BP &C upgrade to version 7 failing, server configuration file missing.
Anyone,
When I run the version 7 Startup.exe, the only options are to Prepare or Other. I think the server configuration file is missing. Is there a way to create/recreate one without using the insight export feature (that appset is not installed or enabled).
Thanks in advance.
Your flame is not at all helpful. After digging into the problem for a couple hours I was able to discover EXACTLY what had happened.
Thank you
For everyone else, here is what the upgrade has done:
Under the "iTunes\iTunes Music" folder there used to be a "Downloads" folder that was deleted by the 7.0 upgrade.
It looks like this folder was used for the recovery of failed downloads, but the previous versions of iTunes were not managing this folder very well. There were several folders containing just 1 media file. Most of the media files were 0 bytes long, except for the 2 files that I had lost during the upgrade. Apparently, iTunes was using these 2 files. The upgrade to version 7.0 caused this folder to be deleted; thus the links were broken. Anyone else who had a failed download, in particular a video download, may have the same issue.
Similar Messages
-
How and what to configure in the server configuration files of Tomcat Web ?
Hi,
I am using TCP/IP socket connection pooling in my project. For pooling I have written code, I want once the tomcat webserver starts there should be at least 10 instances of connections to be created in the pool. Could any one please tell me how do I do this in the server configuration files (server.xml or web.xml).
Thanks in Adv.
JitDev2009Take note: the mbaworld.com site has its Tomcat setup/environment poorly configured that the documentation which came along with Tomcat setup became indexed by Google. It has further completely nothing to do with Tomcat itself. Please refer Tomcat's own homepage at [http://tomcat.apache.org] for the documentation.
-
Upgrade Java version in DB server.
Hi,
in my db server current version is:
[root@prod-db /]#java -version
java version "1.4.2"
To install TSM for oracle (tape backup) i was asked by SA to update server java version to jre1.7.0_07. But i have never done any work like this. Can any one help??user8983130 wrote:
My db version 11.2.0.2
OS RHEL 5.5 (64 bits each)
Actually i don't want to touch oracle/oracle software , i just want to upgrade java without hampering my oracle.Then you need to update the Java version installed in the o/s - and ignore what is installed in Oracle as that is not relevant to your problem.
What do you have installed? What Java components do you need?
You can check what is installed and available using the yum command. Basic Java can be installed using the java-<version>-openjdk.x86_64 package I think.
This is not a database question though, and I suggest that you either re-post your question to the {forum:id=822} forum, or that a moderator moves this posting there. -
Upgrade Java Version in 6i server
How can I upgrade the Forms Sever 6i 's java in order to run some java bean (compile by java jdk 1.4.2) ?
Hi Gary,
I'm not sure that U can get working. Only thing which I can say just upgrade your forms.
Regards,
Hamdy -
R12 upgrade , after 6678700, started services, listener.ora file missing
Hi ,
1)- Upgrading to r12 from 10.5.10.2
2)- 6678700 completed (so far just for US, not NLS).
3)-Just for testing purpose , when started services, got following errors related to listener.ora.
Please help.
Executing service control script:
/u01/oracle/inst/apps/TEST_epiktest/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_TEST.
adalnctl.sh: exiting with status 1
adalnctl.sh: check the logfile /u01/oracle/inst/apps/TEST_test/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
grep: /u01/oracle/inst/apps/TEST_test/ora/10.1.2/network/admin/listener.ora: No such file or directory
.end err out.grep: /u01/oracle/inst/apps/TEST_test/ora/10.1.2/network/admin/listener.ora: No such file or directoryPlease run AutoConfig and make sure it completes successfully -- AutoConfig will create the listener.ora file for you.
Thanks,
Hussein -
Full backup and upgraded my properly working Xserver 10.6.8 to Mavericks 10.9.1.
Web service running fine, File Service running fine.
Mail service: I can't send mail through my Mavericks Server.
(i think my mail.lukedesign.com is "offline")
What am I missing ? I can no longer send mail after the upgrade !
