BOXI R2 sp2 installation error

I am trying to install BOXI R2 sp2 on a windows 2003 server. The installation files unpack and the installation begins but then gives an error that the installation was interrupted before it could finish.
I have rebooted. Restarted the install. Not sure what could be causing this error.

What's in the install log?
The log should go to <$INSTALLDIR>/logging? Also, is there anything in the Event viewer (assuming you're installing on Windows)?

Similar Messages

Crystal Reports 2008 SP2 Installation Error

Howdy Folks...
I have been trying to install the SP2 for Crystal Reports.
I get the following error...
"The installaion source for this product is not available. Verify that the source exists and that you can access it."
Running the downloaded file, unpacks the contents, starts the installer, then the error message is displayed.
System is with Windows Vista SP2
Your help and advice is needed...
Thanks,
Jim

Yes, mapping the network drive on the install PC works, technically. Unfortunately, it doesn't resolve my core problem for two reasons.
1. I'm trying to make the install procedure as touchless as possible for an install base of potentially hundreds of users. Having them all map a network drive would defeat the purpose.
2. I oversimplified the explanation of my situation to make the question easier to ask. We actually have a home-grown, web-based client software distribution tool from which I'm trying to setup the installation. The network drive, and generally all details of the installation are transparent to the installer, so that's another strike against mapping the network drive.
Here's the command line script (nothing fancy) and the code of the supplemental .ini file that I'm using. (This assumes that the self-extracting Crystal SP2 file has already been extracted and that I'm working directly with the setup.exe, setup.ini, and package files.)
And to reiterate, this scripting procedure has worked like a charm for Xcelsius SP3 and Crystal SP1. It just falls flat on its face for Crystal SP2
Batch Script:
setup.exe -r Crystal2008SP2.ini
Crystal2008SP2.ini:
[OTHER]
QUIET=/qb+
[INSTALL]
CLIENTLANGUAGE="EN"
DISABLEWEBUPDATE="1"
ENABLELOGFILE="1"
INSTALLDIR="C:\Program Files\Business Objects\"
REINSTALL="ALL"
[FEATURES]
REMOVE=""
ADDLOCAL=""
ADDSOURCE=""
ADVERTISE=""
Thanks,
Josh
Edited by: Josh Crawford on Jan 20, 2010 8:44 AM

Crystal Reports SP2 installation error

Howdy Folks...
I have been trying to install the SP2 for Crystal Reports.
I get the following error...
"The installaion source for this product is not available. Verify that the source exists and that you can access it."
Running the downloaded file, unpacks the contents, starts the installer, then the error message is displayed.
System is with Windows Vista SP2
Your help and advice is needed...
Thanks,
Jim

Hello,
Go to Control Panel, System, then click on the Advanced System settings on the left. Advanced Tab and then in Performance click on the Settings button. You'll see the DEP tab.
If you have an IT department they can push out and modify the Administrator roll and reduce your abilities to install software. Check with them.
Other than that all I can suggest is you purchase a support case and get help determining why you cna't get SP2 installed.
Did you install the orignal or someone else do it for you? Try turning UAC off while you install SP2, it may be blocking you, and I've had this happen to me before, no errors or warning, it just would not install of it it did only some files were updated.
Thanks agian
Don

SP2 installation error

I get an error when trying to install Xcelsius 2008 SP2, it cannot located the xcelsius.msi file. Why did it work on my laptop but not on my desktop? Please help me, there is nothing in the installation instructions that explaines this message!!!! How do I install the service packs? Is there a dowload version that includes the latest version of XC2008?
Thanks,
Hans

Hi Hans,
Are you upgrading from SP1?
We had a bit in the SP2 annoucement (that I have just added as an extra note to [FP 2.1|/thread/1518318 [original link is broken];) that read:
Note: Before installing FP 2.1, if you upgrade from SP1 to SP2 you need access to your original SP1 installation files from the original location otherwise you will be prompted to locate Xcelsius.msi from the original SP1 installation (in the SP1 installation packages folder).
Regards
Matt

Device Installer error - Windows could not load the installer Image.

I am windows XP and have loaded new Itunes 7.7 and the Iphone 3G I just received cannot be recognized by my PC/XP I get a dialog box saying
Device Installer Error
Windows could not load the Installer Image. Contact your hardware vendor for assistance.
OK
Of course it is not OK hence why I am here seeking help from this fine community of users of superior Apple products

Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
using LANDesk to deploy it. All methods are failing.
I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
Microsoft Updates before this one.
When I try Microsoft Update, I receive the following error:
Code B56 Windows Update encountered an unknown error.
Below is the WindowsUpdate.log excerpt:
2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler :: START :: Handler: MSI Install
2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
2013-08-06 12:46:42:265 112 600 Report Uploading 2 events using cached cookie, reporting URL =
http://wsus:8530/ReportingWebService/ReportingWebService.asmx
2013-08-06 12:46:42:358 112 600 Report Reporter successfully uploaded 2 events.
2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
2013-08-06 12:47:52:012 112 938 AU >>## RESUMED ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
2013-08-06 12:47:52:012 112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
2013-08-06 12:47:52:012 3952 dc4 Handler :: END :: Handler: MSI Install
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
2013-08-06 12:47:52:168 112 5c4 Agent *********
2013-08-06 12:47:52:168 112 5c4 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-08-06 12:47:52:168 112 5c4 Agent *************
2013-08-06 12:47:52:168 112 938 AU Install call completed.
2013-08-06 12:47:52:168 112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-08-06 12:47:52:168 112 938 AU #########
2013-08-06 12:47:52:168 112 938 AU ## END ## AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
2013-08-06 12:47:52:168 112 938 AU #############

I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system. Researching the errors I got led me to discover the following:
1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update. Some were able to get it installed by first doing a Repair on Office 210 itself
first, and then installing SP2. But many others have not been able to install it at all.
2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory. This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
during the installation. Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
I am one of those people.
I found a posting that described a way to recreate MSOCACHE from the source CD. I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file. I found the file on the CD and
pointed the installer to it, but it said the file was not found and quit. So my install still failed.
The last response I got at the Microsoft Answers site was to wait until SP2 is debugged. It's not clear to me this will ever happen, but we'll see.
Birk Binnard http://www.birkbinnard.com

Installation Error SAP NW CE 7.1 Java on Windows 2003 SP2

Hi folks,
I am getting an installation Error when trzing to install the Preview Version of CE7.1
Installation will terminate in Step 28 of 34 with the Message
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Anz Ideas how to terminate the Installation_
Best Regards
Chris

Hi,
I solved the issue bye updating jvm manually. Both jspm and update manager didn't update successfully.
Thanl you for your support.
Resolution (to support adobe document services for my specific instalaltion)
Check JVM version in Netweaver u2013 open file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf. See SAP JVM version
(e.g. sapjvm version: 5.1.055)
If SAP JVM version is earlier than 5.1.0.55 apply the patch from SAP Note 1469491:
1) Download patched JVM from the link provided in SAP Note 1469491 for
required platform
2) Unpack downloaded SAR archive using Netweaver SAPCAR tool
3) Check JVM version and platform in file sapjvmmanifest.mf. E.g.
sapjvm os: NTintel
sapjvm version: 5.1.055
u201Csapjvm osu201D should be the same as in the installed NW JVM u2013 see file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf
4) Stop Netweaver services
5) Substitute Netweaver JVM folders
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvm_5 and
c:\usr\sap\<NWinstance>\SYS\exe\jvm\NTI386\sapjvm_5.1.0xx by SAP JVM
from the patch package
6) Start Netweaver services

German localization of SP2 Installer - I want my zipped-jar-distr ibution back!

Hi,
did anyone try this fancy installation software for the WL6.0 Service
Pack 2? Actually I would prefer the old WL5.1 way of distributing a
service pack (zip file with a readme and lot's of jars) instead of this
piece of software. The localization is really bad, the texts do not fit
the dialogues, german umlaute (ä,ü,ö) don't work, hey, this is Java,
isn't it? Why don't these guys use Unicode?
During installation I always get the error message 'Der Pfad des BEA
Basisverzeichnisses ist' ('The path of the BEA root dir is'). Is what?
Seems the important point is missing :-)
Can I download a non-exe-file installation routine somewhere? Something
really oldfashioned which lets me put my installation exactly like I
want it to be where I want it to be?
Thanks
Daniel

Hi Bertrand,
this is what I was afraid of when about half a year ago Michael Gridley
mentioned that WL6.0 would have this kind of 'convenient' installer. The
old system needed some time unil one would get used to it, but the only
problem I ever heard of was that real java novices would run into
problems with classpath settings. Beside that it was clear, transparent
and did not make too many (probably wrong) assumptions on the
installation environment.
Now we've got this black box of an installer which is probably good for
marketing but from my point of view not a gain from a developer's
perspective.
I really hope that WL6.1 will have an installation mode which proves
this negative view wrong.
Cheers,
Daniel
-----Ursprüngliche Nachricht-----
Von: Bertrand FOVEZ [mailto:[email protected]]
Bereitgestellt: Dienstag, 12. Juni 2001 13:32
Bereitgestellt in: install
Unterhaltung: German localization of SP2 Installer - I want my
zipped-jar-distribution back!
Betreff: Re: German localization of SP2 Installer - I want my
zipped-jar-distribution back!
Hi,
I'm a french developer and I experienced such poorly localization too.
Actually, the french-localized option does not work at all. We must
choose
the english localization in order the installation program to work.
Beside, the english-localized program works fine.
So far, so bad...
Bertrand
"Daniel Hoppe" <[email protected]> a écrit dans le message news:
[email protected]...
Hi,
did anyone try this fancy installation software for the WL6.0 Service
Pack 2? Actually I would prefer the old WL5.1 way of distributing a
service pack (zip file with a readme and lot's of jars) instead of this
piece of software. The localization is really bad, the texts do not fit
the dialogues, german umlaute (ä,ü,ö) don't work, hey, this is Java,
isn't it? Why don't these guys use Unicode?
During installation I always get the error message 'Der Pfad des BEA
Basisverzeichnisses ist' ('The path of the BEA root dir is'). Is what?
Seems the important point is missing :-)
Can I download a non-exe-file installation routine somewhere? Something
really oldfashioned which lets me put my installation exactly like I
want it to be where I want it to be?
Thanks
Daniel

