BP Dms Connector no show files

HI,
We are at EP 7.0 SP 18 and ECC 6.0
I deploy the BP DMS Connector KM 1.0 ( BPDMSCONN00_0-20000787)
We assign the Role  Document Explorer
We follow the instructions in the Library.
In the role we see the carpet dmsrm and below it the carpet Dynamic Carpet
But do not see any files in the folder¡¡¡¡
We think is a problem in DMS don not permit to see the files.
someone had made the procedure in DMS and KM to see the files?.
if we pretend to create a carpet, we see some data of the DMS, so, we know the communication is correct between KM and ECC.
Thanks

Tomas,
The variantprefix is very important. It is defined in the repository service as KM_. Use this to define variants in the DMS. They will then automatically appear in the /dmsrm.DynamicFolder as folders with the description name you gave the variant in DMS. To be able to edit documents and create folders, you need to ensure that you have the Document Manager role assigned to the user who will be maintaining. this role is delivered with the Business package for DMS Connector for KM. Further info can be found in the documentation "Business Package for DMS Connector for KM" that you can obtain from the following website: https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio then select the Package documentation Link.
Also, set the properties repository service in the DMSRM repository manager. This will help in indexing the documents should you have Trex installed.
Just a thought, though. Instead of using the Document Explorer, it may be better to provide your users with a KM Navigation Iview, with Breadcrumbs removed and Presenation changed. Alternatively, create a web page (or pages) to the variants in the Dynamic Folder and have a graphical user interface instaed of the explorer interface. Just a thought.
Regards,
Ed B.

Similar Messages

  • DMS Connector for KM 1.0 set DMS subfolders as root for DocumentExplorer

    I have three folders under the root folder of DMS Connector:
    Bills
    Tickets
    TechnicalData
    I want an independent document explorer iView for the first two and the third one not being displayed on the EP.
    So I put '/dmsrm/Bills' as root navigation folder and initial navigation folder. If I do this the Document Explorer shows an error saying the selected resource does not exist or is not available. If i set '/dmsrm' folder there is no problem but then I can't separate different subfolders in different iViews.
    How can I make it for the subfolders to be the root folder of Document Explorer?
    Thanks in advance and best regards,
    Ibai

    I have the same problem!!!!
    how could you solve it??
    thanks in advance!!!
    Regards

  • DMS connector

    Hi,
    I face some problems with the new DMS connector (ECC6):
    I have assign the “Document Manager” role to a user (this user have full right in the ERP system), in the iview I see under the dynamic folder a KM folder (a variant system KM have been created in ERP system).
    1- I see the list of the files in the KM folder, and I would like to see the FID containing these files. How to make this, if it’s possible?
    2 – If I want to create a new folder or make an upload since the document manager, I have the error message: “The item could not be created because an exception occurred in the framework”.
    3 - If I want to copy or move a file I have the error message: “Target must be a real document-based structure”.
    4 –  And to finish, I don’t see the “Public Documents” under the “Dynamic Folder”, nevertheless  I have created a document structure with the document number EDIPUBLICROOTFOLDER in the ERP system.
    For your information, I work on E  P 7.0 SP11 (Netweaver 4s)
    Thanks in advance.

    Hi,
    I am also getting “Target must be a real document-based structure”. at the time of uploading of a document.
    Is your problem solved? Can u please share the solution.
    Thanks in Advance,
    Amit

  • Timing on installing and configuring DMS Connector

    Hi all,
    I have read many of the documentation that the help offers regarding the Business package of DMS Connector, but i am not clear on what are the steps involved in the configuration.
    Does anyone have a check list of what are the steps involved in the installation of these Business Package.
    Regards,
    Orlando Covault

    First time iset up Sol8 Native LDAP login, it took me three days. Now it takes me an hour or so.
    Setting up LDAP is easy, setting up LDAP for solaris8 login (replacement for NIS) is a bit hard, because you need to know/have all the LDIF files, aci's etc.
    I can send you the required files & procedure offline if you want (send me a message [email protected] )
    Regards,
    Niels

