BP archiving-issue
Hi Friends,
i have followed the whole process and made necessary settings for BP archiving.
1.set the archive flag in BP's status tab.
2.created Logical path and file name and physical file and path name.
3.created variant(Bp-archive) for CRM_BUPA_DA_SELECTIONS and activated
4.I have created a variant for the program CRM_BUPA_DA_SELECTIONS and activated it.
5.Activited the infostructure CA_BUPA_ALL.
After selecting CA_BUPA in transaction SARA, i have clicked check and delete.
after clicking on check ,i could not get the variant i have created from F4.If i enter manually and click on execute it is displaying that the variant is not created for ARCDEL_VERIFY_PARA.
where i have to select the variant and execute archiving.Pls help
Hi,
while archiving (check and delete) through SARA transaction, you need to mention the BP number (or range) in the Check/Delete selection screen and save as variant and execute. Once the Check is done then those BP(s) are ready for deletion. Then you need to run the Deletion job.
If you need info further plz let me know.
Regards,
Kishore K Vemula
Similar Messages
-
MM_EBAN Archiving Issue
Dear All,
Whilst trying archive purchase requisitions via the archiving object MM_EBAN i get the following error in my production system
Job started
Step 001 started (program RM06BW47, variant 26PAC_3, user ID SHABEENB)
Archiving session 000233 is being created
Read Purchase Requisitions
Logical file name or logical path name incorrectly defined
Operating system message: No such file or directory
Archive file Z:\Archive_Data\MM_10260_103128.ARCH.ARCHIVE cannot be opened for write program
Job cancelled after system exception ERROR_MESSAGE
There is no consistency in this error, at time the archiving happens successfully and most often than not the above problem occurs. What could be the problem, as for the process below are my step by step procedure.
1. Selecting archiving object : MM_EBAN
2. Select Preproc (Maintain a new variant, specify the purchase requisitions that need to be archived, processing options - production mode, detail log : complete --- save (leave value maintenance - YES)
3. Select Write (Maintain a new variant, specify the purchase requisitions that need to be archived, processing options - production mode untick delete with test variant, detail log : complete --- save (leave value maintenance - YES)
At this stage i identified sometimes the archive file gets created in our specified path and sometimes it doesnt and we get the error mentioned above)
4. Select Delete (Archive selection - specify the file)
As for the customizing settings
Archiving object specific customizing
we have maintained the following
1. Maintained settings for delete program (both test and production mode variant)
Delete jobs
1. Start automatically
place file in storage system (start automatically)
sequence
delete before storing
Please do help me in resolving the above issue,
Thanks & Regards
Shabeen BuharyPost issue to SAP
-
Hi,
THe file adapter archives the file, it doesn't save the entire contents of the file in the archive folder, but saves the first recordset (row) only in XML format. Did any body face similar issue, and what's the resolution to archive the contents of the file, the way it was sent.
Thanks
PandariHi Anil,
Refer Archiving concepts in below links.
http://help.sap.com/saphelp_nw73/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm?frameset=/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
http://scn.sap.com/docs/DOC-35572
Warm Regards,
DNK Siddhardha. -
File adapter - Archive issue with adapter module
Hi All,
I have 2 issues here. We are currently using PI 7.11 EHp1 SP02.
1. Arhival with "add time stamp" wont work. It just gives us an error message saying simpledate format exception.
I have gone through the OSS note 1265534 and thought this will resolve the issue. But our BASIS team believes this note is only applicable for PI 7.1 SP01. Can you one using PI 7.11 SP02 comment on this?
Note: Archive option with out add time stamp works fine.
2. When I use adapter module in my sender file configuration, the archive option itself does not work. Read the official SAP help which says "To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor."
So the question here is, how do we make the error permanent? The only way to throw error from adapter module is using the ModuleException. It has 4 different constructors. I have used both
ModuleException me = new ModuleException ("My error Msg"); and
Module Exception me1 = new ModuleException ("Error String", new Throwable("My error Msg");
In both the cases, the archival wont happen.
Any ideas welcome.
Thanks
JaiHi,
I am using NFS protocol here not FTP. Sorry I dint mention that earlier.
Thanks
Jai
Edited by: Jaishankar on Apr 1, 2010 9:55 AM
Edited by: Jaishankar on Apr 6, 2010 11:10 AM -
SD Billing Document Archive Issue
Hi Guru,
I have encountered an issue related SD Billing Document Archive.
