Box updated

Just had box update menus are much better for my old mum and dad to read now.nice one bt

guilbo wrote:
Ta.
Nice to know someone out there is paying attention.
Yeah,
Thats what I like about these forums. They DO listen AND act on it. And the Mods can be really funny, helpful and approachable too.
Rank - Mostly Harmless.

Similar Messages

Combo box update

How do you get the value of a combo box as the operator scrolls thru the list with the arrow keys? Combo box updates once the operator presses enter but I would like the value in real-time.
Thanks,
Paul
I have attached a very small example I am working with. I need it to work with the event structure in order for it to be implemented into my current software.
Attachments:
Combo Box Update.vi ‏36 KB

Hi Novatronics,
You could try replacing it with a Dialog Ring?
See attached.
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd
Attachments:
Dialog Ring Update.vi ‏47 KB

BT Vision+box update

I have a spare bt vision+ box that is used for freeview only. It recently showed that it needed an update but failed to download the update tool as it was not connected to broadband and turned itself off after numerous attempts to download the update tool. I connected it to broadband and it successfully downloaded the update tool and advised box is being updated and will restart when the new software has been installed but the box remains in standby with the blue light on and the remote not functioning. Any advice would be appreciated.

Hi franny,
Just curious. How Long did you leave the STB in that state ?
From my experience, after an update, it does a hard disk check, which sometimes can last for about 20-30 minutes.
Is this issue seen even after you reboot the STB manually ?
If that doesn't work even after waiting for so long, I suggest you factory reset your STB by re-powering it, and holding the Left + Down buttons on the front panel, until you see the update screen again.

NEW VISION BOX UPDATE IS USELESS

i have recently had the new update
it worked for a while until tonight 15/11
now it is worse than ever
the lights flash on the remote but no response from the Vision Box
all i get now is a green screen and nothing else
i have rebooted a few times unlugged a few times but nothing it tries to reinstall upgrade
then goes straight back to green screen
this new mBOX must have cost BT millions to get ready and produce
i take it it has never been tested before being thrown at everyone
this is a great advert of the best BT can offer
Solved!
Go to Solution.

Today I received a message on my BT Vision box advising that in 30 days time my box will be updated to the new look software. I am currently on the old style software which has been working perfectly and have Sky Sports and ESPN.
After reading this forum and also seeing the sticky post admitting that BT know the software has issues I am concerned.
Why do BT continue to update current customers boxes when they know that the software has bugs (see below thread from BT) and testing for the fixed software has not been completed?.
community.bt.com/t5/BT-Vision/Recording-problems-on-New-Look-BT-Vision/td-p/652204
Surely they dont want even more current customers to have the known issues than is necessary?
This seems completely stupid to me and surely once the crashing problems etc were found BT should have stopped the roll out of the new look until the issues were fixed in a new version of the software?. This clearly is not the case.
Please can a moderator respond. I will only be happy to receive the new software if the problems have been resolved.

BT Vision box update is RUBBISH

How rubbish is this? After a week of having a call logged with BT Vision, because my box wont scan for channels since the update, what happened? Nothing. No message, no progress, no help at all. Obviously BT don't give a sh*t and just after I upgraded to Infinity. I give up. Off to Sky, which I'm gutted about.

Hi Rhodwindsor,
Sorry to hear that your Vision box isn't scanning for channels, following the update. I will be able to look into this for you. Please could you send me in your details using the link found in the "About Me" section of my profile?
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

New 2011 Imac out of box, updated software now wont boot up? Ive had this machine for 24 hours!

Brand new out of box Imac 27" Booted up ok. Downloaded/updated software and prompted restart and now no screen? Makes the boot up noise but screen remains black? Any ideas or others with similar problem? Very dissapointed in product considering Im replacing my older Imac of 3.5yrs (out of warranty) with faulty hard drive.

Unplug it. Wait 2 minutes (don't rush it). Plug it back in. Power it up. Have patience during the first startup.
If the computer hasn't booted to the desktop (or the login screen if you have auto login disabled) within 5 minutes, considering that it's brand-new-out-of-the-box, call Apple and schedule a repair appointment at your nearest Apple Store.
I know it's annoying that you might have a lemon, but it does happen - don't give up on Mac because you got the one bad Apple.

