BOXI R2 with MS SQL 2008

Hi All,
Pls let me know , if Business Objects XI R2 can be Installed with MS SQL 2008.
If it's not possbile, kindly advice what work-around we can do in-order to install BO XIR2
with MS SQL 2008.
I have searched a lot in this forum, but unable to see clear answer.
Regards,
Manoj N.

Hi Manoj,
Two things:
1. XIr2 is no longer supported by SAP, so I would not advise you to install this product. Instead use a supported product to give you the possibility of SAP engineer support and development support.
2. XIr2 was never tested and therefore supported for use with SQL Server 2008, in terms of the CMS\Audit database.
Having said that, XIr2 may work with SQL Server2008 but you would have to test and may get issues at any time - I would not advise this.
<<Text removed>>
Kind regards,
John
Edited by: Matt on Oct 10, 2011 10:17 AM

Similar Messages

Data Services 4.0 installation with MS SQL 2008

hey guys,
I am trying to install data services 4.0 on a windows server with MS SQL database as the repository database. So, my plan was to install MS SQL 2008 first, then IPS, then data services. But i am facing a problem in installation of MS SQL itself. I installed MS SQL with following features - database engine, client tools and management tools. The installation process was smooth and the sql server services (server and agent) both startup just fine. I installed a custom instance for the same.
But problem is when I open the management studio and try to connect to the database engine, it does not connect, I choose database engine as the server type, local hostname as the server name and windows authentication as the authentican type but it fails with the following error:
TITLE: Connect to Server
Cannot connect to <myservername>.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
BUTTONS:
OK
Any clues as to what is causing this ??? Or is it normal at this stage of installation ?? I am confused. I have already tried to reinstall the server, no good, nothing in the event logs either.
Thanks,
RS

resolved via following:
In the TCP/IP Properties dialog box, on the IP Addresses tab, several IP addresses appear in the format IP1, IP2, up to IPAll. One of these is for the IP address of the loopback adapter, 127.0.0.1. Additional IP addresses appear for each IP Address on the computer. Right-click each address, and then click Properties to identify the IP address that you want to configure.
If the TCP Dynamic Ports dialog box contains 0, indicating the Database Engine is listening on dynamic ports, delete the 0.u201D
Once I deleted those zeros and put in 1433 for TCP ports on each IP address, voila!

Problems install SCCM 2012 with remote sql 2008 r2 sp2

I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
I get the error "The network path was not found"
if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
I cannot seem to verify is the ssb port is working correctly or not.
my account is local admin on both servers and a sql sysadm.
There is no firewall between servers.
Any suggestions?
Regards
Don

SPN is setup to AUTO register and is working. remote sql is not a cluster. Windows firewall on both servers is disabled. Sql browser is enabled and started. we have a group for system center that contains site servers and this group
is in the local admin of both servers and sysadm inside of sql server.
Why we are consolidating all or our lesser sql servers into a larger one.
Snipt of the log.
12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.
Server stack trace:
at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.

Ms SCM has compatibility issue with MS SQL 2008 & 2008 R2

Hi,
I'm trying to install Ms Security Compliance Manager in Windows 8.1 (64-bit machine). During the installation, it gives me the following error message:
This program has compatibility issues
Microsoft SQL Server (2008 & 2008 R2)
Could anyone help me to solve this issue?
Kind regards,
Mohamed Maricar

Hi,
Please refer to the known issues part in the article below:
Microsoft Security Compliance Manager (SCM) - Release Notes
This is a known issue that causes this message to display after installing Microsoft SQL Server 2008 R2 on a computer running either Windows 8 or Windows Server 2012. The workaround to resolve this issue is to click the Run the program without getting
help option on the warning message and then proceed with the SCM 3.0 installation. SCM 3.0 will install on the computer without any impact from the warning message.
Besides, regarding SCM related issue, we'd better seek help in the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=compliancemanagement
Best regards
Michael Shao
TechNet Community Support

