BP choicefield 'active' 'inactive' replicated to crm ?

Hello,
in msa there is a choicefield 'active' or 'inactive' which I can set for a bp.
Is this replicated to crm afterconntrans ? Where can I find
Thanks for response,
Gerd

Hello Gerd,
This is a mobile only field and is not transferred to CRM Online.
When you mark a bp as inactive in Mobile, then it is not available to create transaction data in Mobile only.
Best Regards,
Aparna

Similar Messages

Configuration is not replicated from CRM to ECC for configurable product

Hi,
We have some materials in the system for which the configuration is not replicated from CRM to ECC.
We create a quotation in CRM and configure it. In CRM, the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
Please find below finding
1. If the same material is created in another plant/company code, the configuration is replicated properly.
2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC), it is properly exploded and complete.
3. variant prices are replicated properly even though components are not replicated.
We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
Please advise.
Thx.

the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

When replicating customer from ERP, the address is not replicated to CRM.

Hello.
I'm facing the problem which the address data of customers is not replicated to CRM.
I've checked the business object BUPA_MAIN on t-cd SMW01, so I found that the task of addresses is "S" and it doesn't get GUID.
I'm not sure, but I doubt the error is caused by creating a new client in CRM.
In other words, I doubt that the setting of replicating the address data of customer is not active.
Does anyone have the knowledge of this problem?
BestRegards.
Miki

Hi Hedy,
Please go through this following note
Note 1511835 - Incomplete addr sent to CRM causing failed duplicate check
Hope it answers your Query
All the Best
Regards,
Srikanth.Naga

Company code data for custom replicated from CRM

Hi,
I am trying to default the company code data for a BP replicated from CRM as a customer but it is not working.
How should this be done in CRM 7.0, ECC 6.
I am have so far copied function module SAMPLE_INTERFACE_DE_BALE, added my own code and created the entry in table TBE34. But it doesn't work. Is this correct or is there another method?
regards
Tim

This is what we did wen we had a similar requirement...
u2022     In the ECC create a FM u2018Z_USER_EXIT_BEFORE_SEND_TO_MWu2019.
u2022     Register this function module for the CRM0_200 exit user in the ERP system.
a.     Use Transaction SM30, table TPS34, to go to the maintenance of the modules. Here, enter the Z_USER_EXIT_BEFORE_SEND_TO_MWu2019 module for the CRM0_200 process.
b.     Use Transaction SM30, table TBE24, to check whether the application you have selected (Product column in TPS34) is active.
u2022     The FM will be triggered whenever a Sold gets successfully replicated from CRM to ECC system.
a.     Check for the Object Class u2018BUPAu2019.
b.     Check for the Object Name u2018CUSTOMER_MAINu2019.
c.     If yes copy the BP GUID from the BAPIMTCS Structure.
d.     Now call rfc FM ZLSD_BP_EXTRACT_FRM_GUID in CRM to get the BP number and Acc Group for the respective GUID.
e.     Check if the ACC GRP is Z001.
f.     If yes make a BDC call to transaction FD01 and update the Company Code data u2026. Recon. Account     110000
                             Terms Of Payment ZN30
                           for the respective BP
Note: we have recorded a BDC program to create the company code data.
regards,
Sameer Ahamad

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Customer Address Not getting replicated to CRM

Hi,
In CRM system we had created on BP and replicated to ECC system. Replication was done successfully. In ECC now we had modified some of the details like Name, Address, contact details. From this updated details only address is not getting replicated to CRM system.
While all the other data which are modified are getting replicated to CRM system. In case if some one has encountered this issue then please me know the solution step.
Does SAP support the modification and replication of business partner address from the third system (System in which it is not created)
With Regards
Ankush Rai

Hi Rai
Please check the following thread , It may helpful your query
Re: When replicating customer from ERP, the address is not replicated to CRM.
Hope it solved your issue
Regards,
Naga.Srikanth

Contact person replicating to crm from R/3

Hi All,
When we add a contact person to a customer in ECC, it is not replicated to CRM. 2 BDOC type is created, BUPA_MAIN and BUPA_REL. In BUPA_MAIN bdoc, the guid number and partner number is filled, but in BUT000 table there is no entry. So, in BUPA_REL bdoc the error "Enter at least one number for the business partner" (R11 123) occurs. We cannot replicate the contact person to CRM from ECC.
Thanks for help.

