[boxir2-sp4] two separate CMS with same cluster name

How can I change the current cluster name. Currently have two separate CMS on two separate servers but with the same cluster name. They both show up on each others CMC -> Servers page. This was not our intention.
Please advise.
Thanks.

Login to CCM, stop CMS server, go to it's properties, go to Configuration tab, check "change cluster name box" and type new cluster name, click apply, OK, start CMS. Done
Make absolutly sure that each CMS is pointing to it's own CMS DB !!!

Similar Messages

Confusion of aliases made for two SMB shares with same folder name

I have a SMB file server here which provides me with a Departmental personal home filestore and also a Departmental personal web filestore. The name of the folder is the same in each case - my Departmental user name. If I check the Finder Preference 'Show these items on the desktop' for 'Connected servers', I can use the Finder's 'Connect to Server' for each - smb://webhome/john and smb://home/john - to make each of them appear on my desktop as 'john'.
It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.
Alas, each alias always points to the same (apparently randomly selected) share!
This looks like a bug to me. I've tried unchecking the Finder 'Connected servers' preference, and then the shares appear under folder 'SHARE' - where I cannot create any aliases at all; I get the error message 'Operation could not be completed (Error -8058)'.
Reader, do you know of a work-around which will let me distinguish on my desktop between my two identically-named folders from different shares? Alas, I have no power to change the names of the original folders.
John A. Murdie

+It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.+
I should have said that one cannot rename the share icons in the usual way. Not being able to do this is the real bug here. If I'd been able to do this I wouldn't have need to try to create aliases, of course.
John A. Murdie

Two attached libraries with same package name

Hi everybody!
Excuse my bad english,
I have a Form (in Borms 6i) with 2 attached librairies. In these libraries, I have 2 packages and 2 procedures with the same name.
How I can call the good one in specific library?
Thanks so much
Valerie

Valerie,
I don't think that there is a solution for this and Forms always picks the procedure of teh library you attached first. Is renaming the functions and procedures and option ?
Frank

Creating Keyboard shortcut for two different actions with same menu name..

Am using soundforge pro .. I have to process nearly 1000 audio files, and want to create shortcuts for "Smooth"
The problem is there are two Menu names named "Smooth"
Fade In > Smooth
Fade Out > Smooth
I want to assign different shortcuts for each one.. Is it possible ?
Any help is appreciated

Hi,
I would use IP Address range boundaries instead which I normally do anyway instead for the AD site.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Where statement on two different tables with same column name

Hello,
I have 2 financial tables:
tblincome, tblexpenses
in each table I have column name "monthPayed" (have values of all the months of the year).
I would like to create a balance view table that will show me the financial status for the Q1 (for example).
I have a column totalIncome and totalExpended respectively.
I've create a view table that shows me the financial balance at the moment but I want it to be devide to Quarters of the year...
Regards

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Where is the code you already tried? Or are you so lazy, so rude or so privileged that you did not do anything for yourself?
In fact that silly “tbl-” prefix is so bad that it has a name! It is called Tibbling and Phil Factor even wrote a humor article on bad programmers that use it.
Your narrative is vague; it sounds like this is the DDL:
CREATE TABLE Incomes
(payment_month CHAR(10) NOT NULL PRIMARY KEY,
income_amt DECIMAL(12,2) NOT NULL
CHECK (income_amt > 0.00),
CREATE TABLE Expenses
(payment_month CHAR(10) NOT NULL PRIMARY KEY,
expense_amt DECIMAL(12,2) NOT NULL
CHECK (expense_amt > 0.00),
>> in each table I have column name "monthPayed" (have values of all the months of the year). <<
I hope not! 2014 has not gotten to September, November or December yet! And the ISO-11179 data element name should be “payment_month”; but it is still wrong! An expense is not a payment! An income is not a payment!
>> I would like to create a balance view table that will show me the financial status for the Q1 (for example). <<
Report Period Table
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Something_Report_Periods
(something_report_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (something_report_name LIKE <pattern>),
something_report_start_date DATE NOT NULL,
something_report_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (something_report_start_date <= something_report_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
Now figure it out for yourself, show us what effort you put into this, then we will help you.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Two Coherence instances with same JVM

Hi all,
I have a special case need your advice.
we have an architecture platform build on top coherence to support some system data (session persistence data...etc).
and we are building applications on top the platform, the applications also need coehrence to support Application distributed data.
which is the best practice:
- Load two coherence instances with two separate configs
- share same instance with same config file
to isolate clear two parts, we prefer first solution, but we don't know which is drawback for this solution.
Best regards.
Jerome

Hi John,
I beg to differ: all you need to do is ensure that Coherence is loaded by two independent class loaders and not from a common parent class loader.
Of course, you can't reuse the same ports so you can't rely on the default Java properties for overrides, but you can use the operational configuration descriptor override feature to specify different settings for things like cluster address, and similar.
Best regards,
Robert

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Reflection - Two packages/classes with same name

