BOYD ISE Native Supplicant Windows 7

Connects to BYOD-SSID
and go through the process, including self registration
once everything is done, my windows machine does not automatically selects certificate (TLS) for authentication
maunally need to go under proprites and select certificate and then it authenticates.
I though this all should be automatic!!!

Are there multiple certificates installed on the client OS at the time of onboarding? Also are you running the latest supplicant provisioning wizard for windows on your ise deployment?
Thanks,
Tarik Admani
*Please rate helpful posts*

Similar Messages

IOS 8.x Apple users and CISCO ISE native supplicant provisioning not working

Hi there guys ,
I was wondering if anybody else have the following problem:
Apple iOS 8.x users are not able to register their devices on the ISE portal (native supplicant provisioning).
After they receive the redirection from the WLC, they freeze. Apple 7.x users have no problem.
ISE is version 1.2.1.198 patch 2. WLC is running 8.0.102.14.
Anybody experienced the same?
MB

I am also running ISE 1.2.1.198 patch 2 with 8.0.100. I am testing with an iPad running IOS 8.1. The device will register in the registration portal, but is not being classified as an IOS device within client provisioning, I believe. It is getting profiled as a workstation even though all apple device profiles are enabled. I have an authorization policy for registered devices, and ipad, iphone, ios devices to gain access to the network without going through posture assessment. I then have my posture assessment authorization rules with apple IOS devices set for a ssid native supplicant profile. I keep getting an error page on the iPad when connecting to the ISE SSID saying "Client Provisioning Portal ISE is not able to apply an access policy to your log-in session at this time. Please close this browser, wait approximately one minute, and try to connect again". It gives this message over and over. If I turn off the posture checking authorization profiles, the IOS device is selected as a rule further down which tells me that ISE does not recognize it as an IOS device in the profiling or client provisioning.

ISE 1.2 Windows 8.1 onboarding

Hello,
We have some problems with our ISE 1.2 during onboarding BYOD's.
Onboarding works fine for a lot of devices. But when onboarding a Windows 8.1 laptop we receive the following error:
"Your device is not supported"
We using the latest ISE 1.2 patches, the Feed Service has downloaded the latest updates and we use the latest Client Provisioning Resources.
Please can anyone help us to find and fix this problem?

Operating Systems Supported by Native Supplicants
Native supplicants are supported for these operating systems:
•Android (excluding Amazon Kindle, B&N Nook
•Mac OS X (for Apple Mac computers)
•Apple iOS devices (Apple iPod, iPhone and iPad)
•Microsoft Windows 7, Vista, and XP

Native Supplicant "NAK requesting to use PEAP instead"

Hello,
We have a Cisco ISE infrastructure in place and we're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the native Windows supplicant to use EAP only?
"Microsoft: Smart Card or other certificate" is selected under network authentication method, by group policy, and I thought that wouldn't allow PEAP, but our ISE logs show "NAK requesting to use PEAP instead", after which authorization
fails because we're not using PEAP.
For what it's worth, the user can fail authentication for hours and I can either allow open authentication on the port for a bit, or the user can leave for the day and come back tomorrow and authentication will succeed. I'm not sure if it's an ISE problem or
a supplicant problem, but I'm leaning towards supplicant.
Thanks,
Andrew

Hi,
About this issue, please contact Cisco Tech Support for help.
Karen Hu
TechNet Community Support
I've already been in contact with them and they've verified our configuration. All that can be done on the Cisco side is to "propose" the client to go through EAP-TLS as the first option, which we are doing. This will not block any clients trying to connect
using other protocols, and, though this will propose EAP-TLS, there is now way to enforce it at the supplicant level. This will be a client decision always. From Cisco:
Please monitor this after the change we applied, but if the issue persists, since we are dealing with windows supplicant, it would be a good idea to involve the native supplicant support.

ISE authentication with windows hibernate

i have ISE 1.2 , machine can't authenticate during hibernate so user must logoff and login again.
is this applicable on ISE or not?

