[BOXI3.0]Save to my computer a CSV

Having refreshed a DeskI report in InfoView there are 3 options on the "Document - Save to my computer as" menu. They are Excel, PDF and CSV. The first two export the report tabs as displayed on screen. However the CSV option seems to export the data providers rather than the report tabs.
There is also a "Save Report to my computer as" menu and that just has options for Excel and PDF
This CSV option is very dangerous as all sorts of filtering and merging may have been done on the report tabs or even hiding confidential data.
There are rights options for WebI documents to "Save as PDF", "Save as excel" and "Save as CSV" as well as "Export the report's data". But DeskI documents don't get these extra options they just get the  "Export the report's data" option.
Is there any way to deny the "Save to my computer as CSV" for DeskI documents?
or
Is there any way to deny the "Save to my computer" while still allowing "Save Report to my computer"?
thanks
Andrew

Jayalakshmi,
Did you recently changed any security settings in the Portal or updated the Portal?
With kind regards,
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Similar Messages

  • I keep getting the box that asks "Do you use the Yahoo! Toolbar on multiple Computers. It asks Save to my Yahoo! ID, or No thanks, just save to this computer. How do I get rid of this one way or the other?

    When I log on to Firefox, I get this block that pops up saying, "Do you use the Yahoo! Toolbar on multiple computers? It has 2 buttons asking "Save to my Yahoo! ID or No thanks, just save to this computer" It drops down from the Yahoo toolbar, next to the Y! on the left side of the tool bar. I have tried the Save button and no response, I tried the No thanks button no response. I tried the underlined "Learn more" and it too no response. I tried the close X but that does not get rid of this box. I tried right clicking and no response. It stays there through out while working on the mail, I cannot access the that toolbar so I cannot use the buttons on this tool bar. Please help or I will have to try another browser to see if it go away.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

    I have mac pro and firefox 3.0.19
    I am trying to download a video from youtube.?
    I can see the video. I want to download it and save in my computer to see it again.
    I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
    When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
    == This happened ==
    Every time Firefox opened
    == I want to download a video from youtube

    No, this reply is not helpful. It simply generates this little gem:
    "This service requires the conversion feature to be enabled.
    Configure conversion ?"
    And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

  • How can you retrieve information from a iCloud backup on a previous iPhone? Backup from old phone is taking up a lot of space, would like to save pics to computer before deleting. How can I open up the backup from previous phone that is now on the iCloud?

    I originally had an iPhone 4 but switched service carriers back in June.  When I bought the new iPhone 4s, all my information from the iPhone 4 was saved as a backup on the iCloud.  On my new phone in the iCloud settings, Storage & Backup, it shows the backup from the iPhone 4.  This backup is taking up a lot of space on my phone and I would like to delete to avoid having to purchase more space.  However, I know I have pictures on this backup from the iPhone 4 that I would like to view and save on my computer if at all possible before deleting.  Is it possible to view the photos from this backup? If so, how? Thank you in advance for any assistance.  I hope this makes sense, lol, I'm not very computer literate.

    Unfortunately with the issues I mentioned above I don't even think I have enough space for that on the computer!  I have literally moved all moy pictures, music, etc. to another drive and all that's left are some small docs and applications.  I don't know how to find any more space on the thing and can't get things updated until I fix this...

  • After installing Snow Leopard I can no longer "save photos on computer" after inserting a memory stick to an HP Photosmart C5180 All in 1                                                                                           Photosmart C5180 All in one

    Hello,
    When I insert a memory stick into my HP Photosmart C5180 All in one and I try to "save photos on computer" the printer reads: "You need to install device software". This all started happening after I installed Snow Leopard on my Mac 10.6.8. Can someone please advise on what I need to do?

    Typically it's a good idea to uninstall any devices attached to the Mac before doing an upgrade.  This prevents problems that can be caused by the upgrade.  Below are the instructions for uinstalling and reinstalling the printer.  I'm also going to include a link to the full feature software and drivers for the printer.  Let me know what happens.
    Uninstalling the Printer Software
    Installing the Printer Software in Mac OS X v10.6 Snow Leopard for a USB Connection
    HP Photosmart Full Feature Software and Drivers - Mac OS X v10.6
    I am a printer tech for HP.

