Box model experts, why wouldnt this layout allow for a container div to fully expand?
Box model experts, why wouldnt this layout allow for a container div to fully expand?
Please see attached jpg.
Live site is at http://www.theminnternet.com/
You have an answer for the height issue, you may also be interested in this article that talks about cutting down on the stylesheet size... you have a lot of styles in your stylesheet that can really be trimmed down by using shorthand rules.
http://www.communitymx.com/content/article.cfm?cid=A43B828960590F55
Similar Messages
-
I am currently using mac os x 10.5.8 Does this version allow for an upgrade to Mountain Lion?
Snow Leopard Purchase
If you are unsure exactly what year your Mac is, check the model number.
Model Numbers
You also might want to check application compatability since PowerPC applications aren't supported.
Application Compatibility
If you can't upgrade to Mountain Lion, here are the requirements for Lion.
Computer Compatibility - Lion
If you have applications that you want to use that aren't compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on. -
I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?
I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly): -
Some of the birthdays I have entered in Address book appear in my Ical one day and one year earlier than the date I have given. Eg. I have entered a birthday in Address book as 23 March 2011 and it appears in Ical as being on 22 March 2010. Other names have no problems. There are only some that do not appear with the correct date and year. Why is this? Has anyone found how to correct this strange problem? I have Time Zones ticked.
Bronze2011I'm having this exact same problem, but it's doing it with a bunch of birthdays. I also did 0001 when I didn't know the birth year, so I went back and did a more current year, but they still aren't showing up where they should be...or at all. It's completely bizarre.
-
Had problems with Flash not working. Windows 7, IE 9(?)latest. Uninstalled Flash, reinstalled Flash. Problems look like Flash never reinstalled ok. Can't see the "Clowds" shows version 15 installed. Had Flash Professional installed, reinstalled tha too, no luck. I get "webpage wants to use Flash msg constantly at bottom of IE9. "Allow/Allow for all sites" Add on for Flash is in IE9, and Enabled. Please help!! reinstall IE? Thanks!
Here is the install log that is in the system32\Macromed
folder. This shows where the error is occuring and that the file
that will not install is Flash10b.ocx
File: wrote 3866528 to
"C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx"
IfFileExists: file
"C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx" exists, jumping
352
File: overwriteflag=4, allowskipfilesflag=2,
name="FlashUtil10b.exe"
File: wrote 240544 to
"C:\WINDOWS\system32\Macromed\Flash\FlashUtil10b.exe"
End Main Section
Section: ""
Start Post Section
Register Player
Error registering DLL: Could not load
C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx
Call: 997
CallFixDACLs
CreateDirectory: "C:\DOCUME~1\tr3Ks\LOCALS~1\Temp" (1)
File: overwriteflag=4, allowskipfilesflag=2,
name="FlashUtil10b.exe"
File: wrote 240544 to
"C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe"
Call: 1227
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\nsy10.tmp\nsExec.dll"
File: wrote 6144 to
"C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\nsy10.tmp\nsExec.dll"
Delete: "C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe"
Delete:
DeleteFile("C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe")
CreateDirectory: "C:\WINDOWS\system32\Macromed\Flash" (1)
End CallFixDACLs
Jump: 356
Register Player
Error registering DLL: Could not load
C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx
MessageBox: 12582960,"Failed to install.
For troubleshooting tips, please see
http://www.adobe.com/go/tn_19166" -
Why will this not work for combo box
I need to know why this will not work a combobox but it works for text fields. Isay ther is an error in the doc.createTextNode.
Please any help would be great.
Thanks
// Repeats for each Element in the User Configuration.
item = doc.createElement("COMPANY_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupCompanyNameJText.getText()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("INTIALS"); // Create element
item.appendChild( doc.createTextNode(SetupIntialsjComboBox.getSelectedItem()) );
UserConfig.appendChild( item ); // atach element to User Config element
item = doc.createElement("FIRST_NAME"); // Create element
item.appendChild( doc.createTextNode(SetupFirstNamejText.getText()) );
UserConfig.appendChild( item );when I do that I end up with the following
Error: #:300: class Configuration not found in class
any ideas
thanks -
HI,
i created a jsp dynpage using the wizard in NWDS and in the jsp file that is created using the wizard, i have written something like this.
<html>
<head>
header
</head>
<body>
body
<% String str = "jsp dynpage" %>
</body>
</html>
as you can see it is a plain jsp file without any hbj tags.
when viewed in browser, it throws a compilation error in j2ee engine.
but when i remove the line "<% String str = "jsp dynpage" %>".. it works fine.. why arent the jsp tags working here.. any idea?
thanksThis is ususally how I call a method from with in a jsppage. Notice that there is an '=' sign at the beginning. Maybe this is important in your case.
