BOXI4 SP2 P12 - No Business Layer Sent Back From Server

Hi All,
Have created a new multi-source universe using the Information Design Tool.
Published the Business Layer to the repository successfully.
When trying to create reports with the universe I now get an error - "No Business Layer Sent Back From Server".
Have checked CMC permissions to the Universe which are fine and the Connection permissions which are also fine?
What else could be causing this error?
Thanks,
Gary

Hi Gary,
If the issue occurs only on Webi Rich client and not on webi from Infoview, then check the note 1620509.
https://service.sap.com/sap/support/notes/1620509
Check also your BI4 version. If you are using a version below Patch 2.5, then it might be interesting to update your environment as some people experienced this error message on previous versions and not after updating. cf note 1622652.
https://service.sap.com/sap/support/notes/1622652
I hope this will help you
Regards,
Philippe

Similar Messages

No business layer sent back from server in Rich Client

Hi,
Whenever user tries to open a universe from Rich Client, he gets this error while webi works fine for him. What could be the issue?
Hi Rich Client version is SAP 4.0.6.02 same as mine and mine is working fine.
Only this particular user is affected. What could be the issue?
Thanks for your time.

There are several cases for this issue to occur, as per your discussion it appears to be a user/machine specific issue
If the issue is machine specific:
Cause: SAP Business Objects BI Platform client tools was unable to make changes in the Windows Operating system registry due to insufficient access rights of a Windows user who used to perform the installation
Resolution:
Log on to the host with SAP BusinessObjects BI Platform SP04 Client tools as Windows Administrator (or a member of Administrators group)
Launch Web Intelligence Rich Client application
This will make entries in windows registry, further you will not get the error
It the issue is user specific: That is this user will get the specified error across all client machines for the give scenario
Cause:
Insufficient rights to the user/group on Universe Connection
Resolution:
Login to Central Management Console (CMC) using Enterprise Administrator.
Navigate to Connections.
Grant User/Group 'View on Demand' Access level to the Connection on which the Universe is to be created.
Login to the BI Launchpad with the user and create New Webi report.

Cookies not sent back to server

Server sends 'sessionid' as cookie, and Mozila works fine, cookie is returned back.
Due problem of multiple services (sites) on same web server I've decided to rename 'sessionid' cookie name to 'vdssessionid'. Now FireFox simply ignores this cookies nothing is sent back, even if I see in Web Console that this cookie is originaly sent to FireFox, nothing is returned back.
in other browsers this works fine.
FF version 22.0 (updated today)

>>> even if I see in Web Console that this cookie is originaly sent to FireFox, nothing is returned back.
"Web Console" has integrated network (HTTP) analyzer with all headers.
Why would I download another addon for firefox when I have one that works, or it doesn't!?
My appologies forgot to mention this is Ajax (HTTPXMLRequest) that was communicating with server. And in response to Ajax request server responded with this cookie. Also in response as content was relative redirection URI that is set with top.location = ajax.response;
Maybe something in this mechanism confuses FireFox, but I highly doubth. As same mechanism works just fine when cookie name is 'sessionid'.

Getting old 'Sent" messages from server onto my Mac

I am using Mail 2.1.3 on a Mac Mini with OSX 10.4.11.
I have used web mail (earthlink) exclusively for a number of years and now want to switch to a new email provider. I would also like to start using Apple Mail. I need to preserve my old send messages as well as my old inbox messages.
In doing some testing, I can get old inbox messages to come down from the server into Mail on the Mac. However I have no idea how to get the old 'Sent" messages down. Can't find anything about it in Help or elsewhere.
I'm logging into server mail via POP.
Can anyone help put me on the right path? Thanks.

Never mind, I figured it out for myself.
I contacted earthlink and they were useless, as usual. They do not support IMAP and they insisted it was "impossible" to export messages from the sent box or archive them in any way. When I pushed back on that, they told me one way would be to go into each message and forward it to myself (thus having it appear in my inbox.) With thousands of messages, that was not going to happen.
So I poked around and realized that right on the menu is an option to move messages from one box to another. I mass selected all the messages in my sent box and moved them to my inbox, and they all came down to my Mac. Easy as could be.
The messages are now co-mingled all in the inbox, (but still in order by date) but that's okay, because I just need to archive them.
FYI for anyone else having this problem, I am switching to gmail, and I also found out that gmail has an option for pulling all your old messages into their mail service, with many common email providers supported. Whether this pulls in the sent messages or just the inbox, I don't know. But gmail supports IMAP, so if you can get them over there, you should then be able to get them down to your Mac/PC. So that could be another option.