If you are using windoze native supplicant, try using anyconnect nam. There is a bug (feature) in the native supplicant that causes it to go brain dead after returning from sleep mode/hibernation. Microsoft has hotfixes for vista and later, but not xp. I've had hit and miss success with these, and that's why I suggest trying anyconnect.
Sent from Cisco Technical Support Android App

Native boot windows 7 ultimate on VHDX

Hi
I have been searching around for this but there's seems to be no answer and so I hope Microsoft tech support can help me answer this.
I have a PC which I want to dual boot windows 7 Ultimate and windows 8.1 Professional, both on vhdx.
First I installed windows 7 ultimate onto a VHD and it is able to boot natively.
I then install windows 8.1 professional onto a VHDX and now it can dual boot both win7 and win8.1 natively (vhd and vhdx respectively) with win8 boot menu.
Then I boot into win7 and installed kb980218 (to support 4096 disk), and converted the image from vhd to vhdx and set the physicalsize to 4096.
Next the boot entry has been amended and point to this new win7 vhdx.
However when I try to boot into this new win7 vhdx, it doesn't boot up and instead goes into recovery mode, the error is "boot configuration is corrupt" when trying to repair it. FYI, booting into win8 vhdx still works fine.
My question is given the system partition boot environment is windows 8.1 as in this case (requirement of native boot), can you natively boot windows 7 in vhdx????? If so how to make this work? (there should be no difference to the guest OS whether
its' a vhd or vhdx and so given the boot environment is windows 8, my guess is it should work)
And if not, can windows 7 install in vhdx and run inside a virtual machine (e.g., with Host OS as windows 8)
Thank you.
John

>If so how to make this work? (there should be no difference to the guest OS whether its' a vhd or vhdx and so given the boot environment is windows 8, my guess is it should work)
I've never tried this and not likely to, but the base OS definitely needs
to know how to access a VHDX and since Windows 7 predates VHDX, I suspect
it can't be done.
Once the Windows 8 boot loader passes the running off to Windows 7, it's
got to have a driver to access the disk, and it doesn't.
It's basically the same problem as trying to dual boot Windows XP in a
VHD...
Bob Comer Microsoft MVP -- Hyper-V

How to compile only prism-es2 native on windows...

Hi,
I only desire to compile the JavaFX prism-es2 native for windows.
(Because the prism-es2.dll is not included in JDK 8).
The information I have from OpenJFX is:
https://wiki.openjdk.java.net/display/OpenJFX/Building+OpenJFX
(Not very usefull).
https://wiki.openjdk.java.net/display/Nashorn/Building+Nashorn
http://hg.openjdk.java.net/jdk8/build/raw-file/tip/README-builds.html
I do not wish to recompile the JDK 8 in totality !!!!!!
Only the part Prism-es2 native... How I can do that ???
I had taken the source code from:
http://hg.openjdk.java.net/openjfx/8/master/rt
Thank you ....