Check boxes -Update many Items

I have a list of Construction Specs and want to have one form
with check box that when = Yes or 1 = dontshow item
The form has a check box with each item
The action update form does not update the database I get an
error:

There are a couple of issues:
First, your error is because your not naming your hidden
project ID field:
Your entry:
<input type="hidden" value="#projectid#" maxrows=1>
Correct Entry:
<input type="hidden" name= "projectID"
value="#projectid#">
Next, when using a checkbox, if the user doesn't check it, it
will be undefined on the action page. You will need
to check for its existance, something like:
<CFSET ShowSpecs = 1>
<CFIF IsDefined("form.dontshow") AND Form.dontshow EQ
1>
<CFSET ShowSpecs = 0>
</CFIF>
Then use ShowSpecs when checking if you should show the specs
or not

YouView Box Updates

I've just given BT 30 days notice to cancel my BT TV essentials package, do you still get software updates from YouView.

If you originally obtained the box via BT, then updates were delivered via BT, not YouView, and ironically will continue to be delivered via BT even though you no longer have an active BT TV contract.

Partial Page Refresh - Text Box Update

Hi,
I have a page where there are numerous regions, each containing two or more text fields. I want these to update periodically using partial page refresh.
I have got the partial page refresh working but my text fields are not being updated. How would I get them to update? I know I can't call a page process from javascript, only application processes.
Cheers
Simon

Hi John,
I think you'll need to create two dynamic actions. One of type PL/SQL block with null; as the source and enter the items to submit. The second is the Refresh Region Dynamic Action..
Martin
http://www.talkapex.com

B.T. Box - Resets, freezes, Constant Updates, etc....

The problems I have with B.T. are getting too annoying, what am I paying for? The following are a few of the problems:
Slow response from the remote control, so when you think it hasn’t registered you click it again and again, then, it catches up and does what you pressed twice or more.
T.V. box freezes so you have to reset the box which takes a few minutes at a time, which is annoying when watching live performances in particular.
Box updates itself when it wants, usually at inconvenient times, during a football match or other live performances.
When recording a programme it sometimes continues recording for hours, so later, when trying to record a different channel, it won’t because it can’t record 3 programmes at the same time.
When I was recording a series link of 8, the sixth recording, instead of recording the hour long programme I wanted, it recorded the news for half hour which wasn’t even at that time.
When trying to go back, the |< symbol, instead of going back 10 seconds it goes back to the start of when I turned to that channel.
This has mostly gone on since I’ve had the box and was rather hoping that with all these software updates I was getting that it would be put right. A couple of months ago I was talking to one of B.T. Customer (don't really) care people, and spent about 40 minutes doing a factory reset and was ASSURED that this would stop the slow response and that, “It will never happen again” but it does and is getting worse. So what I want to know is do other people have ALL these problems or is it my box and either way what will B.T. do about it? And I will not be accepting a factory reset as an answer again. I never had anything like this sort of problem when I was with Sky.<script src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/cc7e4548/background/helpers/prefilterHelper.js" type="text/javascript"></script>

Hi retired58 and homerhotspur,
Thanks for posting. Sorry you’re having problems with the v-box resetting etc. Take a look at My BT TV box is slow and freezes for help with this. Let us know how you get on.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Sky+ HD box broken since recent software update? what to do?

I'm going round in circles...SKY+ box now is not working since software update !.. I've been on the phone and online chat about the broken sky box ( account and box approx 3 years old ). I spoke to someone on chat who re-negotiated my package "cheaper" which was very nice but a bit pointless without a working sky box...was advise he would transfer me to different department to discuss replacement of the sky+ box, got through to other department and they had no idea why I'd been put through to them had no record of my previous conversation .. and unable to help!.. Yes I'm now getting agitated !.. phoned 03442 414 141 instead, on his advice and they said we can give you a new sky box for £214.00 ! , or get multiroom? for another £11 a month?? not helping ... annoyed as prior to the sky software update the box wasnt the problem !... Ive been then trying the fix by following the solutions online to still be in the state of amber light and no sky TV.... it then directs me to an engineer call out at £65. Who apparantly will either fix the old box ( until the next time ) or replace it with a refurbished one ? Obviously looking on e-bay etc you can buy boxes for between £10 to £40 ...feel annoyed why as a customer for well over 14 years I'm being shoved away at a massive cost to myself. Oh and look... a new customer could potentially have £125 from being recommend via friend, TV or Tesco /M&S £100 voucher... I'm annoyed and what do I do next ?.....

