BOXIR3 and sybase 15

Hi,
I have some crystal reports published in BOEXIR3 and sybase ase 15 is the source. My reports have prompts and some time the reports works fine but other time they failed. I can not schedule them either. Any body knows if XIR3 has connectivity problems with sybase ase 15? Also I have installed open client 15.
Thanks for your help.

It seems to be [supported|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2029ee7f-5d56-2b10-098c-8a4cb0564362]
Open an incident with support if receiving intermittent results while using a supported driver.
Regards,
Tim

Similar Messages

PI 7.1 and Sybase integration

Hi Gurus,
Could any body post the procedure to integrate SAP PI and Sybase. I am searching for these doucuments but could not find any.
Please do the needful.

integration between different databases are pretty much same procedure. You have to import jdbc driversfor the SYbase database and in the jdbc communication channel you have to reference the connection class. Creating data structure on the database side is pretty much same for all the databases.
If you need any help on the configuration part, Please post your requirements further here.

Does Oracle have Extended Stored Procedure like SQL Server and Sybase?

Hi, i am new to Oracle. I want to know if...
Does Oracle have Extended Stored Procedure like SQL Server and Sybase?
If it does not have, then how can i call outside program written in C or JAVA from the Database stored procedure or trigger?

refer to this link on external procedures
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/manproc.htm#11064

Can Oracle and Sybase Coexist on Sun Box ??

Hello Everybody,
I an trying to find out if Oracle and Sybase can coexist on same Sun Solaris box ??.
I would really appreciate your help.
Thanks,

Definitely. Just be sure to set the kernel paramaters that are needed for each database. (ulimit for Sybase, ISM for Oracle (semaphores and shared memory)). Also be sure that your system has enough memory for the Oracle SGI and the Sybase caches, and that there is still enough for the OS to operate (which is dependent on platform, CPU count, and OS version).
Good Luck,
Mike Phillips

Solaris 8 and Sybase 12

Can anybody tell me if Sybase 12 is supported on Solaris 8. I have been looking at both the Sun and Sybase sites but can't seem to find this info. If anybody has come across it can you let me have the link

12.5 is supported by the Oracle Migration Workbench so you should be fine with this.

WLS 5.1 with SP11 and Sybase connection pools

I had posted back in January about an issue with WLS 6.1 and Sybase connection
pools (see posts 12040 - 12043). This issue has now appeared in WLS 5.1 with
SP 11. I have backed out SP11, but I'd take advantage of the clustering enhancements
in this SP. Any suggestions? Would it be possible to get another one off patch
for SP11?

Could you fill me in as to what problem you were having. We are also using
Sybase with WLS5.1 and experience intermittent truncating of resultsets.
Regards,
Garvin LeClaire
[email protected]
"Pete Auriemma" <[email protected]> wrote in message
news:3c8669ee$[email protected]..
>
I had posted back in January about an issue with WLS 6.1 and Sybaseconnection
pools (see posts 12040 - 12043). This issue has now appeared in WLS 5.1with
SP 11. I have backed out SP11, but I'd take advantage of the clusteringenhancements
in this SP. Any suggestions? Would it be possible to get another one offpatch
for SP11?