-How to compile OpenJFX ?
I try several ways (JDK1.6, JDK1.7, ...) to compile and all time,
I receive a lot of errors.
(Missing com.sun.javafx.font,
I do not found these packages: com.sun.javafx.font and com.sun.javafx.text.
      (possibly auto-generated)
And the use of ant with: -Dbuild.compiler=javac1.7 change absolutely nothing...
=>This is how finally I compile sucessfully. (After one week of different tests !!!)
+First, I follow the instructions of:
https://wikis.oracle.com/display/OpenJDK/Building+OpenJFX
http://hg.openjdk.java.net/jdk7/build/raw-file/tip/README-builds.html#windows
Take the source code:
http://hg.openjdk.java.net/openjfx/8/master
http://hg.openjdk.java.net/openjfx/8/master/rt
http://hg.openjdk.java.net/openjfx/8/master/tests
+From OpenJDK)
-Basic Windows Check List:    (I follow all the instructions).
1. Install the CYGWIN product.                          <--Done (The 64 bits version)
2. Install the Bootstrap JDK, set ALT_BOOTDIR.          <--Done (JDK 1.8)
3. Optional Import JDK, set ALT_JDK_IMPORT_PATH.    <--Not done(Not necessary for us)
4. Install the Microsoft Visual Studio Compilers). <--Done
   Visual Studio 2010 Express (Visual C++/C) installed.
   Windows SDK 7.1 installed (To build 64 bits). ==>WindowsSdkDir added.
   VS100COMNTOOLS is defined.
5. Setup all environment variables for compilers (see compilers).   <--Done (64 bits)
    ...\Common7\Tools\vsvars32.bat not used because
        ...\VC\bin\amd64\vcvars64.bat is used for 64 bits.
   We set all manually for us)
    set CYGWIN=C:\ProgramFiles\cygwin64\bin
    set VSINSTALLDIR=C:\ProgramFiles(x86)\Microsoft_Visual_Studio10.0
    set WindowsSdkDir=C:\ProgramFiles\Microsoft_SDKs\Windows\v7.1
    set PATH=%VSINSTALLDIR%\vc\bin\amd64;%VSINSTALLDIR%\Common7\IDE;%WindowsSdkDir%\bin;%CYGWIN%;%PATH%
    set INCLUDE=%VSINSTALLDIR%\vc\include;%WindowsSdkDir%\include
    set LIB=%VSINSTALLDIR%\vc\lib\amd64;%WindowsSdkDir%\lib\x64
6. Install Microsoft DirectX SDK.                         <--Done. (June 2010 version)
   (From: http://www.microsoft.com/en-ca/download/details.aspx?id=6812)
   set DXSDK_DIR=C:\ProgramFiles(x86)\MicrosoftDirectX_SDK(June2010)
   set INCLUDE=%INCLUDE%;%DXSDK_DIR%\Include;
   set LIB=%LIB%;%DXSDK_DIR%\Lib\x64;
7. Install Ant 1.7.1 or newer, make sure it is in your PATH and set ANT_HOME. <--Done.
   (The version 1.9.1)
And also)
-So it's important that the Visual Studio paths in PATH preceed the CYGWIN path /usr/bin.
      (due to link.exe)        <--Done
-And for the: MSVCR100.DLL   <--Done
   set ALT_MSVCRNN_DLL_PATH=%VSINSTALLDIR%\Common7\Packages\Debugger\X64 (This is the only place found)
   set LIB=%LIB%;%ALT_MSVCRNN_DLL_PATH%;
+From OpenJFX)
I follow all the instructions...
But for antlr, I use the version from: http://www.antlr3.org/download/
-Change inside build-src\genVSproperties.bat
to include my zzz_batch1\c_settings1.bat
c_settings1.bat)
REM ------------------------------------------------------------------------
REM PATCH ZZZ....Visual Studio 2010...
Rem Must be called by master\build-src\genVSproperties.bat
REM Result is inside vs.properties
REM No .NET\Framework...
REM These lines will be installation-dependent.
set CYGWIN=C:\ProgramFiles\cygwin64\bin
set VSINSTALLDIR=C:\ProgramFiles(x86)\Microsoft_Visual_Studio10.0
set WindowsSdkDir=C:\ProgramFiles\Microsoft_SDKs\Windows\v7.1
set DXSDK=C:\ProgramFiles(x86)\MicrosoftDirectX_SDK(June2010)
set ALT_MSVCRNN_DLL_PATH=%VSINSTALLDIR%\Common7\Packages\Debugger\X64
REM The following should be largely installation-independent.
set VCINSTALLDIR=%VSINSTALLDIR%\VC
REM
set INCLUDE=%VCINSTALLDIR%\include;%WindowsSdkDir%\include;%DXSDK%\Include;%INCLUDE%
set LIB=%VCINSTALLDIR%\lib\amd64;%WindowsSdkDir%\lib\x64;%DXSDK%\Lib\x64;%ALT_MSVCRNN_DLL_PATH%;%LIB%
set LIBPATH=%VCINSTALLDIR%\lib;%LIBPATH%
REM
set DEVENVDIR=%VSINSTALLDIR%\Common7\IDE
set DEVENVCMD=%DEVENVDIR%\VCExpress.exe
REM
set PATH=%VCINSTALLDIR%\bin\amd64;%VSINSTALLDIR%\Common7\IDE;%WindowsSdkDir%\bin;%CYGWIN%;%PATH%
REM echo "%DEVENVDIR%" %DEVENVDIR%
REM ------------------------------------------------------------------------
genVSproperties.bat)
if not exist "%DEVENVCMD%" set DEVENVCMD=%DEVENVDIR%\VCExpress.exe
REM ZZZ Patch...
call ..\zzz_batch1\c_settings1.bat
REM Echo out a properties file
Now I receive a lot of errors at the compilation:
jar:
    [mkdir] Created dir: C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-quantum\build\classes
    [javac] Compiling 43 source files to C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-quantum\build\classes
    [javac] C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-quantum\src\com\sun\javafx\tk\quantum\SceneState.java:49: error: constructor PresentableState in class PresentableState cannot be applied to given types;
    [javac]         super();
    [javac]         ^
    [javac]   required: View
etc ...
After search, I found that the compilation process, use the file:
   C:\ProgramFiles\Java\jdk1.8.0\jre\lib\ext\jfxrt.jar
   I rename it: jfxrt.jarXXX
   (I don't know how this jar is included after some searchs).
   After the C:\zgroup1\userbase1\javafx1\open-jfx\master\artifacts\sdk\rt\lib\ext\jfxrt.jar
   causes the same errors. I create an empty jar named jfxrt.jar.
   Now I can recompile all, (After a clean)
   I clean all, I recompile but I have the another errors.
I change the rt\build.xml:
       <condition property="include.ogl">
          <istrue value="${isWindows}"/>
        </condition>
     