Helo command rejected: Server configuration
error (in reply to RCPT TO command)
Reporting-MTA: dns
X-Outbound-Mail-Relay-Queue-ID: 930307000008E
X-Outbound-Mail-Relay-Sender: rfc822;
Arrival-Date: Sat, 28 Dec 2013 17:48:36 -0500 (EST)
Action: failed
Status: 4.3.5
Remote-MTA: dns
Diagnostic-Code: smtp; 451 4.3.5 >: Helo command rejected:
Server configuration error
bh=LIrD+hJmwz+5MZLs4vaxCpbJMUJarfXJSIlQFwtzPV4=;
h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type;
b=aqJBFaESW7MinKgXTlokj6WU0UxrmNYjYsXhcedpJr1io9uJ82XuN+FjKF0SLtebQ
DhEIuYEEVU6sKsyh/y9+jKUtK2GCHexaXhWouA++9+FvT2NdqczDTdMEd/Q8kHdUOO
Vre27uIG4VlMMlFW9CScIt9ZL3qsH+xR3oKlT7JM=
x-aol-sid: 3039ac1af95452bf554450bb
<Email Edited by Host>Postfix Debugging Howto
-
Hi,
I am trying to configure relay server 16 for SMP2.3.
By refering link:-http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e084e63d-5764-2e10-bcb5-f943c11c6529?overridelayout=t…
Have successfully done with step:- Installing the Relay Server Components to IIS 7.x on Windows
And while performing step:-Configuring the Relay Server to Run as a Window Service on Relay Server in that after running the command mentioned:-
dbsvc -as -s auto -w SUPRelayServer "C:\inetpub\wwwroot\ias_relay_server\server\rshost.exe" -q -
qc -f “C:\inetpub\wwwroot\ias_relay_server\server\rs.config” -o “c:\Sybase\logs\rs.log”
I am getting with message :-
SQL Anywhere Service Utility Version 16.0.0.1535
Service "SUPRelayServer" was created successfully.
But when my trying to start relayserver services I am getting an error:-
Error
SQL Anywhere Service Utility Version 16.0.0.1535
Service "SUPRelayserver" start pending.
Error starting service "SUPRelayserver".
Log generated in my rs.log file
I. 2014-05-28 13:35:48.096+0530 Character encoding: windows-1252
I. 2014-05-28 13:35:48.096+0530 SAP Sybase Relay Server Version 16.0.0.1535
I. 2014-05-28 13:35:48.096+0530
I. 2014-05-28 13:35:48.096+0530 Copyright © 2013 SAP AG or an SAP affiliate company.
I. 2014-05-28 13:35:48.096+0530 All rights reserved.
I. 2014-05-28 13:35:48.096+0530 Use of this software is governed by the Sybase License Agreement.
I. 2014-05-28 13:35:48.096+0530 Refer to http://www.sybase.com/softwarelicenses.
I. 2014-05-28 13:35:48.096+0530
I. 2014-05-28 13:35:48.096+0530 Machine SUPSRV is running Windows 2008R2 Build 7601 Service Pack 1
I. 2014-05-28 13:35:48.096+0530 Software built for X86_64
I. 2014-05-28 13:35:48.096+0530 Time zone offset from UTC in minutes: 330
I. 2014-05-28 13:35:48.096+0530 <rshost> Parsing config file 'C:\inetpub\wwwroot\ias_relay_server\server\rs.config'
E. 2014-05-28 13:35:48.096+0530 <rshost> RSF11040: Cannot open Relay Server configuration file 'C:\inetpub\wwwroot\ias_relay_server\server\rs.config'
I. 2014-05-28 13:35:48.097+0530 <rshost> Finished
I. 2014-05-28 13:44:53.577+0530 Character encoding: windows-1252
I. 2014-05-28 13:44:53.577+0530 SAP Sybase Relay Server Version 16.0.0.1535
So can anyone please help me on this error.
Thanks & Regards,
AnjaliHi Anjali,
Check your rs.config file extensions. I faced the same issue & i rectified it by giving the correct extension to the rs.config file.
Thanks,
Shrikant Naidu -
Does anyone have a good server.xml file for tomcat?
I am trying to link apache and tomcat on a RedHat 9 computer. I previously posted a message stating that I could not get tomcat to "automagically" make the configuration files (mod_jk.conf-auto) that all the manuals promised it would. However, I found that my problem was the lack of an ApacheConfig tag in the server.xml file. After looking at my server.xml file, I found that it was much more simplistic than I would hoped = it did not have enough comments or commented out options. It had none of the directives that the manuals said it included by default.
In short, does anyone who has apache and tomcat linked have a server.xml file that I can look at so that I can figure out what I must add to mine to get tomcat working with apache? I would greatly appreciate it if you could copy and paste the whole thing here.
Thank you very much in advance.
Edward S. RiceHi!
I am having the Apache-Tomcat4.0 version installed on a Win2000 machine. I am pasting here my server.xml. Hope it will be useful to you. I even didnot do much modifications to my server.xml except for adding a context.
