BOXI 3.0 Units of Measure not coming over to universe based on Infoset

We are noticing that the Unit of Measure for Infoset based query objects are not coming over with the base install of the SAP integration Kit. However, it does seem to work after fixpack 2. Can anyone confirm this?

Hi Mark,
we had a separate thread on this already - or ?
for Universes on top of Web Intelligence it has been identified as an issue.
For Universes on top of InfoCubes it works fine.
Ingo

Similar Messages

Error while creating PO -- Unit of measure not defined for lanuage ZH

Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabi

HI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT4910 I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?

I'm assuming you have performed a restore from an icloud backup...
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure".
As for apps, you could always download them again from the itunes store, without charge. Look for the link to purchased apps, there you'll have a list of the ones you can download free.

Unit of measure not craeted in EN

There is an item in matl master (R/3)with micro liter as unit of measure . The same product has been checked in COMMPR01 in EBP , where in microlitr is extracted from back end . I checked the language and it is in English.
Also I checked for unit of maesure both in T006A in R/3 and EBP with english as language .We r using SRM 5.5 with ECC 6.0.
But while selecting that material for creating shopping cart it is giving error as
'unit ML is not created in English language'.
The ISO code for micro liter is 4G.
Please help me ..
Thanks in advance
SK.

..

QM_Change of base unit of measure not possible

Dear QM Experts,
Scenario is,
1.     Material master created with QM view activation.
2.     The Base Unit of Measure kept as EA
3.     Inspection plan prepared for material with usage 5 and status 4.
4.     Material has not undergone any purchase order / production order / routing or any other transactions except inspection plan.
5.     No movements have done and the stock is zero
6.     The requirement is to change Base Unit of Measure from EA to KG
When tried through MM02 system throws an error message as The base unit of measure cannot be changed; choose "Display errors" Message no. M3189
When viewed through log another information gets displayed as Routings already exist that are assigned to the material. Task list type Q.
I tried through trial and error method. First material assignment was deleted from task list, problem did not resolve. Thereafter deletion flag put to task list. No impact. At last entire task list deleted. Still system does not allow changing unit.
Has anybody faced the same problem ever? Whether deletion of task list (By T-Code QSR6) from data base will server the purpose? What are the obligations that one must follow while execution QSR6?
Or if there is any other solution to this requirement?
Thanks in advance
Best Regards,
Anand Rao

Hi
*What are the obligations that one must follow while execution QSR6?*
By this T code Deletion is very much possible provided that
If there are no stocks of the material in the current period and in the previous period
If there are stocks in the previous period, you can clear them as follows:
a) Post the stock in the previous period to the current period (for example, using movement type 561) so that the stock for the previous period is the same as the stock for the current period.
b) Clear the stock with the posting date in the previous period (for example, using movement type 562).
If no purchase requisitions, purchase orders, or scheduling agreements exist for the material
Material Is used in any task list/Rauting.
Now as per your schenario I hope you have checked Inspection lot & PR,PO.
Error showing Q type of task list.
Go to PLKO & MAPL table for this material & group & Gr counter check the entry.
Check deletion Indicator in both the tables. If it has status "X" then this task list is very much possible to delete through QSR6.
I hope this will add some value to your Execuation.
Regards
Sujit

Numerator in Unit of Measure not big enough

Hi,
The numerator, field UMREZ, of the unit of measure has a maximun lenght of 5 digits ( maximum of 99999 ). But for certain conversion I need (in MM02-> aditional data->tab units of measure):
120000 EA = 1 ROL
How can I do this without entering something bigger than 99999?
I have thought in three alternatives:
1.- Modification of that data domain, so that it can be stored up to 999999.
2.- Use decimals in the denominator , so that I have something like 12000 EA = 0,1 ROL.
3.- With an auxiliar unit of measure EA2 ( created via CUNI, linked to EA): 10 EA2 = 1 EA :::::and then::::: 120000 EA2 = 1 ROL.
I havent been able to complete the 2nd and the 3rd. ANd I want to avoid the first...
Do you know if something like this can be done? if so, how????
I have found post UOM conversion not big enough but I could not find any usefull answer in there ...
Many thanks in advance.
Aaron

Hi,
Yes, I had already read this note, thanks for the info anyways.
They describe exactly my case:
Example 3: Too large numerators and denominators
                       When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
                       Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
                       Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
But I can not change the Basic Unit of Measure, because the Material has already movements, and I dont know how to create another unit of measure (let say EA2) linked to EA with a the value 1 EA2 = 10 EA. In this case I could use EA2 in the material with the conversion 12000 EA2 = 1 ROLL.
Is this possible? How can I create this unit? in CUNI I can create a new UOM but I dont see how to link it with an existing one ( create a conversion between them ) .
Thanks!!

Converting Unit of Measure (not quantity)

Hello All,
I have an interesting issue that I am not sure how to address. I have done some searching online and through the forums on how to convert unit of measure. Nearly all of the returned entries pertained to converting FT to LB, and scenarios like that.
My issue deals with the data in the EORD table. I created a custom program to create/update numerous source lists using a BDC for transaction ME01. This way the user can enter numerous materials and plants into one program one time, rather than create each source list individually. One such source list has a value in field MEINS as GAL (Gallon). However this is the converted value, this can be viewed in SE16n. If I use SE16, or debug the program, I can see the value in MEINS as GLL. This is the unconverted value. Thus when I create the source list I get an error.
I was wondering if there was a function module I could use to convert the UoM. I know I could create logic to check the value of UoM and if it is incorrect to change it using a custom FM or even in the logic of the enhancement itself. But this could change over time, meaning more units could be added requiring more logic changes. If there was a standard FM I could use, I could implement it once and be done with it.
So does anyone have any advice or know of an FM I could use? I will continue to search for an answer and if I find one I will post. If my question is confusing please let me know and I will clear up anything I can.
Thanks for your help in advance.
Regards,
C.