    <target name="jar" depends="init">
        <ant antfile="${rt.root.dir}/javafx-accessible/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-common/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-logging/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/glass/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-beans/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-util-converter/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-anim/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-geom/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/pisces/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/decora-compiler/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/decora-runtime/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-sg-common/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-ui-common/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-concurrent/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-util/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-common/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-ui-quantum/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-sg-prism/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-embed-swing/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-ui-controls/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-ui-charts/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/decora-prism/build.xml" target="jar" inheritAll="false"/>
        <antcall target="jar-decora-d3d"/>
        <antcall target="jar-decora-es2"/>
        <ant antfile="${rt.root.dir}/decora-jsw/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/decora-prism-sw/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/decora-prism-ps/build.xml" target="jar" inheritAll="false"/>
        <antcall target="jar-decora-sse"/>
        <ant antfile="${rt.root.dir}/prism-util/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-common/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-j2d/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-ps/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/prism-null/build.xml" target="jar" inheritAll="false"/>
        <antcall target="jar-prism-sw"/>
        <antcall target="jar-prism-d3d"/>
        <antcall target="jar-prism-es2-all"/>
        <ant antfile="${rt.root.dir}/javafx-beans-dt/build.xml" target="jar" inheritAll="false"/>
        <ant antfile="${rt.root.dir}/javafx-fxml/build.xml" target="jar" inheritAll="false"/>
        <antcall target="jar-javafx-android"/>
        <antcall target="jar-javafx-embed-swt"/>
        <ant antfile="${rt.root.dir}/javafx-builders/build.xml" target="jar" inheritAll="false"/>
    </target>
I recompile and now:
jar:
    [mkdir] Created dir: C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-common\build\classes
    [javac] Compiling 471 source files to C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-common\build\classes
    [javac] C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\javafx-ui-common\src\com\sun\webkit\dom\JSObject.java:30: error: cannot find symbol
    [javac] import netscape.javascript.JSException;
    [javac]                           ^
    [javac]   symbol:   class JSException
--->Compile webview (and webview needs another packages, circular problems)...
Recompile all is not really possible due to intersecting packages...
I change rt\glass\glass\build.xml because missing)
    <property name="jfx.accessible.dir" value="${rt.dist.root.dir}/javafx-accessible"/>
    <property name="jfx.accessible.jar" value="${jfx.accessible.dir}/dist/javafx-accessible.jar"/>
Now I recompile, I have errors but now I understand something.
When master\artifacts\sdk\rt\lib\ext\jfxrt.jar is the empty version, I compile at a certain point.
I copy the C:\ProgramFiles\Java\jdk1.8.0\jre\lib\ext\jfxrt.jar to master\artifacts\sdk\rt\lib\ext
and I able to go to another point. When errors, I take the empty version and alternatively I pass
from the empty to full version.
Finally I compile all and:
dist:
     [echo] Creating merged openjfxrt.jar file
    [mkdir] Created dir: C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\dist\lib
      [jar] Building jar: C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\dist\lib\openjfxrt.jar
     [echo] Copying binaries
    [mkdir] Created dir: C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\dist\bin
     [copy] Copying 1 file to C:\zgroup1\userbase1\javafx1\open-jfx\master\rt\dist\bin
BUILD SUCCESSFUL
I have my ES2 (Decora,Prism) part compiled with prism-es2.dll inside prism-es2-native.jar
Now I will test all !!!