Lync standard 2013 deployment with standard SQL 2008/2012

Hi
I have been looking into the requirements and of setup Lync 2013 and I'm getting a little confused at to what would be required for SQL databases and what servers they need to be located on.
we have two sites siteA and siteB and a fast link between them 1g
I want to have two FE lync servers at site A in a pool
I want to have two FE Lync servers at site B in a pool
want to have the DR capabilities that have been mentioned in pool pairing as well can this be done with standard only
Do I require SQL for these Front end servers? or do I just need two BE servers at each location each with SQL standard installed?
To start with we really only want to use lync for IM and Presence but will require access from Iphones will this require a edge server in the DMZ? or could you use TMG?
what other roles will be required if we need to look at conversation that occurred in IM for auditing purposes.
I have looked on Technet and it only really refers to using SQL express for standard, which to me historically is something I have not done since it has been looked upon as free and therefore maybe not seen as an medium enterprise solution.
thanks in advanced
J

If you're using Standard edition servers, meaning you'd have 1 server per pool and you'd pair between the sites, no SQL licensing is required unless you want it for monitoring or persistent chat databases.
If you want to have multiple servers in a pool for high availability (you mentioned 2 per pool, you want a minimum of 3 per pool), you'll need a Lync Enterprise pool with a full SQL backend.
You can pool pair with both Standard and Enterprise.
You don't require SQL for the front ends in either scenario, as SQL Express will be installed. For the Enterprise edition pool you'll need at least one SQL Standard instance, but a second for high availability using mirroring would be nice. You'll
want a third SQL server acting as a witness to allow for automatic failover within the mirror, but this can be SQL express and doesn't require a license.
For access from an iPhone, using the Lync mobility client, you'll need an edge for A/V traffic and a TMG or other reverse proxy such as IIS ARR or WAP to publish the web services on the front end pool to the Internet.
Since this is Lync 2013, you don't need an additional role for auditing, auditing can be collocated on the front end server and write to the same SQL instance you're using for the front end pool. You could also choose to keep the data in Exchange if
you're running at least Exchange 2013.
SQL express is the only thing you can use for Lync standard back end, but this isn't awful. It does the job for Lync. If you prefer a full SQL instance, then Enterprise is the way to go, and if you want HA with multiple servers in a pool, this
is your only option. Lync will install SQL Express on each server regardless for local copies of the management store databases and presence information, but the primary copies will be in the full SQL back end instances.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Need help with Kerb. jdbc from Linux to MS SQL 2008

Hello Forum, I am getting an erro when I try to use Kerb. trusted security to connect to sql server.
4.0 documentation reflects it's absolutely possible.
Not only that, I have ms odbc installed on the same box and it provides Kerbers (not ntlm) connection to sql server. But java with jdbc reject doing it.
Here is the message:
com.microsoft.sqlserver.jdbc.SQLServerException: Integrated authentication failed. ClientConnectionId:5836ac6c-6d2e-42e4-8c6d-8b89bc0be5c9
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(SQLServerConnection.java:1667)
        at com.microsoft.sqlserver.jdbc.KerbAuthentication.intAuthInit(KerbAuthentication.java:140)
        at com.microsoft.sqlserver.jdbc.KerbAuthentication.GenerateClientContext(KerbAuthentication.java:268)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(SQLServerConnection.java:2691)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(SQLServerConnection.java:2234)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(SQLServerConnection.java:41)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(SQLServerConnection.java:2220)
        at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:5696)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1715)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1326)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:991)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:827)
        at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:1012)
        at java.sql.DriverManager.getConnection(DriverManager.java:419)
        at java.sql.DriverManager.getConnection(DriverManager.java:367)
        at connectURL.main(connectURL.java:53)
Caused by: javax.security.auth.login.LoginException: unable to find LoginModule class: com.sun.security.auth.module.Krb5LoginModule
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:834)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:209)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:709)
        at java.security.AccessController.doPrivileged(AccessController.java:327)
        at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:706)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:603)
        at com.microsoft.sqlserver.jdbc.KerbAuthentication.intAuthInit(KerbAuthentication.java:133)
1] Client side:
Which OS platform are you running on? (Linux)
Which JVM are you running on? (IBM J9 VM (build 2.6, JRE 1.6.0 Linux amd64-64
What is the connection URL in you app? (jdbc:sqlserver://abcde24243.somebank.COM:15001;databaseName=master;integratedSecurity=true;authenticationScheme=JavaKerberos)
If client fails to connect, what is the client error messages? (see above)
Is the client remote or local to the SQL server machine? [Remote | Local]
Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup)
[2] Server side:
What is the MS SQL version? [ SQL Sever 2008]
Does the server start successfully? [YES ] If not what is the error messages in the SQL server ERRORLOG?
If SQL Server is a named instance, is the SQL browser enabled? [NO]
What is the account that the SQL Server is running under?[Domain Account]
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES ]
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ]
I currently can login from client using ms odbc sqlcmd (linux) version with trusted Kerberos connection.
which tells me there is no problem with firewall.
Tips:
If you are executing a complex statement query or stored procedure, please use execute() instead of executeQuery().
If you are using JDBC transactions, do not mix them with T-SQL transactions.
Last but not least:
gene