<%<b>=</b>salesNumbers.getCurDatInOrd()%>
You java code sort of doesn't make sence to me. You are just filling a string.
Regards,
Rich Heilman -
This is only in Firefox. It doesn't happen in Internet Explorer or Google Chrome. Here is a screenshot.
http://i.imgur.com/iok2f3e.jpg?1Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you. -
Problem: Why does this only work for powers of 2?
I wrote this program to create a golf league schedule for, ideally, eight players. However I want it to be flexible enough to permit for other denominations, such as 10 or 12. When I run the program it works perfectly for any number that is a power of 2 (2,4,8,16,32,etc...) but it will not work for other even numbers such as 6,10, or 12. If anyone has any insights it would be most helpful.
*(This is my first post on this forum so if anything looks not quite right or if this post isn't worded exactly how it should be then I apologize in advance)*
Here's the three classes.
public class ScheduleDriver
public static void main(String[] args)
//instance variables
int max; //size of flight matches array
ScheduleMaster master;//instance of class
//get max number of players for flight
System.out.print("Max number of players in this flight:");
max = Keyboard.readInt();
master = new ScheduleMaster(max);
//create weekly schedules for season
master.createSchedule();
//display weekly schedules
master.displayWeekly();
}//end main
}//end ScheduleDriver
public class ScheduleMaster
//instance variables
int maxPlyrs;//maximum number of players in flight
Week[] weeklySchedule;//array of weekly matches
public ScheduleMaster(int plyrs)
//set up instance data and declare array size
maxPlyrs = plyrs;
weeklySchedule = new Week[plyrs];
//set up the size of each week's matches array
for (int pos = 0; pos < plyrs; pos++)
weeklySchedule[pos] = new Week(plyrs);
}//end for
}//end constructor
public void createSchedule()
int count = 0;//index of weeklySchedule array
final int QUIT = -1; //quit value for loop
int flag = 0; //value to continue or exit loop
//for each player A
for (int a = 1; a < maxPlyrs; a++)
//for each opponent of player A
for (int b = (a + 1); b <=maxPlyrs;b++)
//set count/index and reset flag to zero
count = (a - 1);
flag = 0;
//while still haven't found correct week for this match
while (flag != QUIT)
//if at least one of these players are already scheduled
//for a match this week
if (weeklySchedule[count].checkPlayers(a,b) == true)
//if last valid index of array has been reached
if (count == (maxPlyrs - 2))
//reset count/index to zero
count = 0;
else
//incriment count
count++;
}//end if
else
//assign this match to array of matches for week
//and then exit loop
weeklySchedule[count].setMatch(a,b);
flag = -1;
}//end else
}//end while
}//end for
}//end for
//fill in last week/position night
for (int pos = 0; pos < maxPlyrs;pos++)
//set up position match
weeklySchedule[maxPlyrs - 1].setMatch(pos + 1, pos + 2);
//incriment pos
pos++;
}//end for
}//end createSchedule
public void displayWeekly()
//for each week in schedule
for (int pos = 0; pos < maxPlyrs;pos++)
//display header
System.out.print("WEEK " + (pos + 1));
//if pos/index is 0 or even, flight plays front 9
if ((pos % 2) == 0)
System.out.println(" [FRONT 9]");
//else flight plays back 9
else
System.out.println(" [BACK 9]");
//display lines
System.out.println("----------------");
//display week's matches
weeklySchedule[pos].display();
//skip a line
System.out.println("\n");
}//end for
}//end displayWeekly
}//end ScheduleMaster
public class Week
int[] schedule; //array of players involved in matches for week
int max; //max number of players
int count = 0; //number of players currently involved in matches
public Week(int size)
//set up instance data and size of array
max = size;
schedule = new int[size];
}//end constructor
public boolean checkPlayers(int playerA, int playerB)
boolean flag = false; //flag to determine if at least one of
//the players to check are already playing
//this week
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player A matches player already playing this week
if (schedule[pos] == playerA)
flag = true;
}//end for
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player B matches player already playing this week
if (schedule[pos] == playerB)
flag = true;
}//end for
return flag;
}//end checkPlayers
public void setMatch(int playerA, int playerB)
//if array can take more matches
if (count <= (max - 2))
//insert players into array of active players for week
schedule[count] = playerA;
schedule[count + 1] = playerB;
//incriment count of players playing this week by 2
count = count + 2;
}//end if
else
System.out.print("No more matches can be entered!!!");
}//end setMatch
public void display()
//for every even numbered index starting at zero
for (int num = 0;num < max;num++)
//display the player at that position and the next consecutive
//player who will be his opponent for the week
System.out.println(schedule[num] + "VS" + schedule[num + 1] +
//incriment num
num++;
}//end for
}//end display
}//end WeekAh, I have discovered the problem. The reason for the infinite loop was because of the resetting of the counter/index after every successful match entry back to (a - 1). This was causing matches to be put into weeks where they didn't belong, which caused the program to infinitely loop because it couldn't find an appropriate week to place it's next match. The only time the count should be reset back to zero is when a new player A is being processed or the last valid array index has been referenced before an out of bounds exception would be thrown. I'm still not entirely sure why this doesn't occur on powers of 2 but theh again I haven't put too much thought into it having solved the initial problem! :)
Anyways thanks for the input all who posted, much appreciated.