  • My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

    My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

    11lizzyp wrote:
    can't be saved because the file is read-only.
    I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
    More on versions here:
    http://support.apple.com/kb/ht4753
    local snapshots:
    http://support.apple.com/kb/HT4878
    Sounds like a permissions problem ie read only.
    If running repair permissions from your DiskUtility.app does not sort it,
    Someone should jump in here with erudite and concise fix.

  • WebI - Save to my Computer and Print doesn't work - screen flashes quickly

    I have some very basic questions about WebIntelligence. I can't believe that I am stumbling
    on something simple - here it is:
    1. I created a report and want to save it on my computer - I click Save to my Computer and
    select the "As Excel" option. It just flashes - if I choose the PDF option its the same. What
    could be wrong?
    2. I want to print my report. I create a report, hit the print button, comes up with the
    Make Printable Version and I click OK again it flashes and doesn't want to print.
    I have Adobe Reader 9 installed.
    Any clues what I may be missing?
    Thanks very much!
    Lynn Fernando

    Hi Lynn,
    Acrobat reader version 9.0 is not tested with BOXIR2 might be because of thid you are getting this issue.
    With BO XIR2 SP3 and SP4 below Acrobat Reader vrsions are supported
    Reader
    u2022 Acrobat Reader 5.0
    u2022 Acrobat Reader 7.0
    WithBO XIR 3.1
    Reader
    u2022
    Acrobat Reader 7.x
    u2022
    Acrobat Reader 8.1.2
    u2022
    Acrobat Reader 9.0 are supported.
    1] Either you downgrade your Acrobat Reader version from 9.0 to 7.0 if you want to be on BO XIR2.
    2] Or of you can upgrade your BO version to BO 3.1
    after implementing either of one you will be able to print the reoprts.
    Hope this helps.
    Regards,
    Deepti Bajpai

  • How to save an excel file as CSV with semi-colon as data separator?

    We are creating a flat data file to load the flat file data to our BW system with Excel.  When we save the file, there are three kinds of CSV types for selecting from the "Save as type" list box:
    CSV (Comma delimited)
    CSV (Macintosh)
    CSV (MS-DOS)
    There is no CSV (semi colon delimited) type.  If we pick CSV (Comma delimted) as the type, then when clicking the "Preview ..." picture icon under the "DataSource/Trans. Structure" tab of the InfoSource for this flat file (with the CSV radio button checked the Data separator default is ";"), the File Upload Preview window shows the data is messed up that some columns of the excel flat file are combined into one column.
    Since the save type we picked is "CSV (Comma delimited)", then we try to change the default Data separator from ";" to "," in the preview selection screen, but still not helpful!
    How to resolve the above problem?
    Thanks

    Hi Kevin,
    This "," is defined in your windows setting. If you want to have ";" as separator then go to control Panel, select Regional Options, go to Numbers Tab and define the List separator as ";". After that when you will save your excel file as CSV(MS-DOS) it will have ";" as separator. This will make sure that the amounts are not broken in to two different fields while loading.
    Else if you keep "," as separator then you can also go into the Excel and define all number fields as Number without thousand separator.
    Let me know if you have any doubts in this.
    Regards,
    Rohit

  • I was able to open a pdf document but was unable to save to my computer.  I have adobe acrobat pro x

    I was able to open a pdf document but was unable to save to my computer.  I have adobe acrobat pro xi.  the message i received was.  "the document could not be saved.  there was a problem reading the document (8)."
    I was able to convert it to a Word document  and then save, but I should not have to do that.

    Did you try a Save As? What OS? Have you updated Acrobat?
    Another alternative is to print to a new PDF. That is probably a better work flow than going to WORD and back.

  • How do I save a string to a CSV file using applescript?

    Hi,
    I have an applescript that returns a string in the form:
    Value1,Value2,Value3,Value4
    Value5,Value6,Value7,Value8
    Value9,Value10,Value11,Value12
    Value13,Value14,Value15,Value16   etc.
    I would like to be able to save this string as a CSV file on my desktop but I'm not sure how to do this.
    Could someone help me out with this?
    Thanks,
    Nick

    sorry, I didn't read carefully.  this is slightly better:
    set theText to "some delimited text you already have..."
    set filePath to (path to desktop as text) & "file name.csv"
    set fp to open for access filePath with write permission
    write theText to fp
    close access fp