SAP and SYBASE Connection

hi all
we are trying to make connection between SAP R/3 and Sybase Unwired plate form.. we have deployed data from R/3 to Sybase using Function Module but still we are unable to update the data of R/3 from Sybase...
Can any One help Us how the data can be updated...
We want to update the Header data of a Notification For this we have code a Function module in SAP R/3..
I m giving U the code Of Function module please chk that code and reply us how the header data can updated. in my Function module I m gettin Some Problem
The code are as Follows....
Import Tab :-
Notif   Type     Qmnum    ( chk Bos Pass Value)
Export Tab :--
TT_data   type    Znotif_data ( whr ZNotif_data is a table type and having data element with name Qmnum Qmart priok ernam Etc...)
Source Code :---
FUNCTION Z_NOTIF_GET_DETAIL1.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(NOTIF) TYPE QMNUM
*" EXPORTING
*"     VALUE(TT_DATA) TYPE ZTT_NOTIF
select qmnum
       qmart
       priok
       ernam
       qmdat
       from qmel
       into table tt_data
       up to 1000 rows.
data : it_tlines like tline occurs 0 with header line.
data : it_text1 like thead occurs 0 with header line.
data : x_header type thead.
      x_header-tdobject = 'feature'.
      x_header-tdname = '99999996020000'.
      x_header-tdid    = 'head'.
      x_header-tdspras = 'D'.
      loop at it_tlines.
      it_tlines-tdformat = '*'.
      it_tlines-tdline = it_text1-tdtxtlines.
      append it_tlines.
      endloop.
      CALL FUNCTION 'SAVE_TEXT'
        EXPORTING
*         CLIENT                = SY-MANDT
          HEADER                = x_header
         INSERT                = ' '
         SAVEMODE_DIRECT       = 'X'
*         OWNER_SPECIFIED       = ' '
*         LOCAL_CAT             = ' '
*       IMPORTING
*         FUNCTION              =
*         NEWHEADER             =
        TABLES
          LINES                 = it_tlines
       EXCEPTIONS
         ID                    = 1
         LANGUAGE              = 2
         NAME                  = 3
         OBJECT                = 4
         OTHERS                = 5
      IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      commit work and wait.
      update stxh set tdobject = 'D'
      where tdobject = notif.
*UPDATE qmel SET indtx = 'X' WHERE qmnum = notif.
        ENDIF.
ENDFUNCTION.
I have added the tdobject, tdname and tdid data elemnet in that table type
please reply we need it
Edited by: Thomas Zloch on Apr 25, 2011 2:01 PM - code tags added, exclamation marks removed

Solved this on my own, we need to create RFC Function module and Update/Modify data query in that when we need to update data in SAP tables.
Connection is depends on RFC Function Module.
Sample inbuilt RFC's in SAP :
1. MAM30_011_GETLIST
2. MAM30_011_GETDETAIL
3. MAM30_011_CHANGE
Connection Property we need to maintain in SAP connection in Sybase.
Also We need Client Details, Server Machine Name, Connection IP and User Name and Password of User by Which we can test Connection.
Thanks
Ram

What's going on with Project "Gateway" and Sybase?

I've just returned from Teched in Berlin where I followed mostly the mobile track of sessions.
I've come away alternately energised and confused. Each topic in its own right is clear, but piecing allthe components together is a different matter.
Has anyone got opinions on the future role of project Gateway? I saw many sessions by Sybase on the SUP and only one which mentioned Gateway. Gateway didn't feature in the mobile strategy slides. However, I have seen material mentioning the future tie-up of the two. If this should happen, then how might they interact? And what future for the co-innovation platform? Can we draw any conclusions on this yet?
The instant value mobile apps session CD161 seems to build on top of the SAP Data Protocol (SDP), but thinking back, they didn't mention Gateway in there at all. And the co-innovation platform session was silent on both Gateway and SDP
So does "Instant Value" equal "Project Gateway"? It can't be since the Sybase guys talk a lot about Instant Value. Are there two interpretations of this term within the organisation?
Just hoping to kick off a general discussion on this subject. All opinions and replies welcome. Especially from insiders...
Alex.

Hi Steffan - good point. I kind of assumed that LMS is another term for Project Gateway... They seem to be addressing the same problem, and the architecture diagrams look qualitatively similar. The CD121 Sybase slides also talk about the "SAP Mobile Connector", which might be yet another name for the same thing. I think you would know better than me since you've already built that thing you showed at the Demo Jam - what data consumption technology was your demo-ed app using?
I get the impression that there have been a number of independent development streams within SAP which are only now being brought together. This manifests itself to us as mixed or incomplete messages. It's easy to see how at a teched, each group might be responsible for getting its own message out and not necessarily integrating into the overall message of the mobile strategy.
So essentially there are two categories of mobile app inthe SAP vision:
1. Instant Value and
2. Mission Critical.
Then there are various methods of consuming SAP backend data from our mobile apps:-
1. Netweaver mobile DOE (via co-innovation platform?)
2. LMS
3. Project Gateway
4. Web services
5. BAPIs (via JCA)
(This is five methods, not four, which is another reason why I thought LMS and Gateway were the same thing).
Then on top (or underneath?) of all this, you have to make a call on whether to make use of the SUP middleware and/or a security product like Afaria.
So perhaps the most likely combinations look like:-
Mission Critical apps with SUP ( + Afaria ) + DOE/Gateway
or
Instant Value apps with (LMS/Gateway or simply Web services/JCA)
But if you have a LOT of Instant-value apps to build I guess your landscape could become complicated enough to justify the middleware too.
Now please someone point out the flaws in this summary!
Alex.
Edited by: ajfear on Oct 20, 2010 6:44 PM

