BOXIR3- Unable to log on : Could not connect to server - FWM 01003 null

Hi
I've just installed for the third time BOE Premium Server XIR3
Config:
Windows Server 2008
BOXIR3
CMS on MySQL
Tomcat 5.5
I've installed from scratch my server and I could not connect to any application
CCM : the SIA is up and Running, but I could not manage server to see what is launch on the server
> Error : Unable to log on : Could not connect to server SERVER_NAME:6400. Please check that the server name is correct, and that the server is running
Tomcat Configuration: Can't connect to that services too
-->Error : Unable to open the service BOE120Tomcat
CMS / Infoview : Unable to connect too.
--->Error : The server SERVER_NAME:6400 is not found (FWM 01003) null
(Here I translated the error message because I've got the message in french...)
Concerning the MySQL database, it's seems to be correctly installed as I can access the database via MySQL Admin tool.
I've seen lots of similar issue but I never found any resolution or workaround.
So If you have any ideas to help me it would be great as I must make a demo on customer site on monday morning :o(((
Many Thanks
Anne-MArie

Hello,
Please refer to the following KBAs, may be this can helps you:
http://service.sap.com/sap/support/notes/1884899
http://service.sap.com/sap/support/notes/1351898
And as Sneha said, make sure that the SIA and the CMS don't use the same port number.
I hope that this helps you.
Regards,
Asma

Similar Messages

Could not connect to server after OS got blue screen, Pls help.

Hi Expert,
i want to ask about this error.
when i'm trying to log in in BO Universe designer.
I'm getting this error.
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Unable to log on: Could not connect to server ekawati-f4e1e59:6400. Please check that the server name is correct, and that the server is running.
(hr=#0x80042a01)
service database and BO is already running.
it's happening after my os got blue screen.
does blue screen affect that much to BO?
how to solve it?
Please advise.
Thanks.
Regards,
Y Permana.

Thanks for your replied.
I checked in manage servers, the [BO server].connectionserver is stopped.
After i checked in services, the database(MySql) service can't turned on if the CMS service is already running.
is that ever happen in your experience?does it happen to other database?
Could you tell me, what priority to turned services whether database, CMS or BO server?
Thanks.
Regards,
Y Permana.

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.

Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

EAS - Error: "Could not connect Administration Server

hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?

If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

Network error could not connect to server 127.0.0.1:5900

I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. Thanks

Hi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian

Subversion (SVN) checkout could not connect to server. Some default config prevents connections?

Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1

Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1

Could not connect to server Ovi Suite 3.1.0.84

when i update my nokia e71, ovi suite asks for login id and when i put username it show could not connect to server check your internet etc.. my internet is perfectly working . i have tried all ways like GTE cerficates removal and rootupdate etc. i m fed up of these.. plzzz help me nokia experts. i m using Ovi Suite 3.1.0.84 and also used .94 version but no help. i m using Xp SP3 with 1.49 gb ram and 50 gb hardisk

Download and upgrade new version NOS3.1.0.86 and try
http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Administration server error: could not connect to server

I was just viewing some outlines and calc scripts. I got un error trying to close a clac script. It said unable to unlock and then closes EAS. I tried to log back in and I am getting a could not connect error. How do I fix this or do I just recycle the server

A little less drastic is to restart the EAS service. I've had an occasion or two where the service just up and stopped for no apparent reason, leaving me hanging with several hours of work to be redone in an outline... <sigh>
Anyway, restarting the EAS service may be all that you needed to do, it may have aborted or hung itself.
Edit: clearer to say service here rather than server.

WLC connect LDAP for Authentication, but could not connect to server

Hi Everyone, I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae:
Service Port - Not connected
Distrubution port include:
     Management Interface - in AP Management VLAN - 30
     Student AP interface - in Student VLAN - 20
     Staff AP interface - in Staff VLAN - 10
AD is in Staff VLAN - 10
WLC LDAP Server setting
Base DN:OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
User Attribute: sAMAccountName
User Object Type: Person
Debug aaa all enable message
*LDAP DB Task 1: Jul 09 01:40:58.969: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapInitAndBind [1] configured Method Anonymous lcapi_bind (rc = 1005 - LDAP bind failed)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to IDLE
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to RETRY
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP_OPT_REFERRALS = -1
WLC GUI Log:
*LDAP DB Task 1: Jul 09 02:56:13.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:11.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:09.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
LDP Message of LDAP BaseDN:
Expanding base 'CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk'...
Result <0>: (null)
Matched DNs:
Getting 1 entries:
>> Dn: CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
4> objectClass: top; person; organizationalPerson; user;
1> cn: Frankie F. Yeung;
1> sn: Yeung;
1> givenName: Frankie;
1> initials: F;
1> distinguishedName: CN=Frankie F. Yeung,OU=OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
1> instanceType: 0x4 = ( IT_WRITE );
1> whenCreated: 8/10/2011 10:28:14 China Standard Time China Standard Time;
1> whenChanged: 8/10/2011 10:31:26 China Standard Time China Standard Time;
1> displayName: Frankie F. Yeung;
1> uSNCreated: 3850555;
1> uSNChanged: 3850571;
1> name: Frankie F. Yeung;
1> objectGUID: 6ebfc7e9-6989-4f11-bae7-62c23af67edc;
1> userAccountControl: 0x10200 = ( UF_NORMAL_ACCOUNT | UF_DONT_EXPIRE_PASSWD );
1> badPwdCount: 0;
1> codePage: 0;
1> countryCode: 0;
1> badPasswordTime: 0;
1> lastLogoff: 0;
1> lastLogon: 0;
1> pwdLastSet: <ldp error <0x0>: cannot format time field;
1> primaryGroupID: 513;
1> objectSid: S-1-5-21-3867848445-1581729766-1247451615-2172;
1> accountExpires: <ldp error <0x0>: cannot format time field;
1> logonCount: 0;
1> sAMAccountName: fckyeung;
1> sAMAccountType: 805306368;
1> userPrincipalName: [email protected];
1> objectCategory: CN=Person,CN=Schema,CN=Configuration,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
Hope I can resolve this problem ASAP, thanks!