Please come back if problem persists.
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="60000"/>
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->
<!-- Define an SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="10" debug="0" scheme="https" secure="true">
<Factory className="org.apache.catalina.net.SSLServerSocketFactory"
clientAuth="false" protocol="TLS"/>
</Connector>
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<!--
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>
-->
<!-- Define a Proxied HTTP/1.1 Connector on port 8081 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8081" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="10" debug="0" connectionTimeout="60000"
proxyPort="80"/>
-->
<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8082 -->
<!--
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0"/>
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<Realm className="org.apache.catalina.realm.MemoryRealm" />
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority?user=test;password=test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL?user=scott;password=tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host -->
<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true">
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common"/>
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->
<!-- Tomcat Root Context -->
<!--
<Context path="" docBase="ROOT" debug="0"/>
-->
<Context path="/vijay" docBase="D:\Java\servlets" debug="0"/>
<!-- Tomcat Manager Context -->
<Context path="/manager" docBase="manager"
debug="0" privileged="true"/>
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<!-- PersistentManager: Uncomment the section below to test Persistent
Sessions.
saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 means unlimited sessions are allowed.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
maxActiveSessions. This avoids thrashing when the site is
highly active. -1 or 0 means there is no minimum - sessions
can be swapped out at any time.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.
To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
Catalina.
-->
<!--
<Manager className="org.apache.catalina.session.PersistentManager"
debug="0"
saveOnRestart="true"
maxActiveSessions="-1"
minIdleSwap="-1"
maxIdleSwap="-1"
maxIdleBackup="-1">
<Store className="org.apache.catalina.session.FileStore"/>
</Manager>
-->
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>user</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>driverName</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>
<!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
as its servlet container. Please read the README.txt file coming with
the WebApp Module distribution on how to build it.
(Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)
To configure the Apache side, you must ensure that you have the
"ServerName" and "Port" directives defined in "httpd.conf". Then,
lines like these to the bottom of your "httpd.conf" file:
LoadModule webapp_module libexec/mod_webapp.so
WebAppConnection warpConnection warp localhost:8008
WebAppDeploy examples warpConnection /examples/
The next time you restart Apache (after restarting Tomcat, if needed)
the connection will be established, and all applications you make
visible via "WebAppDeploy" directives can be accessed through Apache.
-->
<!-- Define an Apache-Connector Service -->
<Service name="Tomcat-Apache">
<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="10" debug="0"/>
<!-- Replace "localhost" with what your Apache "ServerName" is set to -->
<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0" appBase="webapps">
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<Realm className="org.apache.catalina.realm.MemoryRealm" />
</Engine>
</Service>
</Server> -
Where is the configuration file for my message server ?
Hi:
I am in charge for a message server version upration from 5.1 to 5.2, My question is very simply , I can not find configuration file for message server,when I execute start-msg [smtp | imap | pop | store | http] which configuration file it will read ?
and /usr/iplanet/server5/slapd-www/config/slapd.conf
is my ldap server configuration file ?
and the following three file is mta related file ?
/usr/iplanet/server5/msg-www-1/imta/config/dispatcher.cnf
/usr/iplanet/server5/msg-www-1/imta/config/job_controller.cnf
/usr/iplanet/server5/msg-www-1/imta/config/imta.cnf
My question is very simple and I am a new junior for ims . Anyway Thanks !!
$ imsimta version
iPlanet Messaging Server 5.2 (built Feb 21 2002)
libimta.so 5.2 (built 15:07:23, Feb 21 2002)
SunOS ctidml 5.8 Generic_108528-27 sun4u sparc SUNW,Ultra-5_10There is NO ONE messaging server configuration file.
The store configuration is read from the configuration ldap server on startup, and cached in temporary files, msg.cnf and local.cnf. Do not attempt to edit these files, as that won't work.
Use the configutil utility to see what the store configuratin is -
Create application server moves files from i drive to c drive?
Hello,
my set up:
windows 2003
sql server 2008
peopletools 8.51
application FMSC 9.1
PS Home on I:\TFS91
While setting up a demo system for FMSC 9.1, I noticed that the application server and process schedulers are being created on the C: drive.
This is strange because the PS Home are on the I: drive.
I start PSADMIN from the I drive, but every time I create an application server on the I drive it copies the application server to the C: drive.
Why is this happening?
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :FSDMO911
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 3
Creating domain...
Copying application server configuration files...