Hi There !
I am in a situation and I need some help, if anyone can help me.
I have two tools to work with different version of a server application. Now, the admin wants to have only one tool to work with both server app.
The problem is that the server app has a jar file with the API to be used to access it. One jar for each version.
Inside those jars files I have the same package and the same class ! But the implementation is diferent. So I will need to access one jar when accessing the old server app and another jar to access the new server app.
I have no idea how to do it.
I search arround google and I found that I can load a class at runtime and then with Reflection call its methods.
I made a test app (simple, just 2 different jars with same package and class name just printing a Hello World and Bye World) and it worked very well.
But when I tried to apply this to my code, I realize that one class need the reference of the other class...
For example, I have a class named Server and other called ServerStatus.
The Server class do the connection to the server and the ServerStatus get some server information. But the method that give me this information has a argument asking for an object of Server... like this:
Server serv = new Server();
serv.connect();
ServerStatus servStat = new ServerStatus();
servStat.getServerStatus(serv);I tried to do this with reflection but in the part that I need to invoke the method getServerStatus, I do not have the name of the class that is the argument (in this case Server).
Something like this:
Method m = serverClass.getMethod("getServerStatus", new Class[] {?????.class});
result = (Boolean)m.invoke(server, new Object[] {serverStatus});Do you have any ideiias to resolve this ?
Or something different from reflection to access two different implementations with same package and class name ?
If you need any other information, please ask me..
Thank you so much !
Regards,
Thiago

Thiago wrote:
Hi.
But now, how can I handle the object (because the newInstance() return a Object object.... not the class that I want (Server, for example)).
When you declare a reference to be something more narrow than "Object" you're telling the compiler what methods and fields the referenced object supports. With a dynamically loaded class you can't do that at compile time, because the nature of the class isn't known until you load it at runtime.
That's why it's very handy if you know that the class you are to load implements some interface which is known at compile time. Then you can access the object through a reference to that interface.
Otherwise there's really no option but to handle the object through reflection. Find methods with getMethod() on the Class object and invoke them with Method.invoke().
There are tricks to impose an interface onto a dynamically loaded class at runtime, but they are just neat ways of working through reflection.

Get the Common from Two Internal Tables with same structure

Hi ,
I need to get the Common data from Two Internal Tables with same structure with using the looping method.
For e.g.
I have two internal table say ITAB1 and ITAB2.
ITAB1 has values A,B,C,D,E,F
ITAB2 has values A,H,B,Y,O
Output at runtime should be : A,B

Hi mohit,
1. If u want to compare all fields,
   for matching purpose,
   then we can do like this.
2.
report abc.
data : a like t001 occurs 0 with header line.
data : b like t001 occurs 0 with header line.
loop at a.
LOOP AT B.
    IF A = B.
      WRITE :/ 'SAME'.
    ENDIF.
endloop.
ENDLOOP.
regards,
amit m.

Two query with same technical name in Quality

Hi experts,
I have two queries in Quality with same technical name. I used the program RENAME_DUPLICATE_ELEMENTS to rename the query and its renaming the latest query instead of the old Query. I am in BI 7.0 system and cant find a note that applies to BI 7.0. There are quite a few notes on 3.x system. Has somebody faced the same problem. What did you do. If there is a note for bi 7.0, please let me know so i can resolve with the Basis team.

We had similar issues - this happens when you create a query locally and then transport the same.
The queries have an internal GUID which is generated locally and this causes duplicates.
You can :
1. Delete queries using the GUIDS ( you can find this in RZCOMPDIR or RSRREPDIR tables ) using RZDELETE to delete queries.
identify your older version query and then delete the same and you should be good to go...
also try identifying the same using program
ANALYZE_RSZ_TABLES

How to get two fields with same tech name in LIS Extractors?

Hi Experts,
I need "ERDAT" field from two structures (QMSM & QMFE) in 2LIS_18_IOTASK extractor.
In LBWE first I moved ERDAT from QMSM. When I moved ERDAT from QMFE it gives an error:
"Field with same technical name is already available in the Extract Structure".
I don't want to create Append Structure as we need to write User exit.
Can any one tell me how to get this field added in the extractor from QMSM and QMFE?
Thanks for your help.
Regards,
Sree

this is not possible as the all those fields are put in one structure. per definition you can't put the same field name twice in a structure, table in the data dictionary...
hence, you really need to use an append and fill via user exit
M.

Multiple Infoobject with same technical name

Hi All,
I have a very basic question which confuses me a lot.
I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area - ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
Sorry if i am too elaborate, I hope i have made my questions clear.

Hi,
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
A. same 0CUSTMER you can use the different places it holds same data.
source is the 0CUST_ATTR -> target is 0CUSTOMER.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
A. it will contain the same set of data.
it has the overwrite function.
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
Thanks,
Phani.

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

[boxir2-sp4] two separate CMS with same cluster name

Similar Messages

Maybe you are looking for