The issue is like below :
In our system there is provision that we can Archive SD through ""Services For Object"" option in VF02.
Generally the way we archive it is as below steps:
1. Open a particular billing document through VF02 which need to be archive.
2. Then we click on ""Pricing Condition Header"" -> It takes you to the pricing detail screen with "Output" button in the application tool bar.
3. Then we click on "Output" button -> It takes you to the screen throuh which o/p of the billing document is configured.
4. We set the following parameters for archiving
output type = ZTR1
Medium = Printing output.
Function = BP
Partner = desired partner number
5. Using ""Further Data" button we set the Dispatch time to "4. Send Immediately (when saving the application)""
6. Using ""Communication method" we set the Logical destination to LP01 and storage mode to "3.Print and archive" and Print Immediately option tick marked
7. Press save button created a single spool in Sp01 with spool number.
In spool there is saving only one spool with only 1 spool request type. (say the print preview of spool request type contains 3 pages in 1 spool request)
But when i am viewing the archiving document through vf03/vf02 in ""Services For Object"" I am able to find for the same spool 3 separate pages is in archived document.
when i tried to find out the reason by debugging setting the breakpoint in the driver prog configured in NACE. the debugging cursor is not stopping there...
So Guru what might be the possible reason because of which 3 separate pages in being archived instead of 1 and the cursor is not getting stopped at the o/p type's driver prog.
Please provide some guideline so that I can resolve this..
Thanks & regards
Saifur RahamanHi ,
any update...I am still waiting for the feedback
Thanks & regards
Saifur Rahaman
Moderator message: participation here is voluntary, nobody is obliged to reply, be patient.
Edited by: Thomas Zloch on Dec 7, 2010 11:38 AM -
Solaris 9 U7 (2004/09) MultiLayered Flash Archive issue + solution ?
In Solaris 9 Update 7 (2004/09) the multilayered flash archive installation feature is broken.
I think that this is a known issue:
4945516 Failure of multi-layered archive with Solaris 9 4/03 on Postdeployment process
I manage to flash my archives by changing the following statement found at line 24 of the file
../Solaris_9/Tools/Boot/usr/lib/flash/postdeployment_processing
from
if [ ! -L $FLASH_ROOT/etc/rc2.d/S98flash_reboot ] ; then
to
if [ -L $FLASH_ROOT/etc/rc2.d/S98flash_reboot ] ; then
This issue is addressed in the patch 113434-22
113434-22/SUNWinst/reloc/usr/lib/flash/postdeployment_processing
But the if statement is not the good one.
Is this correct ?
Coco D.Ideas.. Hmm, none which seems that correct, but you could try some things.
If it gets the wrong IP that could explain why it fails to copy the sysidcfg file.
First you could try and do a snoop on the ethernet address;
snoop ether 0:3:ba:14:c6:cd
(you could also try the -v flag to increase the verbosity).
The things you should look for are arp/rarp requests, the jumpstart client will use arp/rarp to determine its IP address, snoop will show you which server that responds, and what address it gets, futher more its a good idea to verify that the response to the bootparams requests comes from the correct server.
Of course there might be other oddnesses as well.
Was the data you provided extracts? If it was you should check the /etc/ethers and /etc/bootparams for duplicates entries, so there are no other occourances of the clients ehternet address in /etc/ethers, and no bogus entries starting with * or the same hostname in /etc/bootparams.
If you added the client manually you could always try and use the Tools/rm_install_client and Tools/add_install_client scripts to add it again, these script sometimes detect problems with the configuration.
Lastly you didn't show us your /etc/nsswitch.conf file, but i assume that it has "files" first for the ethers, hosts and bootparams entries?
Good luck
//Magnus -
Lms 4.2 , Config Archival issue
Hi
Please have a look to the below image , what is the reason for this failed Archival and how to solve this issue
thanks
IbrahimThe 25 success means LMS is working fine.
The 277 failed means LMS has problems communicating with these devices.
Causes can be:
Bad credentials
ACL's on the device not permitting LMS ip address to talk to the device.
protocols (TELNET, SSH, RCP, SCP) not running on the devices.
firewalls or ACL's on routers not permitting LMS protocols.
Pick a single device, test the protocols comming from the server to the device, test credentials.