DS and Sybase error 110 state 2 severity 15

Hi Everyone
when i try to load a single decimal column from an SAP extractor
i recieve the following error:
15176
14552
DBS-070602
5/5/2014 5:58:55 PM
Sybase ASE Server message number <110> State <2> Severity <15> From Server <BO01>: Message Text is: There are fewer columns
15176
14552
DBS-070602
5/5/2014 5:58:55 PM
in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the
15176
14552
DBS-070602
5/5/2014 5:58:55 PM
number of columns specified in the INSERT statement.
I think that the problem is reletad to the fact that in italian we use the comma "," for decimal separator.
I tried to change the datastore language and code but nothing changed
Can someone give me at least some clue to fix it?
Thank you in advance and regards
Adriano

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Connection Between Oracle 9.2.0.6 (Solaris 10) and SyBase (AIX)

Hi every one, I need to connect with a trigger (to check if a data value is in Sybase) between a Oracle DB and a SyBase, can some one HELP ME PLEASE!!

http://tahiti.oracle.com
Heterogenous Services

Discoverer and Sybase database

Could we connect Discoverer to Sybase database?
Thanks
Suhail

Hi Stacey
Both 10.1.2 and 11g are compatible with the 11g R2 database.
Best wishes
Michael

Websphere and sybase

I just deployed an EAR file onto my PC (Websphere studio 5.1). It looks fine. Almost jsp work fine, but those jsp connecting to Sybase dont work though I have jdbcdrv.zip already in lib.
Errror is this: "Class com.sybase.jdbc.SybDriver" not found.
Please help how to overcome this. Detailed instructions are much thankful.
Hanna

I tried to install jconn2.jar as follows: (n Websphere):
Pop-Up on Project --> Properties-->Java build path-->Add external JARs--> then choose jconn2.jar from an outside folder then finish.
It looks OK but it doesnot work. The error that I mentioned in previous email is still there.
Anybody help pls. I am a newbie to this one. All jsp that dont relate to Sybase work well. Only jsps wth Sybase connection DONT.
Thanks for your guys attention and assistance.

Hana AND Sybase IQ

Hi there
Not sure if this is the right place where to post this question, but anyway. I'm well familiar with both technologies and have smth like 5+ years experience with IQ and a bit more than year with Hana. I read somewhere or saw the presentation that SAP is going to develop DWH solution where these 2 technologies will be merged as single one: HANA will take care of real time data and let's say 3 month roll-back of DWH data and IQ will store rest of data history, if my memory serves me well then this technology is being called Extended tables of Hana.
Question: is there a documentation available which describes this process more in details, or even architectural approach etc?
I understand that in future this is gonna be implemented in hana with few clicks, but at the moment i believe that extra supervision is needed, in case if it's possible at all!
Mike

Hi There,
Please find the below text from the documentation:
Description
The CREATE EXTENDED STORAGE statement defines an external Sybase IQ database connection for the SAP HANA database. The Sybase IQ database will automatically be used to transparently archive and query data stored in extended tables. Only database users having the system privilege CREATE SOURCE or DATA ADMIN are allowed to create extended storage.
Note: You need to create a extended storage configuration:
You can create an extended table on extended storage
CREATE TABLE T (C1 INT PRIMARY KEY, C2 DATE) USING EXTENDED STORAGE;
You can create an delta-enabled extended table on extended storage
CREATE TABLE T (C1 INT PRIMARY KEY, C2 DATE) USING EXTENDED STORAGE ENABLE DELTA
Regards,
Krishna Tangudu