Error 61 when sending data from client and back from server.vi

Trying to generate and send a data from client.vi and adding the numbers generated and sending it back to the client .In client the data is received only once and an error 61 occurs .How do I get rid of this error?I have attached the two files for reference
Attachments:
Sguruserver.vi ‏63 KB
client1.vi ‏100 KB

You can certainly use and application started by WebStart to send data to a server.
However, the Sandbox restrictions allow you to contact the server the application was loaded from without asking for permission first (i.e. signing your application and requesting the proper permissions in your JNLP file).
The JNLP BasicService can be used to retrieve the URL (and therefore the server) the application was loaded from.

How to Recreate the Business layer for Deleted Universe

Hi ,
I have moved the universe from DEV to PROD insted of copy. after MOVE i have lost the universe from DEV folder then the reports pointing to the DEV are not working . Now my DEV universe is moved , there is no universe in DEV Folder then i have placed my back up universe in to DEV folder and returns with the error named "You do not have the right to access data returned by this universe. (Error: INF )" , If i try to edit the qurey returns with error named "No business layer sent back from server" and i try to change source of my DEV reports but the Change Source option is disabled.
The below options i have tried
1. Refresh Structurre of universe and Exported
2. Request the universe and connection access from BO admin team (They have refused)
Please suggest me if there any work around.
Thanks in advanse.
Regards
MKR

Grant permission to the user on top of the universe, universe connection , folders and reports under the folders.
Before doing this login with admin account and test running of the reports. if there are no issues with admin then just grant the user access. its simple

Sending files back from color to fcp 7, but experiencing issues

I have four sequences in a FCP 7 project. I sent three of them to color from FCP 7, completed my grading, rendered and sent back to FCP 7. I did the same for the fourth sequence; however, when I opened this sequence in FCP 7 it had over written one of the other timelines media into the same clip lengths as the one I just sent back. So it had media from another project, but with the same clip lengths as the I had just sent back from color. I have never experienced this before. I am working for an advertising agency and I am basically getting raw footage ready so that it can be send to an animation house who is going to be adding their animations, transitions and exporting the project. This project is on a tight deadline and need to figure this issue out quickly. Is this indiciative of corrupt files somewhere? If any one has had this issue please share how you rectified it.
Thanks.

Color renders out the files and gives them new names... g_1, g_2...and so on. If some of them are exactly the same length as another one that's labelled g_1...FCP could connect it to the wrong one and whammo, your issue.
The REEL numbers should transfer. But if your footage doesn't have reel numbers, then it will link by name and length often. Yeah...messed up.

