BOXI R2 Auditing and Performance Management Recommended Database Sizes

Hi,
We have a 8 node BOXI R2 Cluster which we want to enable Auditing and Performance Management. Could anyone recommend what the sizes of these two databases should be in GB? I have to request appropriate disk space from our SAN team, and the databases created with fixed sizes. Also, the databases will be Oracle DBs, if that is relevant.
Thanks!

The amount of space required for Audit DB will be determined by amount of auditing you're goinf to record. Auditing DB will grow quite significantly in a 8 node environment.
I'd start with 1gb and add space as necessary.
With PM DB - it's impossible to say how big it needs to be. It depends on amount of data you're going to put in there.

Similar Messages

  • Dashboard Manager and Performance Manager

    Please share your experiances on this topic. Dashboarding and Performance Management.

    Post Author: Ferhat
    CA Forum: Performance Management and Dashboards
    you have to find the keyword to see...
    i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
    while you install, check the install performance management also(you have to have the keyword).

  • Irecruitment and performance management Questionnaire.

    Hi, Is there any available questionnairs for irecruitment and performance management modules? in order to be used during scoping sessions.
    Best Regards,
    Walid.
    Edited by: user804169 on 31-Jan-2013 05:39

    Hi;
    Please review:
         Frequently Asked Questions on Talent / Performance Management FAQ [ID 461986.1]
    Regard
    Helios

  • What is the difference between personnel development and performance management

    Hi,
    What is the difference between personnel development and performance management in terms of configuration and in  portal level .
    Thanks
    Srikant

    HI Srikant,
    Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
    Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
    hope this will help you.
    regards,
    DInesh

  • SSM and Performance Manager

    I will be migrating a client from Performance Manager to SSM. I understand the capabilities of SSM but have never used Performance Manager. Is these material that compares the two, or even a good description of Performace Manager.
    Thanks

    Hi,
    SAP Strategy Management is the product that is designated as the route for the future and replaces Performance Manager.
    The product has a long history as PilotWorks from Pilot Software prior to the acquisition of Pilot by SAP. It is increasingly being integrated into the SAP/BOBJ environment and with version 7.5 now on general release supports Business Objects Enterprise for authentication and the data in the underlying multidimensional OLAP database (PAS) is available to Business Objects tools through web services. The PAS database can store all the actuals targets etc and you can manipulate this data to reflect your needs. SSM is structured around u2018Contextsu2019 which are a u2018view of the worldu2019 so that you can have contexts for geographical or organisational slices through the organisation which can all roll up all the way to organisational level.
    Regards
    CSM Reddy

  • Error when opening Capacity Planner and Performance Manager

    Hello,
    I am having an error when opening Performance Manager or Capacity Planner under 9i OEM in our environment. I started at the company about 2 months ago, and have not used these tools until yesterday - and just found these errors. Below is a link to a screenshot of the errors. Does anybody have any ideas?
    http://www.webgenstudios.com/misc_images/ora1.jpg
    Thanks,
    -Bob

    Which are the contents of the log file produced during installation of OEM...????
    OEM was installed on its host machine about 4 years ago, long before I started with this company. I don't know if the logs are still there or not. Where should I be looking?
    Do all other parts of OEM operate successfully...????
    Yes, everything besides Cap Planner & Perf Mgr.
    Is this in Standalone Mode or Oracle Management Server Mode?
    The issue occurs in both modes.

  • Comp and Performance management on erp2004

    Hello,
    I am seaking for information if there are new tools in ERP 2004 to implement Perfomance/MBO and comp management on ESS/MSS basis.
    If someone experienced in this it would be graete to give me some feedback.
    Regards
    Andreas
    Message was edited by: Andreas Kovach

    Hello Andreas,
    From a development perspective nothing in relationship to compensation has changed for performance management in ERP2004 or ERP2005.
    Regards and Groetjes,
    Maurice

  • XI3.0 and Performance Managment

    All,
    I have downloaded and installed XI3.0 in a local virtual machine using the Performance Manager BOE Premium Bundle license key from ESD. It all installs fine but I get no EPM demo dashboards (Total Electronics).
    I do however have in C:\Program Files\Business Objects\Performance Management 12.0 various folders including one called demos. In XIr2, there used to be a BIAR file to import the demos but I cannot see the same in XI3.0.
    All I can find are XML files in a demos>>dashboard folder, XML files in demos>>dataconnections folder and the usual 7 universes in the demos>>universes folder.
    Anyone know how I get this demo content installed ?
    Andrew

    There is no demo actually.
    Performance manager and Dashboard analytics are both wdeployed into the tomcat webapp folder.
    You can try some in the performance manager through infoview and need the license for the analytics catalog in infoview

  • XI3.0 and Performance Manager

    Post Author: andrew.r.fox
    CA Forum: Deployment
    All,
    I have downloaded and installed XI3.0 using the Performance Manager BOE Premium Bundle license key from ESD.  It all installs fine but I get no EPM demo dashboards (Total Electronics).
    I do however have in C:\Program Files\Business Objects\Performance Management 12.0 various folders including one called demos.  In XIr2, there used to be a BIAR file to import the demos but I cannot see the same in XI3.0. 
    All I can find are XML files in a demos>>dashboard folder, XML files in demos>>dataconnections folder and the usual 7 universes in the demos>>universes folder.
    How can I get this demo content installed ?
    Andrew

    There is no demo actually.
    Performance manager and Dashboard analytics are both wdeployed into the tomcat webapp folder.
    You can try some in the performance manager through infoview and need the license for the analytics catalog in infoview

  • Audit and Performance

    Does anyone has technical, graphical or other information about performance loss by using audit trail options?
    Regards,
    Marcio

    It will depend significantly on what you decide to audit. If you're auditing every SELECT statement, the overhead is going to be a lot higher than if you're auditing every connection. It will also depend on the type of system you have-- auditing SELECT statements in an OLTP environment will be much costlier than auditing SELECT statements in a DSS environment because of the sheer number of statements and their general complexity (adding a few ms to audit a query that's going to run for an hour vs adding a few ms to audit a query that's only going to run for a few ms).
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • OM and Performance Managment not syncing up.

