Boxes are not printing after taking print out

Dear All,
i have developed a script ,which contains some rows and columns.To display rows and columns i have used BOX command.In print preview all boxes are coming properly,but if i take Print out(Even in PDF view also) some boxes are not printing.What would be the problem here?
with regards
Naresh

Hi friend,
There must be some problem in printer settings
or
Try reducing the size of the box and see because of the size also printer may avoid the boxes.
Just try these both i think either one of the both must be a problem.
Still did not get the desired output please revert back to me. I will help you.
Thanks,
Sri Hari

Similar Messages

Rules within sequence are not completing after user logged out.

We have been noticing since yesterday that rules within a sequence not being completed when user logs off planning.
A. User kicks off a sequence from planning. This sequence has 4 rules.
B. Logged off either after launching or after waiting few minutes and logged off.
C. Next rules do not start and we noticed session is ending from AAS.
However user closes browser sequence completes. Yes sequence has no errors. It was working fine until last week and only change was 'NETDELAY' value. Changed from 1500 to 60000.
Not tried from SmartView yet.
Edited by: venuramini on Jun 22, 2009 5:40 PM
Corrected typo in title.

Reason for changing from 1500 to 60000 was, do not remember exactly, issue with MS Excel connectivity. We implemented long ago in dev but never updated other environments.
As far as other HBR_MAX_WAIT_FOR_RULE and HBR_MONITOR_DELAY we have tried and did not achieve desired results.
FYI: we are using Planning 9.3.0.1 and wanted rules running longer than 60 minutes to go in background mode. But above setting would not be useful for 9.3.0.1.
Am I confusing you?
More info of original issue: Business rules time-out. Planning 9.3.0.1
Since then, we have increase web session time-out to 720 min (12 hours), in-activity session timeout to 720 min to let sequence complete even if user session timed out.
Thanks!
Venu

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

All the Google toolbar buttons(other then print) are not visible after installing Firefox 4

Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

My other mail boxes are not visible in mail after upgrading to Mountain Lion

my other mail boxes are not visible in mail after upgrading to Mountain Lion

In the mailbox panel move your cursor slowly down the right hand side . Should reveal show and hide.

Hyperlinks are not functioning after publishing

I am running iWeb 3.0.4 and am publishing to my host site through GoDaddy.com. The hyperlinks work fine in iWeb itself, but after I publish the site and then go to the site to check it, some hyperlinks work, but most don't. It appears to be very random which hyperlinks are working and which are not. After Enabling hyperlinks in iWeb and checking the box Make hyperlinks active, I am choosing to Link to > One of my pages. All seems to be in order but again, after publishing the site, only some hyperlinks work but most do not. I have tried modifying little things in iWeb to see if it will help upon publishing - over and over and over again - but to no avail. I cannot stress how irritating this problem is, not getting the site to work after publishing!!! UGH!
I've seen other posts regarding this issue and still have not found an applicable solution or at least one that is fixing my problem. Any other suggestions? Thank you.

Thank you guys so much - specifically Old Toad, Cyclosaurus and Roddy - for helping me figure out what's wrong with my iWeb site! Just these little things you guys are suggesting are helping me slowly fix these subtle problems. I don't understand why these things that you guys are suggesting aren't explained somewhere in iWeb.
Because of your help I have been able to most of the hyperlinks to work now, but still not all of them. Still seems like I have to do some tweeking and moving around some of the text. I can't believe how inaccurate and inefficient iWeb is!
Anyway, Cyclosaurus - is there any way to shrink the size of the Canvas element so that I don't have to keep adjusting the text just to get the hyperlinks to work?
Thanks again!!

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

How to fix "OS X Lion user's custom preferences are not retained after reboots"?

How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping. Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup. Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained. If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
*NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards? So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

Check boxes are not appearing on ACC

Hi Guys,
Do you have any idea, Buttons and check boxes are not appearing on ACC when i open a ACC -> TOOLS -> PREFERENCES
It opens Edit Preferences popup.
I want to check the box for show expert level information. But check boxes are not appearing.
I would lilke to attach image here. But no idea how to attach the image for this thred.
Thank you

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed.

Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

Head phone volume controls are not working after updating to ios 6.1 y?

head phone volume controls are not working after updating to ios 6.1 y?

I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

Text boxes are not visible

Hello. A page in my InDesign document appears to be broken. Text boxes are not visible, they can only mark if I choose command + a. Then I can copy the object and paste into another document in which they appear. You can not delete the page when the crash program. What could be wrong?

Re text boxes not visible try: View > Screen Mode > Normal.
It's not a good idea to copy and paste, use Place: File > Place.
Re your crashing, maybe you should reset your Preferences.
Derek

Boxes are not printing after taking print out

Similar Messages

Maybe you are looking for