There is a conversion exit on unit of measure, "CUNIT" (via table T006A) use
CONVERSION_EXIT_CUNIT_INPUT Conversion exit for commercial (3-char) measurement unit INPUT
CONVERSION_EXIT_CUNIT_OUTPUT Conversion exit for commercial (3-char) measurement unit OUTPUT
Regards

Is it possible to manage 3 units of measure (not just 2) using IS CWM

Our customer requirement is to handle the stock in 3 different units of measure.
We have read that with the EHP7 CWM (Catch Weight Management) this is possible but we are not sure if it's possible with 3 units of measure.
If not any other alternative?
Many Thanks
You can contact me at: [email protected]

CWM supports only one parallel unit of measurement as the valuation unit of measure. It however allows adding several unit of measure as in standard ERP system.
Hope this helps.
Baseer

Material condition unit of measure not allowed

Hello Friends,
I am facing error of material XXXX condition ZPPL unit of measure SFT not allowed while creating the opportunity in CRM
Kindly note that I have defined a new UoM in ERP and for this new UoM the sales created perfectly in ERP, i have checked the netweaver settings for ISO codes and UoMs in CRM and they are fine...
Please help me with this

Did you ever find the solution for this? I am getting the same warning message and have no idea why it is defaulting 'ST'.

Maintaining Unit of Measure (not alternative)

Dear colleagues,
I need to maintain a unit of measure (1 BOT is equal to 45 DEG) where we are going to use it for Z programsu2019 calculations, not in standard functions. But I don't want to maintain this ratio under additional data  units of measure because if I maintain then there is possibility of being use this new measure in sales ordersu2019 etc. Is there any other field where I can maintain this ratio without infecting standard calculations?
Regards

I would suggest you need to put logic in Zprogram.When ever program finds this UOM it will automatically converts and will update in sheet.
Maintain UOM convertion in a Z table.This will help if you want to add some more UOM it is use ful to you.While running in Z report it will fetch the convertion from table .

Why will my units of measure not change

I have an old ai file created in CS5 and am opening in CS6 is comes in with cm even though I have changed the units of measure with the file open and also with no files open. Yet every time I open the file it is still in cm. Any ideas?

Hi Jacob,
Tried that already no go. Have tried changing with no documents open, with documents open saved as CS6. All my other files seem fine but this one will not update.
Thanks
Emma
On 2014-07-10, at 11:02 AM, Jacob Bugge <[email protected]<mailto:[email protected]>>

Media/Stock name from an XMPie uStore product not coming over

Hi, I'm having some issues with a print file coming over from uStore to FreeFlow Core workflow to print to a 6180 Docuprint. The job is set to have page 1-2 on thick stock and 3-6 on thin stock all 2 sided. When it arrives at the 6180 it is recognizing sides printed and that there are 2 blocks of exception pages (1-2 and 3-6) unfortunately the stock for both show up as unspecified. I've made sure that the printer's stock library is matching the descriptive name in the JDF node setup in uStore. Nodes in uStore@DescriptiveName="Media Type Thick"@DescriptiveName="Media Type Thin" Names in the printer's stock library:Media Type ThickMedia Type Thin Should the uStore JDF node set have more entries so the the 6180 can properly ID the stock? Or is there a specific naming convention I should be using? Like say no spaces or capital letters?

By default, uStore includes JDF nodes for several paper types, folding and colour settings. These nodes are available when you set up JDF requirements in the Product Properties page. If your job includes additional requirements, such as printing on named stock, you need to create additional JDF node sets. To ensure that your product is printed according to the JDF specifications, make sure that you follow these steps:Create the required property in the Product Properties page.Create the new JDF Node Set. The JDF Node Set that you create is added to the list of options available when you set up JDF requirements in the Product Properties page. See To add new JDF node sets below.Create the new JDF Node. See Setting Up JDF Nodes below.Assign the required JDF Node set to the property options in the Product Properties pageTo add new JDF node sets:Select Presets>System Setup>JDF Node Set.On the JDF Node Set page, click Add New.In the Display Name box, enter a name for the node set. For example, if your product needs printing on SRFRed Stock, enter PrintOnSRFRedStock.Click Save.The Node Set is added to the list and is available in the Product Properties page when you set up customer input controls of the following types: Drop-down lists, radio buttons, and gallery/grid view lists. To make sure that uStore sends the correct information when it creates the JDF file, you need to set up the JDF Node with the required XML code.To add a new JDF node:Select Presets>System Setup>JDF Node.On the JDF Node page, click Add New.In the JDF Node Set ID list, select the JDF Node Set that you want to set up. For example, if you create a JDF Node Set for printing on SRFRed Stock, select the PrintOnSRFRedStock node set.In the Node XML box, enter the XML code for the new JDF node. For example, enter @ProductID="SRFRED".In the Node Target Xpath box, enter the location of node in the JDF file. For example, the Media attribute should be located at //ns:ResourcePool/ns:Media.Click Save.The new node set is added to the list. Every time a product includes this property option, the XML code will be added to the JDF file. For your reference, uStore saves all JDF files at \\[ServerName]\App\JDF. (Thanks to Steve F and Per F for validating this information.)

I have just brought the iPad air and my picture are not coming over from my phone or old iPad??

Can any one tell my why my photos have not come over on the cloud?? Thanks x

Yes I have done that when I hot my phone they just went straight over???

BOXI 3.0 Units of Measure not coming over to universe based on Infoset

Similar Messages

Maybe you are looking for