Happy programming!!!! -
Why is this so hard for BT?
Here is a copy of an email I have sent to the top bloke in BT about theeir terrible home moving procedures:
Dear Sir,
I’m moving home at short notice on 29th April due to work commitments. This move was only confirmed at 10.00am this morning, 22nd April.
I called BT to arrange for me to have the Infinity line that is already connected to the new property switched back on on the April.
Apparently it is not fibre to the cabinet as usual, but fibre direct into the house.
After being passed through 4 different members of staff I was eventually connected to a lady who promised to call me back. After a couple of hours and no callback I managed to recount her by calling BT again.
She then informed me that the earliest reconnection date was May 22nd, over 4 weeks from today. Apparently an engineer has to visit the house to reconnect. Why? She couldn’t tell me.
Bt take an instant to cease the service, why is it impossible to reinstate within more than 4 weeks?
I presume when the previous owner vacated the house he didn’t take the fibre connection with him. I’m perfectly capable of plugging in a router to a socket which is all the engineer will do. As I understand it the re enabling is done at the exchange.
I would be grateful if you, or one of your exec team could look into this issue which I understand is widespread and expedite a recommissioning in a timely manner.
As a matter of interest, the girl I was speaking top whilst placing the order told me the way to get around this issue was to find a wifi hotspot in the garden! I didn’t realise hotspots were in everyones garden – I can’t connect to my own router in the garden, why on earth she thought I would have random connections in a large gardened detached property is incredible…
I realise everyone wants their internet connection yesterday and all have valid reasons for doing so, but my wife uses the connection for video conferencing with her job, so I guess that’s at least as valid a reason as anyones. Over 4 weeks is pretty much an insult I feel.
I look forward to your solution in the near future.
Kind regards,
andygoWelcome to this forum.
This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, account numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
Its quite possible that the connection has been recovered, and re-used for another customer. The date you have been given would have been the next available date that a suitably skilled Openreach Field Technician would be available to re-provide the connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
hi guys,
I don't understand why the java class files can be decompiled into original source code. What is the benefit of that? This is against intellectual property. Nobody wants their source code to be view by other people, especially if your project is critial and vital to your business!!!!!!!
I tried the "DJ- Java Decompiler", the source code it produce is almost identical to the original. Sun has always claim java to be a secure language, but the java class file itself is not secure at all in the first place!!!Decompilers also help people better understand code in an advanced way to use it better. I know I use the sun Java files for common java.lang and java.util classes to make sure I'm doing it the best way possible.
If you have the software are want to violate Intellectual Property, you could just copy the executable and sell that. Decompiling and recompiling a program to steal it seems like a long road to no-where.
Decompilers are about understanding the code.
IP is what you do with a document when you have it. If your respectful and use it as it was intended to be used, then the more you know about it, the more legal benefit you will gain from it. Violating IP is about wrongfully transferring information, not about understanding things you legally have in your possession.
However, what courts may consider fair use is always declining. Soon you'll only be able to listen to the first half of the songs on a CD and after that they'll probably declare that you're stealing if you pay some special 'second-half' royalty fee.
If you understand how to do things, then you can just write it yourself, and better, without resorting to stealing. -
My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why is "onLoad" not allowed for the div tag in the behaviors effects?!
I have a js menu positioned relatively over a Flash intro in hybrid fashion; I'd like for it to appear gradually on Load so that it appears at the end of the intro, but you can't use onLoad for the div tag apparently. Is there any other way to do this? I do NOT want to have to create a navigation menu in Flash...