BO 4.1 SP4 IDT - Not able to publish the Business layer onto the repository

Hi All,
We are facing issues while publishing the Universe onto the repository. Just to give a background of the issue, we are connecting to Oracle 9i database from BO 4.1 SP4 Information Design Tool. We have client tools installed on one VM server and BO enterprise server on the other VM . I have installed Oracle 11g client 32 bit on the client tools server and 64 bit on BO Enterprise server. I can create a session to the BO server from the IDT tool successfully I have even created a secured connection published on SAP BO server which means there are no port issues.
I create the data foundation and business layer on IDT. I have created a test one with only two simple tables and do an integrity check and it works fine. When I publish the Universe, after I click the Finish button, it just freezes and doesnt get anything back for a long time. After that period, the finish button gets enabled again and if I check on the server, Universe is not published.
Based on the KB 1586166 - How to enable tracing for BI4.x client applications I created two BO_Trace.ini file in the following directories:
C:\<user-dir>\.businessobjects\bimodeler_14\config
D:\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\conf
I was getting the trace files earlier as well but I just changed to see if something happens. I I have a hs_error_pid4198 file created on monday, but it seems to be a java environment error file. I am not sure if its related. The trace I see on the InformationDesignTool_ncs file is
trc file: "InformationDesignTool_ncs.trc", trc level: 1, release: "720"
M
M [Thr 5788] Thu Aug 21 11:09:28 2014
M [Thr 5788] NCS trace timer thread is successfully triggered
M [Thr 5788] Trace dispatcher thread is successfully triggered
M [Thr 5788] NCS data timer thread is successfully triggered
M [Thr 5788] Data dispatcher thread is successfully triggered
M [Thr 5788] NCS library version 2.3.9 (unicode) loaded
M [Thr 5788] NCS_ProcInit API invoked
M
M [Thr 5052] Thu Aug 21 11:09:33 2014
M [Thr 5052] ***LOG Q0I=> NiBufIConnect: connection pending after 500ms: connect (10035: WSAEWOULDBLOCK: Resource temporarily unavailable) [nibuf.cpp 4634]
M [Thr 5052] *** ERROR => NiBufIConnect: non-buffered connect pending after 500ms (hdl 1;127.0.0.1:59818) [nibuf.cpp 4645]
M [Thr 5052] *** ERROR => NI raw handle failed to be initilized at IDEL to CONNECTED, connection to agent destination failed to be established in agent 1 [ncsmtdatasen 137]
M
M [Thr 5740] Thu Aug 21 11:10:28 2014
M [Thr 5740] *** ERROR => NI raw handle failed to be initilized at IDEL to CONNECTED, connection to agent destination failed to be established in agent 1 [ncsmtdatasen 137]
M
M [Thr 2428] Thu Aug 21 11:53:19 2014
M [Thr 2428] NCS_ProcExit API started
M
M [Thr 2428] Thu Aug 21 11:53:20 2014
M [Thr 2428] Timer threads are successfully finished
M [Thr 2428] Data sending threads are successfully finished
M
M [Thr 2428] Thu Aug 21 11:53:21 2014
M [Thr 2428] NCS_ProcExit API invoked
Initially I was getting the following error on 18 Aug 14
FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
ENCODING:UTF-8
RECORD_SEPARATOR:30
COLUMN_SEPARATOR:124
ESC_CHARACTER:27
COLUMNS:Location|Guid|Time|Tzone|Trace|Log|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
SEVERITY_MAP: |None| |Success|W|Warning|E|Error|A|Assertion
HEADER_END
|3E293DA41362474BA0789573468E97B20|2014 08 18 16:44:52.105|+1000|Error| |>>|E| |idt| 4168| 1|main | ||||||||||||||||||||||Cannot read TraceLog configuration file 'conf/tracelog.ini'.-
|3E293DA41362474BA0789573468E97B21|2014 08 18 16:46:02.808|+1000|Error| |==|E| |idt| 4168| 40|Check integrity CIR 01401| ||||||||||||||||||||com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder||DataFoundationSQLDecoder.decodeExpression: encodedExpression is null-
I am not seeing this error after I created the tracelog file .ini based on the KB mentioned. I have a trace file generated in the workspace folder but its 12MB size which I wont be able to post it here.
Any suggestions to resolve this error would be of great help.
Regards,
Rohini.

Hi
Follow the below steps: Publish the Universe to the Repository.
Select the business layer under project -> Right Click the Business Layer and select, publish repository from the menu. -> and next --> Choose the Repository Folder to store the Universe --> Publish Universe After clicking the “Finish” button
Note : Ensure the Connection for the corresponding Data Foundation is a Secure Connection.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903a7fc7-19e8-2d10-fa95-b050de946b61?overridelayout=true
http://www.youtube.com/watch?v=4lvrKex4ubc

Column Modification impact to Data foundation, Business layer and Data source in DS 1.2

Issue
An existing Business Layer that is consumed by a Data Source definition in Design Studio 1.2 Version: 12.0.2.201311041742 seems to invalidate the entire Data Source object after modification to the base tables DDL (data definition). Information Design Tool used is Information Design Tool 4.1, Build:14.1.1.1036, Version: 4.1 Support Pack 1.
Background
A modification was needed a base tables DDL (data definition). Specifically a column that stores the Date value as a varchar needed to update to a Date data type. After the modification was completed the Data Foundation and Business Layer in the Information Design Tool (IDT) needed
modification as well to reflect the updated column data type. Refreshing the Data Foundation and/or the Business Layer did not update the column Data Type. The step of dropping and re-inserting the updated table in the Data Foundation and subsequently the Business Layer updated
the expected columns Data Type as expected. All the existing Data Source definitions that were in use throughout the application (Design Studio) were invalidated causing the following error after the DDL update.
After rebuilding the Data Source definition in Design Studio, the issue was no longer there however, the existing Data Sources were still non-functional and were subsequently deleted.
In Sum
Is there another way to make changes to the base table(s) without negatively impacting the Data Foundation (IDT)àBusiness Layer (IDT)àData Source Definition (Design Studio) to the point where Data Sources on the Design Studio have to be redone preceded with similar effort at the IDT level? Is there a step(s) that I missed?
Any insight would be appriciated.
Regards,
Kris

Hi Kris - it looks like you have not downloaded the latest SP's for Design Studio 1.2
http://service.sap.com/sap/support/notes/1954748
I recall in late May SAP issues SP2, and earlier in the year they issued SP1 - could you apply both SP's, client-side and platform-side?

