also makes my compute very slow and unpleasant to use. Has anyone else had this problem before? Should I take my laptop to the genius bar? I owned this computer for over a month now.

check out this link which answers your question http://support.apple.com/kb/HT1242
after re reading your post, I think you need an SMC reset instead: http://support.apple.com/kb/ht3964
what does activity monitor show? screenshots?

Under what conditions does a STB reset itself?

Just curious.
My 6416 seems to do it when I am in VOB or when I'm trying to get it to process too many things at once.
Any of you techies know?

the primary reason the box will reset itself, is that it's getting too hot. there is a temp gauge, and if it reaches a threshold it will reset itself to try to cool itself off.     Other than that, it would be a glitch in the firmware or software, because there aren't any real known reasons that it should reset based on a FF or a Cache being full.   There is a neat write up here that gives you boot error codes, so these will give you an idea of what "technically" would cause different things
http://en.wikibooks.org/wiki/How_to_use_a_Motorola_DVR/Boot_Error_Codes
for actual resets though the primary thing is heat.   you can check the temp by going to the diagnostic menu.
that is accessed by using the front panel, and not the remote.
with the box powered on, you hit (with 1 sec intervals) power once, select once, and select a 2nd time
that will pull up a diagnostic menu, and then you choose
d13 PVR/HDD STATUS
and then it's on page 2 so you have to scroll down to see it

Resetting itself?

ever since ive had my tbolt ive had nothing short of problems ive called and emailed about them
all now im getting problems were my tbolt will just reset itself no matter what i would be doing
i could just unlock it or be in settings or just swipe over my pages or even if its just laying down
somewhere it just resets itself im being told by a rep at this moment that its part of the functionality
of the phone to do that my jaw dropped to hear that i just said thank you thats all i wanted to know
so if i go to replace my tbolt im just going to be getting the same effect well im into 30 days having
my tbolt just wishing i should of gotten another phone instead now im stuck with a brick that its
functionality so called self resetting here on my desk of a phone...i mean the 1st week with it
was great worked flawlessly. I know everything there is to know about android ive owned several
devices since i been with verizon. ive unchecked the news and stocks from syncing ive turned
down the brightness so low its hard to read when your outside. dont get me wrong each device
is different with there users... im at my wits end with this

droidsw wrote:
Why not start over? Wipe the phone. Do a hard reset and do not re-install any apps. If that doesn't resolve the issues, stay on the phone with Verizon until you find someone that can help you.
As for Watchdog, I found it annoying.
If I have the app market open, it alerts that the market is using a lot of resources. If I am Swyping, it alerts that Swype is using a lot of resources and on and on.
And to top it off, my phone had not rebooted on it's own since the Dec-Jan timeframe. I had installed Watchdog and nothing else recently and experienced a reboot. I un-installed Watchdog and haven't had another one.
I have never had watchdog do that to me when I was tracking apps. I never had it installed longer than a few hours as it would catch apps running that shouldn't be running processes. When I open the market it has never told me it was using a lot of resources though... That's a new one for me... Did you have it setup realtime tracking and have it set to "agressive"? When I setup mine I have it realtime and have the middle selection.

Help why can i not use my ipad since it reset itself

hi my ipad 2 just reset itself when i restated it and put id etc in all i get is cannot connect to sever why is this ????

I'm not sure what you mean by the statement that the iPad reset itself when you restarted it. Do you mean you had to restore it and start all over again with device activation? You said that you put in ID etc, and that really doesn't tell us that much. Now all you get is can't connect to server. I assume that you mean in Safari. If that's what you mean, clear Safari, close all of the apps on your iPad, and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Box just reset itself, now wont bring up guide, dvr, or info about shows

Similar Messages

Maybe you are looking for