Your AD is in the Staff Vlan so maybe the WLC uses the Staff interface instead of management to contact the AD. I don't know how you sniffed exactly.
The comment about eap methods you saw is when you use LDAP with dot1x security. It is the same as saying "You cannot do peap-mschapv2 or eap-fast-mschpv2 with LDAP".
But you can do LDAP for web authentication, that has no eap methods.
Your original problem was a binding problem from the WLC, so we can expect that the WLC really is sending traffic towards AD.

Attendant Console could not connect to server after upgrade

All,
I upgraded a BE CUCM/Unity Connection server from 6.1.2.1000-13 to 6.1.4.2190-3 and after the upgrade, the AC client software could not connect to the CUCM server. After checking all of the obvious things and rebooting the computer on which AC client was running, I finally figured out a workaround. The CUCM server was configured with a host name of UCM1 and a domain of localdomain. The AC clients were pointing to UCM1. If I added a record in the client's hosts file (%WINDIR%\SYSTEM32\DRIVERS\ETC\hosts) which pointed UCM1.localdomain to the IP address of the CUCM server and then pointed the AC client to UCM1.localdomain, everything worked great. I'm just wondering why this happened. The client must pass the name of the server in the payload (rather than simply using the name to resolve to an IP address). So why, all of a sudden, does the server care about the FQDN? Just curious if anybody knows or has run into this same issue.
Regards,
Steven

Hazel,
Any chance you could send me a Wireshark capture of the traffic coming to/from one of the affected client PCs during the login process? Also, please include any log files in the client's AC application folder (or sub-folders) as well as event log data from the system and application event log for the timeframe spanning slightly before and after the login attempt.
Also before doing any of this please clear the DNS and ARP cache of the client PC:
ipconfig /flushdns
arp -d *
Regards,
Steven

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Error " Could not connect Administratin Server "

Hi All,
I am getting an error while connecting to Administratin Server " Could not connect to Administration Server "
Server : AIX 5.3 ML7 64 bit
Application Server : Apache Tomcat
Version : Hyperion System 9.3.1
While configuration it does not give any error and shows the successfully deployed.
I re-configured the Adminstration Services again, stopped / re-started the services, but it did not help.
Any suggestion / help would be highly appreciated. Thanks !
Regards
BD Mahendru
Presently in Jordan : + 962 777 603308

AIX server for SS. I didn't want to mess up my original files so I created a new start script and a new setJavaRuntime script.
You can use FTP to send the copied file and edit. there and sent it back
1. Make a copy of the file /Hyperion931/deployments/Tomcat5/bin/ startSharedServices9.sh
2. Edit the original startSharedServices9.sh file and change the section that sets the Java:
To check JAVA HOMe. please type env or open the . .profile and you should see that,
This is what you will see.:
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime.sh"
to
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime142.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime142.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime142.sh"
3. Copy the Hyperion931/common/config /setJavaRuntime.sh to setJavaRuntime142.sh
4. Edit the setJavaRuntime142.sh file and modify the JAVA_HOME to point to Java 1.4.2:
JVMS="JRE-IA64 JRE-64 JRE"
for JVM in ${JVMS}; do
if [ -x "${HYPERION_HOME}/common/${JVM}/${VENDOR}/1.5.0/bin/java" ]; then
JAVA_HOME="/usr/java14"
break;
Use the modified startSharedServices9.sh to start Shared Services.
Perform the Sanme with AAS also.
Kind Regards,
Sriram

Could not connect to server

Hi,
I am new to this forum. I have a client web site in java. when I am trying to access that site I am getting the login page. But there is a comment could not connect to the server. Can any one help me on this topic.
The application is in applet and RMI
Regards
Abhilash

For the full configuration sequence, see the OS X Server 10.6.8 Getting Started and related manuals.
The first two steps I use involve getting the IP network configured and going and ensuring that your server's DNS services are configured correctly and started.
DNS services are not optional. That service needs to be functional for at least the server's own local needs, and (once that's working locally, there's little reason not to set up DNS for the rest of the NAT'd network), or all sorts of other stuff goes weird.
From out here in the internet boondocks, server.sudarja.com is a CNAME, which usually means that DNS is incorrectly configured somewhere. Should you get around to SMTP, a CNAME will definitely blow up. In general, the server needs a DNS A (machine) record. It can then have zero or more CNAMEs.
To test your local DNS directly on your server, launch Terminal.app from Applications > Utilities and enter the following (diagnostic, no changes are made) command:
sudo changeip -checkhostname
The sudo there will prompt for your administrative password, and the command will then check and show you some details and whether local DNS is correct and no changes are required, or if there are DNS or network errors and changes are required.

Could not connect toadministrator server

**Hi,**
**we migrated application dev to prod ....but when i add prod server ip in consol like------enterprise view -> Administrator servers->RC ->Add administrator server.**
**here i add the server ip of production...next ---> exit. and i tried to connect the prod server .......but it is showing the error like =="Could not connect the administrator server".**
**any one help me on it .**
**thanks in Adv.**

try to restart your Hyperion server.

BOXIR3- Unable to log on : Could not connect to server - FWM 01003 null

Similar Messages

Maybe you are looking for