Inbound MDN's are being sent back to Internal delivery channel

AS2 over HTTPS (sync MDN's) are being sent back to inbound IDC rather than b2b consuming them , can any one point the root cause
Thanks,
Kalyan

Hi Kalyan,
Make sure that you are enabling "Is Acknowledgment Handled By Integration B2B?" in HOST trading partner.
Oracle B2B never defaults an IDC from any other business action. Moreover agreement configuration elements are independent of business protocol being used.
Each and every agreement will have a field "Responding Internal Delivery Channel " but this field appears if you selected "Yes" from the "Is Acknowledgment Handled By Integration B2B?" list when creating a remote trading partner on the Operational Capabilities page.
This field of agreement is used to select the internal delivery channel to use for responding to (acknowledging) messages.
Cross-check your business action configuration and corresponding agreement configuration again.
Please let me know the result.
Regards,
Anuj

Doubt on OLAP Business layer

Dear Experts,
I am new to IDT. I have started getting the concepts.
My doubt is, OLAP Business layer will created without using Data foundation.
In this case, don't we need schema for the relevant tables huh? . How the normalization of tables and joins will be handled? .
can anyone please explain me ?..
Thanks in Advance!
Bala Krish

Hi
while creating universe you have two options to select the connections
OLAP Connection
Relational Connection
As per your requirement you have chosen OLAP Connection i think.
So OLAP connections to connect to an SAP NetWeaver BW data source based on a BW server, a cube, and a BEx query.
If your backed as BW ...then No business layer or universe is required to access BEx queries. We can directly select the BEx query as a data source.
You can do all the calculations & data restriction (CKF, RKF, Filters and Variables) and use Bex Q as direct source.
Please find the below link. To know the difference b/w OLAP and Relational connections and what are the advantages using the OLAP connection.
SAP BW is an OLAP vs. Relation connection
http://scn.sap.com/community/semantic-layer/blog/2014/04/14/sap-bw-is-an-olap-vs-relation-connection

Business Layer not refreshed automatically

Dear Friends,
I'm working on IDT for creating business layers based on SAP BW Multi-providers. The issue I'm facing right now is that whenever I modify the underlying Multi-provider, my business layer is not getting refreshed automatically with the changes.
Please let me know if I need to do any settings in IDT for the business layer to get refreshed automatically or do I need to create a fresh design right from creating the connections.
Many Thanks,
Karanam.

Another quick question with something similar to above. I am building the UNX universe on top of Multi Provider and I noticed that normal select statements on Dimensions would return "ZERO" records unless a measure is included in the query. Is there a workaround for this? I do not mind using a dummy null measure for simple queries. However, this is becoming cumber some when doing cascading prompts. IDT has a simple way of doing it but me without being able to generate LOVs without a dummy measure, its becoming difficult to implement cascading LOVs.
Now the 2nd question is, I am developing all in DEV. When I use LCM and promote it to my QA, I can go ahead and create a new connection pointing to my QA Backend. However, when I try to change the connection from Dev to QA in the IDT Datafoundation "Connections" tab, it allows me to change the connection. However, the objects in the Business Layer does not reflect the new Calalog Name of the QA connection and none of them would parse. For example, Lets say my Dev connection is named D31Conn and my QA connection is named Q31Conn. Their catalog names by defaulyt are D31Conn and Q31Conn. Now, after developing my universe in BOBJ Dev and promoting it to QA, I am creating a new connection in BOBJ QA called Q31 Conn. When I open the promoted universe and try to change the connection from D31conn to Q31conn, it does it successfully. However, in my business layer, all objects would not parse and woul fail because their SQL still points to the old Catalog D31Conn instead of Q31Conn. Am I missing something here? Any help is much appreciated !
Ramki
Edited by: Ramki Krishnamoorthy on Mar 6, 2012 2:46 AM
Just a Quick Update, I forgot to mention that my deployment is BI4.0 SP2 Patch 12

JSF: how to avoid validation but still submit data to the "business layer"

Greetings
The scenario is common and sounds like this:
1) We have 2 forms, each with some fields marked with required = "true"
2) Navigation between these two should be unlimited and data should be submitted to the (stateful) business layer every time we move from one to another, without validation,
thus all of my h:commandButton tags are marked with type="submit"
3) On final "save" command data should be validated and sent to DB
Now,
- if i avoid required attributes on fields, everything works fine except validation ofcourse
- if i add immediate="true" where needed, data gets lost when i navigate from one page to another
thanks a lot in advance

Use an EL expression for the value of the required attribute. Note that the important thing is its value during the subsequent request. If you have other types of validations you may have to use custom validators.

5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

Step 5.
5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
I keep getting this.
The Bank and Paypal states that Adobe needs to process my transaction twice.
I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

HT4623 I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP

I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

BOXI4 SP2 P12 - No Business Layer Sent Back From Server

Similar Messages

Maybe you are looking for