Get Native Java Window using Java Access Bridge 2.0.1 & Java 1.6 and above

I want to get the native java window (Like Java Monkey Application and Java Ferret Application) using java only, for that I tried different ways/options but unable to get the native java window and perform actions on that.
It would be really great if you could guide me for that. I am still unable to start the Java Access Bridge.
Please let me know the steps to get native java window using Java Access bridge and JDK 1.6.20.
Also Note that, As per your previous suggestion, I tried to search and call initializeAccessBridge() and shutdownAccessBridge(), But unable to succeed it. I did not find such method in Accessbridge.jar.
Please help me out.
Best Regards

You might want to check out this thread:
Java Access Bridge and JRE 1.6
If you have Java 6, you'll need to manually install Java Access Bridge 2.0.1. The JAB 2.0.2 installer for Java 6 is also available as a beta:
http://jdk6.java.net/6uNea.html

Cisco ISE. Windows Native Supplicant on VMware

HOw to configure VM Ware host, with WIndows 7 guest workstation to do lab test of 802.1x authentication.
I have created workstation and linked to the port on UCS, port connects to 3850 switch on access mode. how to test it? having problems with 802.1x authentication.

Thank you guys.. .I got it up and running... Not sure what the problem was..
Another problem, do you know if there is a why to run anyconnect authentication on VM Windows 7, that is connected to a trunk port on the switch. Meaning this VM host will have example of 10 servers and 5 workstations windows 7. Multiple VLANs connected to a trunk port.. Can i run 802.1x auth on 2 out of my 5 workstations??
Should i install nexus 1000v?
THanks

ISE with per-windows 2000 domain

Hi
I am experiencing a problem with AD authentication.
I have joined the ISE appliance to the windows AD and I can browse the groups and attributes.
But the problem I am experincing is that the users logon to the domain using the pre-windows 2000 domain name.
FQDN format : ab.cdef.com - ISE is joined to this
pre-windows 2000 name : abcd - Users logon with this
So wen the users authenticate I get the following error : 22056 Subject not found in the applicable identity store.
Also tried to logon with [email protected] with no luck.
Does someone have any suggestions?
Thanks

The 802.11 Mac Layer is a bit longer than the ethernet mac layer. This sometimes cause problem with domain login because they are done using UDP by default. The frame are sometime drop. To test if this is your problem, I recomand changing the MTU on the 2000server(DC) and the host to something lesser than the actuel MTU on the interface. (configure the DC and host @1300 leaving the network @1500)
A Windows 2003 server as a default mtu of 13?? something to get around this problem. I usaully tell my users to install the cisco vpn client if they want to use domain in wireless because the installation of this client lower the MTU of every interface to 1300.
Another path you can look into is forcing kerberos to use TCP insted of UDP. (look on MS TechNet for method)

Cisco ISE to check Windows Firewall is enabled or not in Posture Requirement.