Hi,
Refer to this thread
Business Partner Exchange CRM -> R/3
Shridhar

Cash discount - F-28 - how to control Active / Inactive setting

Hi All,
When I try to post incoming posting through F-28 for a customer and choose the open items, the cash discount value is INACTIVE.
But when another user tries to post incoming payment for the same customer, Cash discount value is ACTIVE.
We are building a custom program for clearing the open items, so this is causing some discrepancies in the amount to be posted.
We checked the editing options(OPEN ITEMS tab) and it looks same for both of us.
Can anyone please let me know if there is any setting through which we can control the cash discount (ACTIVE / INACTIVE)
Thanks in advance.
Krishna

Please try executing f-28 once again and check case discount column, if it is not there, execute transaction /nSU53 and check the authorization which is missing in your case.
Hope this helps!!!
Regards,
Murlidhar Khatri

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

Data source was activated and replicated but not showing up in RSA7.

Hello,
Data source was activated and replicated but not showing up in RSA7. At what point does the data source appear in the Delta Queue?
Thanks

Hi,
for LO,LIS,generic,FI data sources, delta records come from delta queue.
if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
when the init request goes to R/3 then it will maintains delta queue in RSA7.
assign points if it helps,
thanks,
pavan.

How to notify a team when Product is replicated to CRM from MDM?

Hi All,
MDM is the back-end for SAP CRM in our project. Product is created and replicated from MDM to CRM via XML interface for Products, it is one way replication process. Recently we have implemented Opportunity management in which these products are being used. For that, we have updated Sales Area and Pricing to all the products in CRM with a custom report.
Now the requirement is, when a product is created and replicated to CRM from MDM, a team should be notified about this. So that, they would maintain the responsible sales area and pricing in replicated Product to use it in Oppt.
Could you please guide me how to map this requirement in our system. Kindly help me with the feasibility and solution overview of the above requirement.
Thank you in advance.
Regards,
Maddy

Hi Maddy,
Would recommend workflow technique to explore if you have not done yet. Refer below link which I believe will help you a lot.
SAP MDM Workflow
Rgds
Hari

Table name to display status for maintenance plan with active /inactive status

i need status table which display only active/inactive status of the maintenance plan.

really it helps me ..........
thanks raymond
regards,
priya

Only Sales Organitation to be replicated to CRM from R3

Hi All,
In R3 we have created the 2 sales Orgs (Company Codes: 1000,2000) and in CRM we have successfully extracted/replicated the R3 Sales Structure . but i have a situation where i only want the Sales Organization (2000) which i want t use it as Marketing Organization for marketing purposes.
i have been to "Copy SAP ECC Sales Structure" page the to replicate the Sales Org but here i can see the combination of Sales OrgSales OfficeSales Group but i want only 2000 Sales Org to be replicated in CRM.
or shall i create 2000 here in CRM as Marketing Org Manualy.
Thanks and Regards,
Arun

Hello Arun,
You want to use only one Sales Organization 2000 in SAP CRM.While copying the organization structure in T Code CRMC_R3_ORG_GENERATE ("Copy SAP ECC Sales Structure") select only one Row which has 2000 as a sales Organization.Then click on "Generate Selected Lines".Click on SAVE at the end.
This will create only one sales organization in SAP CRM. After that go to PPOMA_CRM & mark this Organization as Marketing Organization as well.
Regards,
Rajendra Sonawane

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

[SOLVED]What is the meaning of any/active/inactive session in polkit?

Wiki said ｢inactive sessions are generally remote sessions (SSH, VNC, etc.) 」.
So I changed the *.policy file like below to execute the action without password only when I am logging in remotely.
(Just for clarifying the difference between any/active/inactive session.)
<allow_any>no</allow_any>
<allow_inactive>yes</allow_inactive>
<allow_active>no</allow_active>
Contrary to expectations, I couldn't execute the action remotely without password.
So I changed again like below.
<allow_any>yes</allow_any>
<allow_inactive>no</allow_inactive>
<allow_active>no</allow_active>
This time, I was able to execute the action remotely without password.
From the above, I think the remote session is neither active nor inactive.
Is it true? If so, what is the inactive session?
What is the definition of active/inactive?
Last edited by remingtontonpon (2014-08-04 06:16:52)

'man polkit' explains that 'allow_inactive' and 'allow_active' are for sessions on local consoles.
Only 'allow_any' applies to any client local or remote.
This seems confirmed by what you observe on your machine.

BP choicefield 'active' 'inactive' replicated to crm ?

Similar Messages

Maybe you are looking for