Same problem for me, 1TB Sky box. Box updated on the 22nd of July 2015. Scheduled recordings now do technical fault 7 (33) picture breaks up on play back, but not all the time. Others fail with fault 10. Done the full software, re-download (backup and switch on), new install, planner rebuild. Even down to a full system reset. All other features work. On demand works only if I let it download to 100%. Try any sooner and TF7 (33) faults again. All I can think is the update is causing excessive CPU usage. Call out this Sunday bringing a reconditioned box. So if it's same 1TB and same EPG I might get the same problem. I'll post more after the engineer had been.

While creating po, the vendor material no should updated in PIR.

hi all,
i am facing one issue
the issue is, while creating po, we can search the material no according to vendor material no, but when we change the vendor material no in po item details in material tab and save the PO, that is updated in the PIR, if we tick the box(info update), that means the new no is update in PIR,
but suppose i entered the wrong no, so i want to edit that field again. but the new assigned no is not updating the PIR though i have checked the check box(info update)
that means, PIR is updating once but not second time. what is the possible solution.
regards,
susanta
Edited by: susanta bindhani on Jun 26, 2008 8:27 AM

hi pankaj,
read the issue perfectly,
supoose i have created PO, i have entered in the field of vendor material no-123, ok. and i tick the box(update PIR).
then i save the Po, i saw the change in PIR- 123
after i gone to change mode- me22n, thr, i again change the vendor material no to 456, ok, and i save the PO, then i saw it in PIR,
but no change. the field no is showing -123.
my question is why PIR is not updating second time only once.
pls give me some suggesion, my client need it urgantly.
regards,
susanta

Unable to perform update with Sony Bridge for Mac

I have not been able to update my Xperia Z1 (model C6906) through Sony Bridge for Mac.
While attempting this in SBM version 3.5 the following messages would appear:
There was an issue with the update engine. Please contact technical support. (reason:failed to start local server)
then:
There was an issue with the update engine. Please contact technical support. (reason:failed to parse installer XML(code 11))
SBM has now updated to version 3.6(3602) and still no luck. The software is able to download the update engine but then remains stuck in the initializing phase, talking to update engine.
My phone is at build# 14.1.G.2.257. The proposed update seems minor, as the build # doesn't change but it would be great to have this issue resolved in time for kitkat 4.4
There doesn't appear to be a problem with the phone as the staff at the Sony Store were able to perform my initial out of the box update with PC Companion.
My Mac is running OS10.9 and the java version is 1.6.0_65
Any advice would be much appreciated

In the mean time it would be worth updating the version of java you are running on your MAC:
http://www.java.com/en/download/help/mac_java_update.xml
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Will reseting my iPhone 4 update it to iOS 7?

Will reseting my iPhone to factory settings (Out of the box) update me from 6.1.3 to iOS 7?
I don't want iOS 7, but every app (Even system apps, app store, messages, phone) get frozen and then crash when I open them, I tried many things that I found to try and fix this, but it keeps happening, I have 4.1 of 8 GB of free memory, the lockscreen also thats forever to let me start typing when I go to it or turn my phone off and make on (Or takes forever to let me slide it if I turn passcode off) my girlfriend who has iOS 7 is having the same problems, and so are many people I know who have iOS 7 or 6.1.3

No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

Logic studio box i purchased 3 days back is not working???help needed

Guys,i just purchased logic studio from a music and pro audio store and it ditched.annoying!
opened the box updated the mac os and inserted the first installation dvd that did fine then i was asked to insert the second disk which is audio content 1 that also did fine and then i was again asked to insert the first installation dvd so i did and then i got the installation failed message.I tried 5 to 6 times just did everything possible but it never proceeded.. updating software formatting my mac etc etc.. how to go about it?? should i ask for a replacement or is it possible to run the app ??apple customer care says its better to replace either from the store i got it from or apple directly.
help asap asap--
thanks

See my reply to your duplicate post here:
http://discussions.apple.com/message.jspa?messageID=9506999#9506999

Box updated

Similar Messages

Maybe you are looking for