Saeed,
Not being versed in JAVA, I'm not sure what you're telling me. Can you tell me if this looks good? BTW, I did find out that JDBC is installed on the server as part of Coldfusion and this is what I was told:
macromedia.jdbc.oracle.OracleDriver is 3.50
macromedia.jdbc.db2.DB2Driver is 3.50
macromedia.jdbc.informix.InformixDriver is 3.50
macromedia.jdbc.sequelink.SequeLinkDriver is 5.4
macromedia.jdbc.sqlserver.SQLServerDriver is 3.50
macromedia.jdbc.sybase.SybaseDriver is 3.50
Below is what I think will work, but I know it won't because of the semi colons. Can you help me fix it?
I've the things that I think need changing are in bold.
Thanks!
======
private void dbInit()
dbUrl = "jdbc:odbc:DRIVER={SQL Server};Database="DATADEV";Server=VS032.INTERNAL.COM:3533;", "web_user";
try
Class.forName("macromedia.jdbc.sqlserver.SQLServerDriver ");
catch(Exception eDriver)
failedDialog("Driver failed!", eDriver.getMessage());
private void dbOpen()
if(paramServerIP.indexOf("datadev") >= 0)
dbPswd = "password";
else
dbPswd = "password";
try
dbCon = DriverManager.getConnection(dbUrl, paramDbUserStr,
dbPswd);
dbStmt = dbCon.createStatement();
dbStmt.setEscapeProcessing(true);
catch(Exception eDbOpen)
failedDialog("Failed to open db connection!",
eDbOpen.getMessage());
private void dbClose()
try
dbStmt.close();
dbCon.close();
catch(Exception eDbClose)
failedDialog("Failed to close db connection!",
eDbClose.getMessage());
}

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Sharepoint 2010 SQl 2008 r2 Reporting Services Integrated with Claims

i have a 4 server sharepoint 2010 farm all servers are windows 2008 r2 x64
two severs are sharepoint app/wfe servers
one server is SQL sharepoint content db server sql 2008 r2 enterprise
one server is SQL Claims Provider DB and reporting services on SQL 2008 r2
the site is behind a forefront tmg proxy firewall for both internal and external users and both locations are producing the same results.
the web application i am having an issue with consists of a primary web app claims enabled web app that only has NTLM enabled, with an extended extranet webapp that supports claims and NTLM.
there is surrently a site collection that has been configured for reporting services when i log into the site as a SQL Claims user i am able to run the reportbuilder as a content type using the New Report builder report content type from a library on
this site. Reportbuilder launches and i am once gain prompted to login i login with the same credentials i used to log into the site and reportbuilder opens up and then i am able to open datasourceas and reports.
When i log in to the same site collection as a domain user i am able to log in to the site and launch reportbuilder. When reportbuilder opens up i am prompted to log in, i insert my domain\username and password and nothing happens the login prompt appears again
blank on the back end it throws the following exceptions
1. Password check on 'username' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException:
The security token username and password could not be validated.).'.
2.An exception occurred when trying to issue security token: The security token username and password could not be validated.
any thoughts on where i should begin troubleshooting this.