I have already a running setup for wireless employees. Everything is working fine. Wireless Employees authenticate by AD through ISE. URL redirection is working fine. Posture requirements to check Hotfixs & AV installation & definition is working fine. Now I have new requirement to check whether Window firewall is enabled or not, if not then put the users in temporary access & do the remediation, if failed then put the user in noncompliant.
I want to know under which option i can create Window Firewall requirement.
Thanks

Windows Firewall in Windows XP creates a registry key
Registry Key:
HKLM\SYSTEM\ControlSet001\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile
Registry Value:
EnableFirewall
If the XP Firewall is on the Value will be = to “1”
The following link shows how to tell if firewalls of different brands are running
http://cisconac.blogspot.com/2007/05/custom-checks-personal-firewall.html
So, the ISE config will be something like the following picture. Please rate if it helps

Canvias Paint to native C++ (Windows)

Hi all,
I'm programming an aplication that needs to access a graphic library that I already have in a DLL. I've read about the possibility to use a Canvas derived class and override the paint method calling to the Native DLL.
My question is: how to deal with the Native code if what I receive is this:
Java code:
public native void paint(Graphics g);
C++ generated code:
JNIEXPORT void JNICALL Java_jnitest2_JNILink_paint(JNIEnv *jenv, jobject jobj, jobject jobj2)
What do I have to do to link the jobject to a Windows Graphics component?
Thanks,
Carles.

Check jawt.h file in the include subdirectory of your JDK. It contains sample of native drawing to the canvas.

Moving a native (external) window in Xorg

I am trying to figure out how I can move a window using the JNI and Xorg. I know the title of the window I am trying to move but I can't find any documentation about finding the window handle or moving the window.
Can anyone help me out (some pointers to start with would be great).

X isn't all that easy to trudge through. Here's what you want though:
http://tronche.com/gui/x/xlib/
http://tronche.com/gui/x/xlib/window/XMoveWindow.html
Assuming you have used JNI before (if not, you'll probably need a tutorial or two to get started):
#include "/usr/include/X11/Xlib.h"
Display *display = XOpenDisplay(NULL);
Window wnd;
JNIEXPORT etc. etc. etc. {
    if(display == NULL){
        printf("Could not open display\n");
        return;
    wnd = ... // get the window you want
    XMoveWindow(...);
    return;
}Note that when you compile it, you need to link it to the X11 library. Something like this:
g++ -lX11 -shared -o libwhatever.so -I/usr/lib/jvm/java-6-sun-1.6.0.00/include/ -I/usr/lib/jvm/java-6-sun-1.6.0.00/include/linux whatever.cpp
Keep your eye on [http://codequirks.blogspot.com/|http://codequirks.blogspot.com/] - probably going to be some posts about using X with JNI soon.
Edited by: sprizor on Jun 22, 2008 11:40 AM
Edited by: sprizor on Jun 23, 2008 8:09 AM

Take screenshot in native mac/windows systems

Hi, I know it is possible to take a screenshot of an AIR
window, but is it possible to take a screenshot of a windows/mac
desktop?
If it is not possible to do that, is this a feature to add in
the current roadmap?
Thanks,
Pau

No it is not possible.
To make a feature request go to
http://www.adobe.com/go/wish
(the more people who request a feature, the higher priority a
feature will receive in future development plans).

Native logic windows (like 'Go To') have a SLOW 'spring' animation

I'm new to Mountain Lion, and the first thing I've noticed while trying to get any work done, is hitting "Go To" to open the "GO To Position" window results in the window opening with this really silly spring/zoom effect. I've tried everything I can think of, and I can't get rid of it.
I move FAST in Logic, and I'm used to not pausing after hitting my 'go to' key. I'll hit "goto" and then immediate the Time Code or Bar number.
However, now, my input doesn't take because I'm doing it while that spring/zoom thing is happening.
I've tried disabling the 'spring folders' preference in Finder, and removed "Animate opening info panels and desktop icons" via TinkerTool.
Can anyone help me solve this problem? It's a major groovebuster.

Yet another reason not to move to the ugly ML beast.
Sorry to be of no help, the "Go To" key command windows open lightning fast (as you know) in Snow Leopard.
I wonder if it's yet another symptom of the graphics slow down problem that has plagued other users.The one where Logic freezes if a plugin with an animated graphic interface is opened. (Logic's channel eq in hi-res analyze mode)

BOYD ISE Native Supplicant Windows 7

Similar Messages

Maybe you are looking for