  • DMS connector to KM

    Hi experts,
    I hope someone could help me with my problem. We have installed DMS connector on our EP 7.0, configured it, but even though the connection to R/3 is all right the document explorer shows me just 'dmsrm' folder (which corresponds to Prefix attribute set for DMSRMRepositoryManager) with no content in it.
    Can someone explain me what needs to be done to get the backend content (documents) displayed in portal? Does it have anything to do with selection variants in R/3?
    Thanks a lot for any help at all.
    Regards,
    Frank

    Hi Camilla,
    These Documents will help you make required settings for DMS connector in KM
    [Initial Configuration Steps|http://help.sap.com/saphelp_erp2004/helpdata/en/e6/8eae22d46455479a09f7ba5f12730e/content.htm]
    [Making Settings for mySAP ERP DMS Connector for KM |http://help.sap.com/saphelp_erp2004/helpdata/en/32/2a840d132af04fa2f0b31ebf3e8a78/frameset.htm]
    [iViews in mySAP ERP DMS Connector for KM |http://help.sap.com/saphelp_erp2004/helpdata/en/0f/6be4a34c47844284ab8102489dc3e2/content.htm]
    Hope this helps,
    regards,
    Shailesh Nagar

  • DMS Connector error while creating folder and uploading document.

    Hi,
    I have configure DMS connector on Portal with ECC. We are able to see /dmsrm -->Dynamic folder and also variant available in ECC and files in variant.
    When i try to create new folder in variant, i am unable to create folder . It give me error.
    The item could not be created because an exception occurred in the framework
    Also i get same errror when i upload new document in same variant.
    Please help out.
    Regards
    Biren

    Hi Biren,
    Is your issue resolved?
    Even I am not able to upload/create documents.
    One thing I learnt is you can not create/upload files at the variant level.
    You need to create a subfolder under the variant and then you cna create/upload files.
    But for me at the subfolder level I am getting "No document Type Specified error"
    Regards,
    rao

  • Business Package for DMS Connector for KM

    Hi,
    We have installed the Business Package for DMS Connector for KM 1.0
    after downloading from the SolMan. After the install we wish to
    configure it to point to the proper repository in our R/3 landscape.
    But when we go to System Administration->System Configuration-
    >Knowledge Management ->Content Management ->Repository Managers we do
    not see a repository called DMSRMRepositoryManager. We are stuck
    without this as the iView: Document Explorer is not working.
    Please let us know what is the problem with this.
    We are on
    1) ECC6.0
    2) EP7.0 SPS10
    3) Business Package for DMS Connector for KM 1.0
    Regards
    Jay Kapadia

    Hi,
    I had the same problems.
    Better you open a message to this issue.
    In the Business package there should be two files.
    epa and ear
    regards,
    Darijo

  • SAP DMS CONNECTOR FOR KM

    Hi,
    We have deployed "Business Package for DMS Connector for KM (BP DMS CONNECTOR KM 1.0 )" on EP environment.
    The following business Package applied on EP.
    BP for DMS Connector KM 1.0 (BPDMSCONN00_0-20000787.sca)
    We are getting the Role "pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase"
    on the EP. We have added this Document Manager Role to the user and getting the "Document Explorer" tab/Workset on the EP header.
    But we are getting the following error on clicking on this workset
    "Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer
    Component Name : com.sap.km.cm.navigation
    com/sapportals/wcm/util/pcr/PortalComponentRequestCache.
    Exception id: 04:58_12/07/07_0008_11485350
    See the details for the exception ID in the log file"
    Do we have to Install the following SAP DMS Connector apart from the Business Package already Installed?
    Navigation: Installations and Upgrades
    Installations and Upgrades> Supplementary Components for Cross Industry Solutions> Life-Cycle Data Management> SAP DMS CONNECTOR FOR KM> SAP DMS CONNECTOR FOR KM 60.1
    The File details are as follows
    SAP DMS CONNECTOR FOR KM 60.1.1 (com.sap.pct.plm.dms.dms_km_connector.epa, DMSRepositoryConnector.par and ReadMe_Notes_785193_824325.txt)
    Pls let me know how we can get DMS iViews on EP ?
    Pls guide me on this.
    Thanks and warm regards
    Purnendu

    When using the DMS Connector with EP7 please see to implament Note 1143726 - DMS-KM Connector Repository fails to start

  • When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes.

    When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes...Help???

    Check for Update (tap to enlarge image)

  • How to make Finder NOT to show files from a specific folder in "All My Files"?