I think i am getting close i am now seeing a new error it seems that the sp farm account is unable my domain account when launching reportbuilder.
vent code: 4006
Event message: Membership credential verification failed.
Event time: 4/6/2014 10:59:05 AM
Event time (UTC): 4/6/2014 2:59:05 PM
Event ID: 7640af98dab846829f78e7d74a4e1e8a
Event sequence: 9
Event occurrence: 8
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/SecurityTokenServiceApplication-1-130412687342754349
    Trust level: Full
    Application Virtual Path: /SecurityTokenServiceApplication
    Application Path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\SecurityToken\
    Machine name: (SP WFE MACHINE NAME)
Process information:
    Process ID: 8044
    Process name: w3wp.exe
    Account name: (SP FARM ACCOUNT)
Request information:
    Request URL:
    Request path:
    User host address:
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: (SP FARM ACCOUNT)
Name to authenticate: (doamin account launching reportbuilder)
Custom event details:

Error in sql 2008 reporting services with sharepoint 2013

i have database sql 2008r2 and sharepoint 2013 enterprise
database is in cluster server and sharepoint have 2 servers one for webfront end and one for services.
im tring to configer ssrs in the web front end server for sharepoint and i install sql 2008 add on for sharepoint 2010 but still have this error
The configuration parameter SharePointIntegrated is set to True but Share
Point Object Model cannot be loaded. The error was:
System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot
find the file specified. File name: 'Microsoft.SharePoint, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' at
Microsoft.ReportingServices.SharePoint.Objects.RSSPImpSecurity.set_StaticCatchAccessDeniedException(Boolean
value) at
Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper..ctor() at
Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelperFactory.get_ServiceHelper()
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure
logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]
(DWORD) to 1. Note: There is some performance penalty associated with assembly
bind failure logging. To turn this feature off, remove the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog]. .
(rsSharePointObjectModelNotInstalled)
and befour that i was install sql 2012 add on for sharepoint 2013 but was the same error so i did uninstall for it
this error when i try to open reporting services url
Thanks for any help :) my blog is: http://www.waelk.com

SharePoint 2013 only supports SSRS 2012 SP1 - http://msdn.microsoft.com/en-us/library/gg492257.aspx. You'll need to upgrade your SSRS instance to 2012 SP1.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Update SharePoint list programatically twice a day with SQL 2008 r2

How complicate is to sustain the update SharePoint list programatically twice a day by using SQL job?
the data need to be update twice a day and it is going o be use to feed a share point form...where the user(S) will be choosing by lookup in infopath form.
BTW..I do not have control of the SharePoint farm, I have MS SQL 2008 R2 and SharePoint version is 2010.
Or Also I am considering to use MS access 2010 and SharePoint version is 2010.
CRISTINA&amp MICROSOFT Forum

>DRAFT IDEA<
Is this will corrupt SharePoint if I try this?
The two data list that I want to update twice a day come from other database sources
One is from Human Resources roster list. (The result of the query) –amount of records >> 600
UNREAL
example
Unique ID
domain name
Region
Badge
Full Name
email address
Manager
Director
EUROPE
EMEA
123456
Bear, Charles
[email protected]
Hanc, Juilan
Cano, Oscar
AMERICAS
ABU
223456
Ros, Adrian
[email protected]
Knight, Dexter
Brown, Dexter
ASIA-PACIFIC
APJ
323456
Chen, Andy
[email protected]
Ducann, Scott
Ginger, Jeff
(JOIN) From the roster list connect with the User Information List "user
credential"(/_vti_bin/UserProfileService.asmx) to allow me Create dependent drop-down by using these articles:
https://claytoncobb.wordpress.com/2009/06/21/userprofileservice-extended/
http://sharepoint911.com/blogs/laura/Lists/Posts/Post.aspx?ID=172
http://blogs.msdn.com/b/infopath/archive/2004/03/24/95529.aspx
http://www.dotnetcurry.com/showarticle.aspx?ID=794
http://www.codeproject.com/Articles/155829/SQL-Server-Integration-Services-SSIS-Part-Basics
The second one comes from Account list. (The result of the query) –amount of records >> 22,000
FAKE
example
Unique ID
email_address
account_id
account_lk_id
account_name
subdivision_region_name
subdivision
support_model
[email protected]
22650
22649
NANA Web Skills
AP
Martial Law
PunkingSPlus
[email protected]
16624
16624
ELECTRIC FOOD
AMER
Short Circuit Blue
PunkingSPlus
[email protected]
12538
12538
100 Got drunk
EMEA
100 Got drunk
PunkingSPlus
[email protected]
22206
22205
911 Hospital Ghost
AP
Hospital AP
PunkingSPlus
[email protected]
6886
6886
Administration for UFO LAND
AP
Xiamen
PunkingSPlus
[email protected]
22242
22241
ACT Recording
EMEA
ACT Recording Orange
PunkingSPlus
(JOIN) In this list I will need to do the same connect with the User Information List "user
credential"(/_vti_bin/UserProfileService.asmx)
To narrow these lists to what they are only responsible to work..
These two tables are going to be part of InfoPath form ...
with these draft idea , Do I need to be considering to be using what you suggest ? >>>"PowerShell
availabe in SQL and the CSOM to interact with SharePoint "
Could be possible that you can also provide an article?? relate to ....
"Firstly you must not update SharePoint content databases directly from SQL. Doing so may
corrupt your farm and will render it unsupported by Microsoft."
Thanks in advance
CRISTINA