  • Cannot log in back after screen saver locked the computer

    Hi there,
    We have a domain environment with Windows 2012 R2 and a Windows 2003 domain controllers and Windows XP and Windows 7 clients. We have setup a GPO for screen saver which lock the computer after 15 minutes idle. In the last few weeks on some Windows 7 computers
    after the screen saver locked the computer the users cannot log in back. Error message come up with Username or password is incorrect. 
    I've tried to reach the computer through RDP but same error came up even tried to log in as domain admin. I could log in as domain admin locally (switch user option) but as a user cannot. I've tried to restart Netlogon, Workstation and Server services but
    nothing happened. In the event viewer no related error message. The only way to login back as a user to restart the computer. It is not really good solution as they opened lots of things which wasn't saved.
    Anyone has any idea or experience to solve this issue?
    Many thanks
    AM

    I could log in as domain admin locally (switch user option) but as a user cannot. I've tried to restart Netlogon, Workstation and Server services but nothing happened. In the event viewer no related error message. The only way to login back as a user
    to restart the computer. It is not really good solution as they opened lots of things which wasn't saved.
    Hi,
    Since you could login with Domain Admin locally, it should didn't have problem with Netlogon service and other logon correspond service. It seems like the account itself problem.
    When this problem occures, have you tried to use other computer logon with the problematic account for test? If other normal computer also had same problem when using the account. It's should your Server authenticate problem. If not, it maybe the domain
    account profile problem, you can try to remove the account and readded it for test.
    If there was any updates, please feel free let us know.
    Roger Lu
    TechNet Community Support

  • I cannot access iPhoto now I have upgraded to Yosemite. Not available in UK! What can I do? I have hundreds of photos I need access to and more to save on my computer.

    I cannot access iPhoto now I have upgraded to Yosemite. Not available in UK! What can I do? I have hundreds of photos I need access to and more to save on my computer.

    iPhoto should be still in your Applications folder and will still work. But if you failed to keep it up to date then Try Terence's instructions here  Is Iphoto gone ?i want it back!
    Pete

  • My Video won't save all the way when i save to my computer..and more problems??

    When i go to share and then save to my computer the video saves half way and then stops...and ive saved other videos and it has worked.... and when i open my video a box pops up saying that that adobe premiere has low memory..... is there something wrong with my clips or audio or titles or pictures or something that its doing this?? my videos are mp4 and audio is mp3 and pictures are jpgs???

    It could be a number of issues, Fred.
    Have you optimized your photos to no larger than 1000x750 pixels, per the FAQs to the right of this forum? Oversized photos are the chief reason for these types of failures.
    http://forums.adobe.com/thread/431851?tstart=0
    You also say your videos are MP4s. Are these AVCHD video or are they from a "webbie" camcorder, such as the Flip cam? Flip video uses a proprietary codec that often jams up video editors. This is also covered in our FAQs.
    http://forums.adobe.com/thread/437535?tstart=0
    Finally, have you ensured that the drive you are saving your video to has adequate free space and is freshly defragmented? You should always have at least 30 gigs of free space on your drive plus 30-50 more for each hour of video you're outputting.
    And, if you are exporting to a drive other than your C drive, you should ensure that the drive is formatted NTFS rather than FAT32. FAT32 drives have a file size limit that often chokes video output.

  • I dont know why my iphone 4 back up will not save to my computer

    I do not knnow why my iphone 4 will not save a back up to my computer...I am now running windows 8

    it runs through the whole back up...then at the end says it cannot save to my computer.  I have also went in to authorize my computer....and it says my computer is already authorized...I have tried this several times in the last couple of weeks....and a number of other things...but it still does not work for me.... Also...my phot app on my iphone... is stuck in the restoring mode.....it has a windmill running at the bottom of the screen and it says......RESTORING
    this has been going on for the last couple of weeks too.....all around the same time I was trying to backup my device and save it to my computer.....
    I am very frustrated.

  • My Video won't save to Personal Computer when i go to share

    When i got to share and there is the option to save to personal computer or upload to youtube or save to dvd, i push save to personal computer and then save as mpeg and then go to save and then a box pops up saying that adobe premiere has stoped working..... and then it closes out

    You might want to give the full specs of your computer, your Project and the Assets used in that Project. More details will be better.
    If the program is crashing, or hanging, then this ARTICLE might give you some clues as to why. With those clues, someone can likely help you find the cure.
    Good luck, and please post back with the details,
    Hunt

Maybe you are looking for