What is the BOXI 3 SP2 equivalent for ReportDocument and ParameterValues?

I need to convert code from BOXI to BOXI 3 SP2.
What is the BOXI 3 version of BOXI crystalDecisions.CrystalReports.Engine.ReportDocument?
What is the BOXI 3 version of BOXI CrystalDecisions.Shared.ParameterValues?
I'm a newbie in business objects, so any help would be appreciated.

The ReportDocument SDK hasn't undergone huge changes between XI and XI3.1. You should have the Developer edition of Crystal Reports 2008 installed on your dev machine, after the installation of Visual Studio. Apply the latest service pack (it's necessary to patch to at least SP1 if you want to do anything that hooks into Enterprise). Check your project references to make sure they're the right version (12.x). Recompile and see if you get any errors.

ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)

I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.

Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

BO XI 3.1 Enterprise SP4....Installation error messge

Hello Team,
I am getting the following Error message while trying to install the Service pack 4 for XI 3.1 . Following are the error message"The install was unable to connect to the CMS. Please ensure the existing CMS hostname and port are correct, and try again". Following are the steps i take:
1. Create another SAI with different port number but it did not help.
2. Copy the Installation on local drive and run the set up , still the same error.
Environmental Details:
BOE XI 3.1 SP3
Windows Server 2008 sp2.
SQL server 2005 CMS database.
SP3 was succesfully Installed on the same machine in Dec 2010. There has not been any change in database or in server apart from the Monthly Windows updates.
I even created the Ticket with SAP but they are telling to roolback to old windows update which is impossible as the server team applies the updates everymonth.
It would be great if i get any assistance.
Regards,
Sonu Pandita

Hi,
We are trying with BOE XI 3.1 and SLES 10 SP2 : Same error with Oracle rep or Mysql bundle.
Symptom:
     "[error] [PostInstallScripts::WaitForCMS] CMS is not started, giving up." while installation of BOE XIR3.1 on SuSE Linux Enterprise Server 10 SP2.
     On the log file called BusinessObjects.12.1.log.summary under the path [installdir]\setup\logs contains the above error message.
     On the log file called BusinessObjects.12.1.log at same path the error "Return code from cmslogon.jar: 1" can be found many times showing that the system tried to start the CMS many times unsuccessfully
The SAP Note 1390781 is not working. Does anybody solve the issue?
thanks
Javier

Windows 7 Production Premium CS4 language pack installation error + solution

Ok. Long story short...(For solution scroll all the way down)
Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
...BUT
Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
Ok. So...Questions shortly:
How to get my Production Premium installation work in Windows 7 and get back to work?
How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
EDIT:
Well...This is what I got from the error report:
Adobe After Effects CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Encore CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Flash CS4 Extension - Flash Lite LangPack Common
Error:
Error 2.
Adobe Flash CS4 Payload LangPack (en_GB)
Error:
Error 2.
Adobe Illustrator CS4 LangPack (en_GB)
Error:
Error 2.
Adobe OnLocation CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack_x64
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Soundbooth CS4 LangPack (en_GB)
Error:
Error 2.
LangPack (British) for DeviceCentral
Error:
Error 2.
Tried installing different language but it still won´t work...
Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
Any ideas anyone?
EDIT:
Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
EDIT:
SOLUTION...
Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
Hope this tip is helpful!
Now...Back to work!

WOH, just what I needed.
My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen!

"Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support

Installation Error: Cannot Install Photoshop

I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4
Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. How do I fix that? I'm just trying to install the trial...

Okay I got it to install but I am getting this message about not having having VersionCue.DLL installed. I don't have it in the directory it's specifying, but I can't seem to find it online either. If can run my adobe programs just fine, but when I try to go to like my ITunes or My Downloads, it gives me this message.
Any ideas how I can fix it? I really don't want to uninstall everything. I have already done that so many times. I read an article written by Adobe that said essentially they don't know what the crap is goin on. Which I found real reassuring.

BOXI R2 sp2 installation error

Similar Messages

Maybe you are looking for