Cheers,
Michel -
Business Partner Archiving Issue.
Hi folks!
We are using CRM 5.0 system. I want to archive one BP, for this I have used BUPA_REL_DA Tcode. when I am trying with this Tcode it is throughing the Error message - Business Partners is used in Business transaction.
Then I have opened the BP and went to relation ship tab , I just tried to delete the relation ship then it is showing BP is already used in Org-Model. Then I went to PPOMA_CRM and opened the Employee.
Now the issue, when I am trying to remove the entire BP, Then I am clicking on that delete button it is showing me in disable mode. Please let me know how can I archive the BP?
Regards,
Anil.
Edited by: Anil kumar on Jul 19, 2010 4:08 PMHi Garcia!
Thanks for your response.
Could you please tell me, How can I get all the business transactions of this BP to archive. Is there any Report to get all the business transactions related to this BP.
If BP is still used in a partner function of an transaction that I have in my system? How can I see, Please provide me the path.
I think it wont work,,, Some business transactions may usefull for client. How can we propose this option to them? My story is client created new BP so they want to archive the old one.
Sorry for questioning again and again,, Is there any other possibility to archieve the old one?
Regards,
Anil.
Edited by: Anil kumar on Jul 22, 2010 6:34 PM -
Archiver Issue| Automatic replication process | Archiver thread blocking
Hi,
Recently, we are facing a strange issue with Archiver auto replication process. Sometime, archiver thread is blocking and auto replication is stalling. We observed this issue after we apply latest OUCM patches downloded from Oracle support site.
As an work around, we are doing UCM restart.
Anybody got this kind off issue? We are following this up with Oracle in parallel. Any help regarding this is highly appreciated.
Gowtham JWhat version/patch set/core update of UCM are you using?
Jonathan
http://redstonecontentsolutions.com
http://corecontentonly.com -
Archiving issue in material master
Hi
I am trying to delete the material master through SARA t.code
1.enter the archiving object MM_MATNR
2. then click write button enter the varient name(zarc..)click maintain
then enter the materials ...tick the radio button production mode..save the varent
3.then come back click the starttime click time immediatly
4.come back click spool parameters
5. then comeback click deletion button then enter user name
6. then click select archive files..her popupscreen displayed but there are no files.....
i have faced issue thre ..so next step how can i proceed..pls guide me any one...
when i am go to job overview ... my job ststus is finished and cancelled ..it has ahoes both status ...than i goto joblogs..error displas like ...........
Virus scan profile /SARC/ARCHIVING_ADK does not exist
Message no. VSCAN032
Diagnosis
The virus scan profile /SARC/ARCHIVING_ADK was requested, but is not entered in the configuration of the virus scan profiles.
System Response
The virus scan profile cannot be retrieved.
Procedure for System Administration
Check the configuration of the virus scan profiles.
regards
SesidharHI,
ADK-based archiving relies on two main elements, which are used for the development and administration of archiving solutions: Archive Development Kit (ADK) and Archive Administration (transaction SARA).
ADK and SARA are part of the standard SAP Web Application Server. ADK is the Application Programming Interface used by the applications to develop archiving solutions, while Archive Administration (transaction SARA) is used mainly by data archiving administrators to manage all tasks related to data archiving, including job scheduling and management, writing, reading and deletion of data, as well as Customizing.
Pls check the link:http://help.sap.com/erp2005_ehp_03/helpdata/EN/ed/18cc38e6df4741a264bddcd4f98ae2/frameset.htm
This issue is to be solved with the ABAP consultant, dealing with the Web based applicaitions...
Regards
Priyanka.P -
Archiving Issue!!!! Need an urgent reply
My DB size is (62 GB) but the problem create 80 to 90 archiving on daily
basis & one day total archiving size of the day is 30GB.Some times archiving size goes to
49 or 50 GB.
The thing I can't understand is that there is not much enough DML & DDL
perform in this DB then how this DB creates a lot of archiving.
Plz help me regarding this issue....Thanks in advanced...Any chance you know the version number (3+ decimal places) of your database?
If it is missing some patches ... apply them and ask again.
What is in your alert log?
PS: Your question has nothing to do with SQL and PL/SQL and likely should have been posted in the General Database forum.
You might want to consider, in the future, posting where your topic is ON topic. -
Material Master Archiving Issue
Hi,
I have Issue with Material Master archiving. I got an error message" MARD:Reservation /Dependent requirement exist.