Connection error with Crystal Report XI, VB6 and Sybase ASE15

Hello !
I have an error #4002 when I want to launch a report in VB6 with the ActiveX Crystal Report Viewer.
I use Sybase ASE 15 with an ODBC link and the reports run stored procedures.
This error seems to be an authentification error, but I don't know what parameters are missing or wrong...
- My reports works well in the report designer.
- The reports connected to a text file or an ADO recordset work in VB6.
- The Verify Database works in design mode in VB6.
- The problem is the same with tables, stored procedures, SQL and with or without parameters...
- I tried to connect the report to a DataEnvironnment but I get the same error.
The problem appears when I use the Crystal Wizard to create a form automatically AND when I create objects directly in code like :
    Dim crapp As CRAXDRT.Application
    Dim oReport As CRAXDRT.Report
    Set crapp = New CRAXDRT.Application
    Set oReport = crapp.OpenReport("C:\myreport.rpt")
    CRViewer.ReportSource = oReport
    CRViewer.viewReport
Please help !

Hello,
I don't see any database logon code in what you posted. You need to log onto the database at runtime since Crystal Reports will never store passwords.
You can download and review the [Connection Properties|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00635998-751e-2b10-9cba-f50ee1e4ef81] document for more information on how to log onto your database at runtime. This document was written for CR9, but it's the same for CR10, CR XI (v11.0), and CR XI R2 (v11.5).
I hope this helps.
Sincerely,
Dan Kelleher

Java and Sybase nested stored procedures.

Hi!
I have nested Sybase stored procedures, the main procedure calls a helper stored proc.
The main procedure returns 2 result sets before calling the helper store proc and helper store proc returns 1 resultset. After the helper store proc is called, the main store proc returns 2 more resultset. When I run it using SQL client tool the main procedure(and it's helper) execute well and returns rows.
I need to call this store proc in a java code and display all the resultset in screen. I am using Statement:execute(<exec sp>) to execute the store proc and then statement.getResultSet() to get each resultset. The loop is controlled by statement.getMoreResults() .
It displays the first 2 resultsets from main Store Proc. Then the control goes to helper store proc. It executes the helper store proc and displays the resultset from helper. But then it stops there and doesnot
come back to main store proc to execute the remaining resultset.
What I suspect is that, the statement object is getting overlaid when the call goes to helper proc.
Any idea as to how to code to handle multiple nested resultset ?
~ RNS.
My Sybase stored procedure code looks like -
=======================================================================
create procedure main_proc
@param1 int
as
select getdate()
select @@servername
declare @return_val int
exec proc2 @param1, @return_val out
select myCol1,
myCol2,
myCol3=@return_val
from mytable
select db_name()
===========================================================================
Sybase Code for proc2
create procedure proc2
@param1 int,
@param2 int out
as
begin
if something exists(select * from table where whereClause)
select @param2="TRUE"
else
select @param2="FALSE"
select getdate()
end
go
GRANT EXECUTE...
EXEC sp_procxmode 'dbo.proc2,'unchained'
go
====================================================================
Code snippet :-
do {
int iit=0;
rs=stmt.getResultSet();
if ( rs != null ) {
ResultSetMetaData rsd = rs.getMetaData();
int nocols = rsd.getColumnCount();
for (int i=1; i<=nocols; i++)
System.out.println(rsd.getColumnName(i)));
while (rs.next())
for (int i=1; i<=nocols; i++)
System.out.println(rs.getString(rsd.getColumnName(i));
} while (stmt.getMoreResults());

I'm not 100% sure about this, but my guess is that this is caused by the TDS protocol (used by Sybase). TDS makes no difference between the stored procedure you are calling and the "inner" stored procedure, so the driver just returns update counts and result sets as they are generated, regardless of who generated them.
Another guess (as I don't know what driver you are using) is that execute() returns the first result (update count or ResultSet), as opposed to executeQuery(), which returns the first ResultSet (probably discarding the update count). You can make sure of this by calling getMoreResults(); you should get your ResultSet at some point.
Alin.

BOXIR3 and sybase 15

Similar Messages

Maybe you are looking for