Copying to [C:\Documents and Settings\tuxadmin\ps
t\pt\8.50\appserv\FSDMO911\psappsrv.cfg]
Stripping Annotations...
Copying [I:] to [C:\Documents and Settings\tuxadmin\ps
t\pt\8.50\appserv\FSDMO911\psappsrv.cfx]
Copying Jolt repository file...
Domain created.
Would you like to configure this domain now? (y/n) [y] :
Quick-configure menu -- domain: FSDMO911
Features Settings
========== ==========
1) Pub/Sub Servers : No 15) DBNAME :[FSDMO911]
2) Quick Server : No 16) DBTYPE :[MICROSFT]
3) Query Servers : No 17) UserId :[QEDMO]
4) Jolt : Yes 18) UserPswd :[QEDMO]
5) Jolt Relay : No 19) DomainID :[TESTSERV]
6) WSL : No 20) AddToPATH :[C:\mssql\Binn]
7) PC Debugger : No 21) ConnectID :[people]
8) Event Notification: Yes 22) ConnectPswd:[peop1e]
9) MCF Servers : No 23) ServerName :[]
10) Perf Collator : No 24) WSL Port :[7000]
11) Analytic Servers : Yes 25) JSL Port :[9000]
12) Domains Gateway : No 26) JRAD Port :[9100]
Actions
=========
13) Load config as shown
14) Custom configuration
h) Help for this menu
q) Return to previous menu
Edited by: CLUTCH DBA on Feb 9, 2010 10:44 AMNote, if PS_CFG_HOME variable is not set, domains configuration files are going into the user path directory +%USERPROFILE%\psft\pt\<peopletools_version>+
Nicolas. -
Pointers for upgrading to new version of SQL Server?
We're running SAP Business One 2007 A (8.00.181) SP:00 PL:49
At the moment we have a dedicated server computer to host the SQL databases for this product. The server computer is 32-bit Windows Server 2003. The database server is SQL Server 2005 32-bit. This server was purchased in fall 2006 and had a fast disk subsystem for its day: 5x 15K UltraSCSI hard drives in RAID5.
We have several company databases, some of which are in the 12 - 13GB range in size. There are occasions where two or more of these large-ish databases may be in use simultaneously. Since SQL Server on the current server limits itself to 2GB RAM usage, I suspect there is a lot of paging to disk when multiple company databases are open, with a major hit on performance.
Windows Server 2003 goes end-of-life on July 15, 2015. SQL Server 2005 end-of-life is April 14, 2016. As part of a refresh of company IT infrastructure, we're considering replacing various physical servers with virtual servers. Ideally, we'd like to migrate the backend to a current version of SQL Server on a current Windows server OS, and also move to a 64-bit platform so we can allocate more RAM to SQL Server. We may also host virtual hard drive file(s) on SSD if/where that makes sense.
What I've found so far:
All the current SAP databases are Compatibility Level 90 (native SQL Server 2005)
The latest version of SQL Server that supports Compatibility Level 90 is SQL Server 2012. SQL Server 2014 drops support for 90. I assume it's a bad idea to change the database compatibility level?
If for any reason we have to stick with SQL Server 2005, the latest version of Windows that supports that is Server 2008 R2. That's not ideal, since in a perfect world we would want all virtual machines running Server 2012 R2
Moving to a 64-bit version of SQL Server requires a so-called "side-by-side" upgrade, it's not possible to use a SQL Server upgrade wizard
The VAR we used to install and configure the product in 2006 is no longer in business so we'd like (if possible) to do this ourselves. I'm a software developer familiar with client-server development, SSMS etc. so I feel reasonably confident in undertaking a side-by-side upgrade.
So, assuming we'd like to migrate the backend to 64-bit SQL Server 2012, can anyone offer any pointers, experiences, or things to watch out for?
There are also some services running on the current server computer, which I'm assuming will also need to be migrated:
SAP Business One Integration Service
SAP Business One License Manager 2007
SAP Business One Messaging Service
I get the feeling other people may have asked similar questions before, but I couldn't find any relevant posts.
Thanks in advance for any help.You probably need to do an installer file clean up for Apple Software Update with the Microsoft Installer Cleanup Utility.
Here is a method for removal and clean up of iTunes and related programs. You might get away with just doing the Apple Software Update part rather than the whole thing. I would try just removing and cleaning ASU first.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes. -
Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day! -
Help - SQL 2008 - SP4 Install Fails - Server is in script upgrade mode - Server Down
Login failed for user 'CS\XXXXXXXXXXX'. Reason: Server is in script upgrade mode. Only administrator can connect at this time. [CLIENT: <local machine>]
Clearing tempdb database.