    Hello!
    Can someone please advice how to make finder NOT to show files from a specific folder in "All My Files"? See the attach - I recently installed Civilization 5 from Steam and now I have a lot of unneeded files (*.log and *.ini) shown in  All My Files colder in Finder.
    I don't want to see them. Any advise?

    Using "All my Files" was very handy before all this rubbish popped up. =(

  • DMS Connector for KM : I see only one document type from the document area

    Hi,
    The DMS connector is installed successfully on KM.
    I can display folder tree and documents but I see only one type of document.
    I mean, when I use transaction OAC0, I see different content repository defined in DMS.
    I wonder where is the setting that specified which content is link to the DMS connector for KM.
    Thanks in advance.

    Hello Zbynek,
    I installed the DMS once, but my experience how to use it is poor.
    In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
    It is not much, but maybe it helps...
    best regards
    Guido

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

    Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
    Can anyone please help?
    Thanks

    The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
    You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
    What you are doing to sync them should work i.e.
    - connecting the iPad to your Mac
    - selecting the iPad on your Mac's iTunes
    - selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
    You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there  then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
    By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
    And do a soft-reset and retry syncing.
    I assume that music and other items sync ok ?

  • Indesign CS4 in Mac 10.6.8, sometimes won't show files, sometimes won't show tools

    Indesign CS4 in Mac 10.6.8, sometimes won't show files, sometimes won't show tools. Like I click to open a file from the finder, and Indesign makes that temporary file in the finder, but won't display the pages. At other times I can have the pages displayed but I can't open the tools such as the colour swatches or the paragraphy styles. This all happens at random, although I suspect it is more likely to happen if I have been working in some other program such as Typestyler or Aperture, and come back to Indesign. Kind of like Indesign gets snooty at me working in another program.
    I've done the thing of dicing the preferences, but so far the only workaround that has worked so far is quitting and restarting the program. I don't remember this happening so much until recently, in other words the problem seems to be getting more frequent.
    But I am wondering if this has happened with anyone else and if there are any other suggestions for avoiding it.
    Back in the good old days you would reinstall PageMaker and that would settle things for a while. But now I don't know if a program like Indesign CS4 actually gets corrupted and if it does I don't know what to do. Does the program get corrupted? And should you reinstall a fresh copy? If it's a good idea to reinstall the program how do you do that? Is it possible to download a fresh copy? And if I do, what happens when the fresh copy phones home? I've tangled with the Adobe Microsoft corporation before when Indesign phoned home and got a crossed line.

    Other things to try:
    Examine your specific version of Optima by going to Type menu > Find Font, clicking on the Optima font and choosing More Info (I think) and find the specific version number. See if you can uninstall the font and reinstall another Optima font with a different, preferably newer version number. There has (historically) been a bad version of Optima floating around for years. Maybe you have it.
    Use a free utility like FontNuke or FontFinagler to get your Mac OS to reset its font plists. Sometimes that makes the OS feel better.
    Use the built-in Disk Utility to repair file permissions. You never know.
    Export your old document out to IDML and reopen that resulting idml file back into a new freshly written INDD file. This might remove internal database corruptions.
    All these are chicken-soup things to try and they might be good for you.
    Best,
    Mike Witherell in Florida

  • Show file name

    Is there a way to show file names with the events, in the event library window?

    Sevy2205 wrote:
    ...  I imported a large number of files and I want to make sure I have them all and they are some I want to identify quickly, I am looking for a way to see the file name in the event library....
    that is beyond the CONCEPT of this 15€ consumer product
    iM is meant for camcorder-imports - cams give automatic file-names with very little information (clip001); the more important info are in the meta-tags (when, perhaps where, after analyzing who, what) .. so, from the intended perspective of this app, there's no need/function to display clip-names.
    the EVENT-concept structures on time-stamp, based upon the assumption, you record your movies on some 'daily' basis, think of vacations, city-trips, holidays ...
    for your workflow, using 'files', I would suggest to prep all files in Finder, create folders, re-name them, arrange them (you do know, in Finder hitting Space-bar when a file is selected, it shows a preview? video as motion pictures?), whatever to structure them, THEN import to iM for editing.-

Maybe you are looking for