SQL 2012 database behaves differently with a unique index and ignore_dup_key = on when inserting data. It works on SQL 2008 db

If you have a table with a unique index and ignore_dup_key = on and you INSERT rows into that table with an ORDER BY clause (because you want to control which of the duplicate
key rows gets inserted), the wrong row gets inserted in SQL2012. It works correctly in SQL 2008.
We have recently migrated a database from SQL 2008 to SQL 2012. We do have few other dbs which are in compatability mode 100. The above operation works fine
in SQL 2008 dbs but not SQL 2012.
I've even tried applying the latest patch for SQL 2012 SP2 with CU2. Still the problem exists. I'm going to call MS support, but want to know if anyone has come across this problem ?

The MS documentation doesn't guarantee that the first row of the duplicates will always be inserted and the next duplicate row(s) get(s) ignored. Where did you find it in the MS documentation? I think you were just lucky that it was always inserting the
first row in SQL 2008 (and ignoring the rest of the duplicates) - I don't think this is guaranteed
Satish Kartan http://www.sqlfood.com/

Migrate SQL 2008 Analysis database to 2012 AS database along with data level security defined in current production cube

I want to migrate Analysis Services 2008 database to 2012 AS database along with data level security defined in current production cube
Note: Only Production environment have security, while no security is defined in development environment
Potential Approach:
1 - Using Synchronization Wizard: Gives me error : "The OLAP element at line1 can not appear under envelope......" and this is because Synchrinzation works only for same version
and in my case, there are different versions of SQL (SQL 2008 and 2012)
2 - Using Visual studio conversion wizard - Convert SQL 2008 AS project to 2012 and then process cube, so I can get the cube working but then how can I get data level security since 100's of data level security is defined in production Cube, so how can I
migrate that across
3 - Script out XMLA and deploy cube - But then again having issues with how can i script SSAS security
4 - Would taking backup of SSAS 2008 database and restore to SSAS 2012 will help ?
Any suggestions would be appreciated
Thanks,
Mihir

Hi Mihir,
According to your description, you want to migrate the SQL Server Analysis Services (SSAS) 2008 database which have some security setting with it to SSAS 2012, right? We can migrate existing Analysis Services databases either during Setup, by upgrading an
existing instance of Analysis Services, or after Setup, by running the Migration Wizard. Generally, when migrating a database to another server, all the setting will be migrated. So in your scenario, you can refer to the steps on the links below to migrate
your SSAS database.
How to: Migrate Analysis Services Databases
Migrating Existing Analysis Services Databases
Regards,
Charlie Liao
TechNet Community Support

Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!

Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL 2008 R2 Backups (Backup Exec) are failing with SQLVDI error

Hi
We are experiancing Backup failures with SQL 2008 R2 DB with Backup Exec 2012, below are the errors
Event ID 18210: BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'MSQ_00__2efc94bd_289f_4866_8dcb_3f3fde91416d_'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
Event ID 1: SQLVDI: Loc=TriggerAbort. Desc=invoked. ErrorCode=(0). Process=1864. Thread=6220. Server. Instance=MSSQLSERVER. VD=Global\ECD_00__2efc94bd_289f_4866_8dcb_3f3fde91416d__SQLVDIMemoryName_0.
We upgraded the memory from 8 GB to 12 GB, also as per the kb article we registered sqlvdi.dll with the servers, but still have teh same issue
Expect support to correct teh issue
LMS

Hi，
I’m writing to follow up with you on this post. Was the problem resolved after performing our action plan steps?If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

BOXI R2 with MS SQL 2008

Similar Messages

Maybe you are looking for