Bits:
Windows 2003 Server Std SP2
SQL Server 2008 SP3
SQL Server has been running without issue. Installed on another SS2K8 SP3 and worked fine.
Any assistance would be appreciated as this issue is causing problems for my user applications.
Thank You
Mark CovianSet Trace Flag -T902
Start the SQL Server and it shuts down
2015-01-28 09:41:00.00 Server Microsoft SQL Server 2008 (SP4) - 10.0.6000.29 (Intel X86)
Sep 2 2014 22:55:13
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition on Windows NT 5.2 <X86> (Build : )
2015-01-28 09:41:00.00 Server (c) 2005 Microsoft Corporation.
2015-01-28 09:41:00.00 Server All rights reserved.
2015-01-28 09:41:00.00 Server Server process ID is 6564.
2015-01-28 09:41:00.00 Server Authentication mode is MIXED.
2015-01-28 09:41:00.00 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2015-01-28 09:41:00.00 Server This instance of SQL Server last reported using a process ID of 7580 at 1/28/2015 9:32:48 AM (local) 1/28/2015 4:32:48 PM (UTC). This is an informational message only; no user action is required.
2015-01-28 09:41:00.00 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T902
The ALL permission is deprecated and maintained only for compatibility. It DOES NOT imply ALL permissions defined on the entity.
Adding user 'CS\X910401' to SQLAgentUserRole msdb role...
Performing replication job security meta-data upgrades...
Attempting to load library 'xprepl.dll' into memory. This is an informational message only. No user action is required.
Using 'xprepl.dll' version '2007.100.1600' to execute extended stored procedure 'xp_repl_encrypt'. This is an informational message only; no user action is required.
Error: 515, Severity: 16, State: 2.
Cannot insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.
Error: 912, Severity: 21, State: 2.
Script level upgrade for database 'master' failed because upgrade step 'sqlagent100_msdb_upgrade.sql' encountered error 515, state 2, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script upgrade steps run to completion.
Error: 3417, Severity: 21, State: 3.
Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/ ] for the SQL Server service.
The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/R:1433 ] for the SQL Server service.
Mark Covian -
i connect to Facebook through Thunderbrowse. Since you've upgraded, I can not longer connect. I received this message;
Secure connection failed
An error occurred during a connection to www.facebook.com. The server rejected the handshake because the client downgraded to a lower TLS version than the server supports. (Error code: ssl_error_inappropriate_fallback_alert)
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.Also tried with NoScript disabled. Doesn't work any better. You can actually see the youtube front page sometimes getting stuck in a half-formatted mode. Maybe it really is Google and it's just the error message that is wrong.
-
I currently have iTunes version 7 on my computer and need to upgrade to version 10 to sync my new nano iPod. When I tried the "check for updates" under the version 7 "help" menu, it said it could not contact the update server. I am afraid if I just download version 10 from the website, it will wipe out my music library. What should I do to upgrade?
Back up your music and install from the website. You probably won't need to do this, but if your library is erased, restore it from the backup.
(59049)
Maybe you are looking for
-
Can't open RAW .NEF images in Photoshop CS5
I am desperate to fix this issue because my photoraphy business has been on hold all week due to this issue. Anyway, I can't open any RAW files in ACR or Photoshop CS5. It craashes instantly every time when attempting to open .NEF files from my Nikon
-
Is there any way to download SD movies in iOS?
As I'm preparing my iPad for a family trip I'm realizing that Apple has increased the difficulty of access to this once-useful feature of movies and iOS. I purchase all of my movies in HD, but there has always been the option of accessing the SD vers
-
HELP ME!!!!!!!! I CAN'T WATCH VIDEOS ON MY IPOD!
someone please help me my ipod was working fine i could watch videos and everything was great until one day it started freezeing everytime i tryied to watch a video but i kept trying until one day it asked me to restore the ipod so i did but it kept
-
Trouble with updating child pages in dreamweaver cs4
Hello, I have added some advertising links to my template page in Dreamweaver CS4 and it doesn't update my child pages for some reason. I have saved the template and synchronized the sitewide as normal but it isn't updating them. Any suggestions wo
-
We use several forms on our websites that are processed by a formmailer and then send to us via e-mail. In order to ensure that these forms are reaching us in any case, I want to whitelist my e-mail addresses in SpamAssassin. I did so by adding these