I have checked in MB24-Open reservations. All Reservations are closed. No stock existed. No Transfer requirements & No stock in transit.
I ran MBVR also.
How to solve thsi problem.
Regards,
Sridhar.Hi Sridhar,
You may refer to note [900537 |https://websmp210.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=900537]for details:
Error W4017 - Reservation/Dependent requirements exist:
This message indicates that some reservations exist for the material you
are trying to archive. You should be able to see the existing
reservations using table RESB. Firstly, you must archive the document
that caused the reservation to be created, for example Production Orders
then you must archive the reservations themselves. Afterwards, it should
be possible to archive the material.
Note 30781 may assist if you identify that these requirements stem from
purchase requisitions.
Hope it helps.
Thanks and regards,
Polly -
Exchange 2010 SP3 Update Rollup 2 (KB2866475) personal archive issue
I’m wondering if anyone else has run across this issue: We use the Exchange personal online archives, and after installing the rollup, anyone with full access to someone else’s mailbox had all the personal archive names changed to the
same name. As an example, if I had full access to Joe’s mailbox, then the name of Joe’s personal archive, as shown on my Outlook 2010, would display “Archive – Paul@company” rather than “Personal Archive – Joe”. Uninstalling the rollup put
everything back to normal. So, has anyone else seen this?
Thanks.Hi,
Have you checked it via OWA? Is it the same with Outlook 2010?
If the issue doesn’t occur when you use OWA, I recommend you recreate Outlook profile to check the result.
If OWA also has the issue, please make sure whether all users are impacted by the issue.
Here is a related thread below for your reference, but I cannot find related description for the issue that the Update Rollup 2 for Exchange Server 2010 SP3 resolves.
http://social.msdn.microsoft.com/Forums/exchange/en-US/45814f93-30a7-4cad-ae4d-5c9d1f4d0a08/bug-in-update-rollup-1-for-exchange-server-2010-sp3-breaks-online-archive-names
Description of Update Rollup 2 for Exchange Server 2010 SP3
Best regards,
Belinda -
BW Archiving issue - Data not being picked up
Hi,
I am using ADK Archiving to archive a cubes data ( to application server files). The config is working perfectly in DEV however in QA I get "0 data records copied in volumes of 0 KB" even though data is present for the selection criteria.
I do not see any authorization issue or other error in job log... Anyone seen this issue before ? Please advise.
ThanksHello,
Are the requests compressed? In 700, the data in the infocube must be compressed or it cannot be archived.
Best Regards,
Vincent -
Hi,
Below is deatils of an issue I am having with my 2900 routers, which I cannot backup (taken from dcmaservice.log).
All other devices are working fine.
Is the a bug fix ?
Thanks
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.ConfigManager,updateArchive,1943,Sync Archive for 1 devices - Sync Archive
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.ConfigManager,updateArchive,1957,Number of devices in fetch Q = 0
[ Wed Jul 04 10:28:37 BST 2012 ],WARN ,[Thread-5],com.cisco.nm.rmeng.util.DCRWrapperAPIs,getResultFromQuery,3315,SQLException occurred as connection closed. Re-connecting to DB...
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.CfgThreadManager,compareDeviceWithDevicesinRunningThreads,59,inside compareDeviceWithDevicesinRunningThreads method
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.CfgThreadManager,compareDeviceWithDevicesinRunningThreads,60,Total running threads:5
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.ConfigManager,updateArchiveIfRequired,2057,Compared the device with running thread devices.Adding to Fetch Q
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-5],com.cisco.nm.rmeng.dcma.configmanager.CfgThreadManager,triggerConfigFetch,52,#### Start of Sweep Wed Jul 04 10:28:37 BST 2012 ####
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.xms.xdi.pkgs.SharedDcmaGeneric.transport.GenericConfigOperator,fetchConfig,70,I am here
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.xms.xdi.pkgs.SharedDcmaGeneric.transport.GenericCliOperator,registerPlatform,95,Calling new GenericPlatform()
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.xms.xdi.pkgs.SharedDcmaGeneric.transport.GenericPlatform,<init>,23,setting GP user and pass prompts
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.xms.xdi.pkgs.SharedDcmaGeneric.transport.GenericPlatform,<init>,30,registering generic platform
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.xms.xdi.pkgs.SharedDcmaGeneric.transport.GenericPlatform,<init>,32,registered generic platform
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1537,Inside RMEDeviceContext's getCmdSvc ....