As David says onLoad does exactly what it says, triggers the event on page load.
A simpler solution would be to attach a JavaScript behavior to the onLoad event or separately it would not matter, to gradually fade-in your menu.
There are many utilities to do this and all are dhtml, Try searching for one and adding it to your webpage.
See the spry fade-in/out for an example of a simple effect, (you would have to adapt it to your requirements as with most special effect behaviors).
Link to spry:
http://labs.adobe.com/technologies/spry/home.html
PZ -
Need help in this code snippet for split container
Hi,
I am using the following code to display two tables in report output.
using cl_salv_table.
=============================================================================================
START-OF-SELECTION.
DATA: lo_report TYPE REF TO lcl_test_class.
* create report object
CREATE OBJECT lo_report.
* call methods
lo_report->get_data( ).
lo_report->process_data( ).
lo_report->generate_output( ).
METHOD generate_output.
data: g_custom_container TYPE REF TO cl_gui_custom_container, "custom container
g_splitter_container TYPE REF TO cl_gui_splitter_container, "splitter container
g_top_container TYPE REF TO cl_gui_container, "top container
g_bottom_container TYPE REF TO cl_gui_container, "bottom one
g_display TYPE REF TO cl_salv_display_settings, " set display pattern
g_slav_table TYPE REF TO cl_salv_table,
g_table TYPE REF TO cl_salv_table.
"create custom container placed in CUSTOM AREA defined on screen
CREATE OBJECT g_custom_container
EXPORTING
container_name = 'CUSTOM_AREA'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
"now split the container into two independent containers
CREATE OBJECT g_splitter_container
EXPORTING
parent = g_custom_container
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
"get top container
CALL METHOD g_splitter_container->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = g_top_container.
TRY.
CALL METHOD cl_salv_table=>factory
EXPORTING
r_container = g_top_container
IMPORTING
r_salv_table = lr_table
CHANGING
t_table = gt_itab_header. "gt_itab_header is populated with required output columns in process_data( ) method
CATCH cx_salv_msg.
ENDTRY.
g_display = g_table->get_display_settings( ).
g_display->set_striped_pattern( cl_salv_display_settings=>true ).
g_display->set_striped_pattern( cl_salv_display_settings=>true ).
*... Display table
g_table->display( ).
ENDMETHOD.
=============================================================================================
<Added code tags>
when I Execute the code, it still stay on selection screen does not display output table. If I comment out the lines
EXPORTING
r_container = g_top_container
from the Method "cl_salv_table=>factory" the output is displayed with table in required format.
Could someone help me out identifying what am I doing wrong.
Thanks,
Abhiram.
Edited by: Suhas Saha on Jan 31, 2012 9:14 PMwhen I Execute the code, it still stay on selection screen does not display output table.
You need to call the screen in which you have defined the custom container 'CUSTOM_AREA'. And you need to call the method generate_output( ) in the PBO of the screen.
If I comment out the lines
EXPORTING
r_container = g_top_container
from the Method "cl_salv_table=>factory" the output is displayed with table in required format.
If you're removing the R_CONTAINER parameter, SALV framework displays the data in full-screen grid. Actually it uses REUSE_ALV_GRID_DISPLAY to display the data. Hence you are getting the data.
To be honest i'll be surprised if you are getting the splitter container, can you confirm if you are getting it?
BR,
Suhas -
My iphone settings show that I am connected to a Wi-Fi network, yet when I go to download an application I can not do so because a pop-up message says I must be connected to a Wi-Fi network. Why is this? Thanks for the help!
It means you must be connected to your computer via Wi-Fi (or cable).
Or wait for iOS 5
Maybe you are looking for
-
Please make this a good experiance for my first post on any board. READ ME
Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago) So after a whi
-
How do I install os x on a mac with no operating system
A friend gave me an IMAC but the hard drive was wiped out. Is there a way to download an operating system?
-
Win 32 appilication error while running Itunes 7 setup
Does any one have a solution to the error "Itunessetup.exe is not a valid Win32 Application" while running the new Itunes setup.
-
Inserting/manipulating PDF in Flex 3 AIR project?
I've read as much as I can find about dropping a PDF into my Flex 3 AIR project, but the information is scarce and I understand it's a very new (not fully baked) feature. Can anyone describe what component to use to drop a PDF into my AIR project? I
-
I have a 500 GB hard drive and it's been running less than 1/2 full forever. And then all of a sudden there is only 22 GB free. And now it has 50.7 GB free. I have not installed or deleted anything that would explain these changes. I've ran all the t