    Hi Experts,
    I want to see all the reportees reporting to the manager when i run the appraisal document (standard report) but i couldn't see all. In organizational mgt i can't find any errors.
    But i couldn't see the indirect reportees for the manager when i run the appraisal document.
    I don't know where the problem exist. Please guide me in this.
    Regards,
    Subramanian.

    If you're talking about PHAP_ADMIN t-code, you can actually see all the forms of a manager's subordinates by selecting his name under the "Appraiser" field in the selection screen. (this is provided that when you create the forms you put the manager as the appraiser)

  • Black box (line) surrounds and follows mouse, 'mini' screen size, PIP?

    Hi,
    I just tried to install the new wireless mighty mouse and wireless apple keyboard.
    The mouse worked for a minute, but the install of the keyboard killed the BT mouse and now there's this ANNOYING black box around the mouse cursor.
    After playing with it I've noticed that the pointer cursor, which is surrounded by this box (4:3 ratio box, approx 2" wide by 1.5" tall on my 20" 1600x1200 monitor).
    The odd thing is the cursor's position within this box moves in correlation with where on my overall desktop the cursor is placed: If I put my cursor in the upper right corner of my whole screen, the mouse cursor is also in the upper right corner of the small 'box'; if I move it to the lower left of the screen, it is also in the lower left of the box, and so on for the other two corners, and if it's in the middle of the screen, it's in the middel of the little black box.
    So this seems very strange.
    Oh, and neither the BT keyboards or the new mighty mouse BT will show up in the BT menu as recognized devices, though they did just briefly in the beginning.
    So after buying a new USB hub to be able to plug in the Apple/Belkin USB hub along with the Apple store's D-Link USB Bluetooth adapter and a new BT keyboard and mouse - $200 for a wireless keyboard and mouse, all I have is ultra annoying new software problems and all the same wires as before, with an additional keyboard and mouse on my desk. UGH!!!
    Can anyone help with this 'black box around the keyboard issue, at least?
    Thank you soo, so much for any solutions!
    Sarge
    Oh and this weren't enough my barely used video ipod video 60 GB self-distructed this AM - melted inside somehow. I am in Apple ****.

    GREEN STAR FOR YOU!
    Of all the things - somehow, and I've never even been into this control panel, inside the Universal Access/Seeing/Options dialogue, the box was checked saying "Show preview rectangle when zoomed out".
    I unchecked this, and it went away. I had not selected this, ever. How it happened, I don't know except that I do have a Logitech NuLOOQ tooldial device which I had unplugged from USB while troubleshooting my BT wireless keyboard and mouse, and this device requires having the 'enable access for assistive devices' checked in the Universal Access control panel.
    Perhaps unplugging that device somehow lead to this problem, but otherwise I've never 'visited' the UA pref panel or checked anything in it.
    Odd, but THANK YOU for the suggestion!!!
    Sarge

  • Lite Database Size

    I am using Oracle Lite and was wondering how much should be the max databse size after that itn runs into probles and performance degradations.

    lite database size is same as oracle 8i except that lite stores data in a separate local file with .odb extension.
    we are using both 8i and lite on few projects...
    we havent faced any distinction between 8i and lite in terms of performance so far...
    yugandhar

  • Performance Manager  and Data Gatherer

    Hello,
    I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
    Thanks,
    Jeff Graham

    Post Author: Ferhat
    CA Forum: Performance Management and Dashboards
    you have to find the keyword to see...
    i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
    while you install, check the install performance management also(you have to have the keyword).

  • Employee Performance Management in SAP Portal

    Hi,
    I would like some advice on the best possible way of implementing Performance Management through SAP Portal. What do you suggest?
    I was reading about MSS business packages and it comes with two iviews: Status Overview and Performance Management Document; is that all that is necessary to complete the performance process through portal ? I imagine the appraisal documents gets updated and some workflow is configured for approval and review cycle.
    Well, any documentation, or experience you can share with me will be very useful.
    Thanks
    Ivan

    There is a lot of configuration on the SAP side that needs to be done.  I suggest hiring an experienced consultant and save your time and headaches.  Also, watch out for Portal and SAP upgrades.  They don't always offer a migration tool and you may have to re-implement somethings after an upgrade of one or the other.  Annoying.

Maybe you are looking for

  • FCP 7 Updates (7.01 to 7.03)

    I had to e-install FCP 7 on Mavericks and was wondering how I might be able to obtain the 3 updates as they are not indicated by the Software Update.  Thanks.

  • Problems because multiple AppleIDs and no help from iTunes Support

    I am a VERY frustrated owner of 9 separate Apple computers/iPads/iPods/iPhones.  Over time, I have been forced to change my AppleID on 3 separate occasions (non-e-mail to one with e-mail, non-me.com to an @me.com to move my mobile me to iCloud), and

  • Wire transfer payment set up for US

    Hi Has anybode worked on wire transfer set up for US company code ( International payments ) ? Where can I get documentation on this subject ? Regards Raj

  • What table is the contract number stored for Limit POu2019s

    Hi, I wanted to know the table name where the contract numbers are stored for the Limit PO? Are there any specific tables where contract numbers are stored. Thanks in advance. Regards, Deepak BR

  • Skip a record at Infopackage level

    Hi all I need to skip a record at infopackage level due to a problem in processchains and we dont wont this to be repeated again, could someone help me with the code for this Will  definetely assign points Chris