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1547,Protocol and Platforms passed = SSH , GEN
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1571,Iam inside ssh ....
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1573,Initial time_out : 0
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1583,Computed time_out : 36
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getCmdSvc,1599,After computing time_out : 36
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshCmdSvc,1637,inside getSshCmdSvc with timeout : 36000
[ Wed Jul 04 10:28:37 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshProtocols,1743,Inside getsshprotocols with time out : 36000
[ Wed Jul 04 10:28:38 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext,getSshCmdSvc,1651,SSH2 is running
[ Wed Jul 04 10:28:39 BST 2012 ],ERROR,[Thread-384],com.cisco.nm.xms.xdi.transport.cmdsvc.LogAdapter,error,19,Unknown authentication method: keyboard-interactive
[ Wed Jul 04 10:28:43 BST 2012 ],ERROR,[Thread-384],com.cisco.nm.rmeng.dcma.configmanager.ConfigManager,updateArchiveForDevice,1357,PRIMARY RUNNING Config fetch Failed for MIL-R-002
[ Wed Jul 04 10:28:43 BST 2012 ],INFO ,[Thread-384],com.cisco.nm.rmeng.dcma.configmanager.ConfigManager,writePerDeviceResultFile,2445,Serializing the Device Result = D:/CISCOW~2/files\/rme/jobs\ArchiveMgmt\1108/31.device
[ Wed Jul 04 10:28:53 BST 2012 ],ERROR,[Thread-384],com.cisco.nm.rmeng.dcma.utils.ArchiveUtils,getDeviceReachabilityStatus,461,Telnet/SSH may be disabled on 172.31.255.25
[ Wed Jul 04 10:28:53 BST 2012 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.configmanager.CfgThreadManager,run,99,#### End of Sweep Wed Jul 04 10:28:53 BST 2012 ####Hi,
I am still loking at the issue with no resolution.
I am trying Telnet, which all correctly configured and working (with Tacacs and have looked at the Taccas...ini file)
But still my archive jobs fail on LMS 3.2 for 2900 Routers
SSH - is beacuse of the client used on LMS has the "keyboard-interactive" mode setting set in its client cfg, which as it's a Java ssh client , it is not configuable and therefore needs a fix.
Telnet - seems to failing with authentication or prompt issues, with Tacacs enabled.
I have seen no resolutions to these issue.
Any ideas
Thanks -
Hello Friends,
I am trying to archive Purchase Orders using object MM_EKKO through tcode SARA.However , in the write archive job which is
executed in the background i am getting a message 'GR not planned' in the spool output for the PO which i have selected; although GR scenario is not applicable in my case , we directly create an invoice.
Hope to get some pointers on successfully archiving such POs.
Thanks,
APHi Abhi
SAP has some conditions based on which the deletability on a purchase order can be set while archiving using MM_EKKO.
Please refer to the link http://help.sap.com/saphelp_rc10/helpdata/en/42/ed9aa1cc583268e10000000a1553f6/content.htm
If the GR is not equal to the GI then a purchase order cannot be archived.
GJ
Maybe you are looking for
-
Please can you clarify this and give me an example ?
I want to sign up with iTunes connect to publish my books, but there is this section of the contract which I didn't get it is not clear will you please clarify it and give me an example. "Apple shall be entitled to a commission, in accordance with th
-
BAPI_SALESORDER_CREATEFROMDAT2 for creating sales orders with configurable
Hi All, I want to create sales order with a material which in turn triggers a configurable network order. I am using the following BAPI : BAPI_SALESORDER_CREATEFROMDAT2. After reading the "[Variant Configuration (LO-VC)|http://help.sap.com/printdocu/
-
The titles are not saved when i quit
After quiting FCPX the titles i have made are not saved for next time i open a project. Some titles are saved sometime?
-
Putting a rollover gif into an iweb template
hi, i am using iWeb for the first time and have created my website using a template but i want to add a gif to the page so when people roll over it, the picture changes. i have made the gif in photoshop and image ready and can only export it as an ht
-
Convert system time into User local time.
Hi, How to convert System time into User Local time. Are there any FMs available. Regards, Kiran